Heavy Metals Removal from Water by Efficient Adsorbents
Open accessThe DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Abstract
Natural occurrence and anthropogenic practices contribute to the release of pollutants, specifically heavy metals, in water over the years. Therefore, this leads to a demand of proper water treatment to minimize the harmful effects of the toxic heavy metals in water, so that a supply of clean water can be distributed into the environment or household. This review highlights several water treatment methods that can be used in removing heavy metal from water. Among various treatment methods, the adsorption process is considered as one of the highly effective treatments of heavy metals and the functionalization of adsorbents can fully enhance the adsorption process. Therefore, four classes of adsorbent sources are highlighted: polymeric, natural mineral, industrial by-product, and carbon nanomaterial adsorbent. The major purpose of this review is to gather up-to-date information on research and development on various adsorbents in the treatment of heavy metal from water by emphasizing the adsorption capability, effect of pH, isotherm and kinetic model, removal efficiency and the contact of time of every adsorbent.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The Lancet Commission on pollution and health
Landrigan, P. J., Fuller, R., Acosta, N. J. R., Adeyi, O., Arnold, R., Basu, N. (., Baldé, A. B., Bertollini, R., Bose-O'Reilly, S., Boufford, J. I., et al. (2018) · The Lancet · doi:10.1016/s0140-6736(17)32345-0 · Cited by 4,929 · cited 1×
“Until recent years, it was studied that pollution accounts for 16% of all deaths globally and 9 million deaths nationwide, with a comparison of three times the deaths as malaria, tuberculosis, and acquired immunodeficiency syndrome (AIDS) put together [5].”
BackgroundHeavy Metal Pollution in the Environment and Their Toxicological Effects on Humans
Briffa, J., Sinagra, E., & Blundell, R. (2020) · Heliyon · doi:10.1016/j.heliyon.2020.e04691 · Cited by 4,402 · cited 3×
“These ores are associated with occurrences of high arsenic and lead contamination [10].”
BackgroundInfluentialAdsorption isotherm models: Classification, physical meaning, application and solving method
Wang, J., & Guo, X. (2020) · Chemosphere · doi:10.1016/j.chemosphere.2020.127279 · Cited by 2,289
A review of biochar as a low-cost adsorbent for aqueous heavy metal removal
Inyang, M. I., Gao, B., Yao, Y., Xue, Y., Zimmerman, A., Mosa, A., Pullammanappallil, P., Ok, Y. S., & Cao, X. (2016) · Critical Reviews in Environmental Science and Technology · doi:10.1080/10643389.2015.1096880 · Cited by 1,397
Role of nanomaterials as adsorbents in heavy metal ion removal from waste water: A review
Wadhawan, S., Jain, A., Nayyar, J., & Mehta, S. K. (2020) · Journal of Water Process Engineering · doi:10.1016/j.jwpe.2019.101038 · Cited by 530
Cited by
Mane, P. V., Rego, R. M., Yap, P. L., Losic, D., & Kurkuri, M. D. (2024) · Progress in Materials Science · doi:10.1016/j.pmatsci.2024.101314 · Cited by 271
Gasim, M. F., Choong, Z.-Y., Koo, P.-L., Low, S.-C., Abdurahman, M.-H., Ho, Y.-C., Mohamad, M., Suryawan, I. W. K., Lim, J.-W., & Oh, W.-D. (2022) · Catalysts · doi:10.3390/catal12020210 · Cited by 76
“In addition, the enthalpy of physisorption (20–40 kJ/mol) is less than that of chemisorption (200–400 kJ/mol) [120,121].”
BackgroundA comprehensive review of nanomaterials for efficient heavy metal ions removal in water treatment
Feisal, N. A. S., Kamaludin, N. H., Ahmad, M. A., & Tengku Ibrahim, T. N. B. (2024) · Journal of Water Process Engineering · doi:10.1016/j.jwpe.2024.105566 · Cited by 68
Metadata
- Authors
- Zaimee, M. Z. A., Sarjadi, M. S., & Rahman, M. L.
- Venue
- Water
- Publisher
- MDPI AG
- Published
- 2021-09-27
- Volume
- 13
- Issue
- 19
- Pages
- 2659
- ISSN
- 2073-4441 (ISSN-L)
- OpenAlex
- W3203619972
- Cited by
- 213
- References
- 5
- FWCI
- 7.95
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.