Comparison of Configurations for High-Recovery Inland Desalination Systems
Open accessThe DOI matches its Crossref record.
Abstract
Desalination of brackish groundwater (BW) is an effective approach to augment water supply, especially for inland regions that are far from seawater resources. Brackish water reverse osmosis (BWRO) desalination is still subject to intensive energy consumption compared to the theoretical minimum energy demand. Here, we review some of the BWRO plants with various system arrangements. We look at how to minimize energy demands, as these contribute considerably to the cost of desalinated water. Different configurations of BWRO system have been compared from the view point of normalized specific energy consumption (SEC). Analysis is made at theoretical limits. The SEC reduction of BWRO can be achieved by (i) increasing number of stages, (ii) using an energy recovery device (ERD), or (iii) operating the BWRO in batch mode or closed circuit mode. Application of more stages not only reduces SEC but also improves water recovery. However, this improvement is less pronounced when the number of stages exceeds four. Alternatively and more favourably, the BWRO system can be operated in Closed Circuit Desalination (CCD) mode and gives a comparative SEC to that of the 3-stage system with a recovery ratio of 80%. A further reduction of about 30% in SEC can be achieved through batch-RO operation. Moreover, the costly ERDs and booster pumps are avoided with both CCD and batch-RO, thus furthering the effectiveness of lowering the costs of these innovative approaches.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
The state of desalination and brine production: A global outlook
Jones, E., Qadir, M., van Vliet, M. T. H., Smakhtin, V., & Kang, S.-M. (2019) · Science of The Total Environment · doi:10.1016/j.scitotenv.2018.12.076 · Cited by 1,971
Comparative study of brine management technologies for desalination plants
Morillo, J., Usero, J., Rosado, D., El Bakouri, H., Riaza, A., & Bernaola, F.-J. (2014) · Desalination · doi:10.1016/j.desal.2013.12.038 · Cited by 374
Garfí, M., Cadena, E., Sanchez-Ramos, D., & Ferrer, I. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.07.218 · Cited by 172
“In scenario 2, the cost was estimated from conventional water treatment and desalination plants in the Mediterranean region (Salcedo et al., 2012; Triki et al., 2014).”
BackgroundA review of spiral wound membrane modules and processes for groundwater treatment
Tabi, R. N., Boakye, P., Agyemang, F. O., Nxumalo, E. N., & Oduro-Kwarteng, S. (2024) · Frontiers in Membrane Science and Technology · doi:10.3389/frmst.2024.1343651 · Cited by 9
Metadata
- Authors
- Qiu, T., & Davies, P. A.
- Venue
- Water
- Publisher
- MDPI AG
- Published
- 2012-09-17
- Volume
- 4
- Issue
- 3
- Pages
- 690-706
- ISSN
- 2073-4441 (ISSN-L)
- OpenAlex
- W2061446116
- Cited by
- 116
- References
- 0
- FWCI
- 2.91
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.