Investigating the Vulnerabilities of Structures to Ignition From a Firebrand Attack
Open accessThe DOI matches its Crossref record.
Abstract
A unique experimental apparatus, known as the Firebrand Generator, was used to generate a controlled and repeatable size and mass distribution of glowing firebrands.The size and mass distribution of firebrands produced from the generator was selected to be representative of firebrands produced from burning vegetation.The vulnerability of roofing materials to firebrand attack was ascertained using fluxes of firebrands produced using this device.The experiments were performed at the Fire Research Wind Tunnel Facility (FRWTF) at the Building Research Institute (BRI) in Tsukuba, Japan.A custom mounting assembly was constructed to support full scale sections of common roofing materials inside the FRWTF.The sections constructed for testing included full roofing assemblies (base layer, tar paper, and shingles) as well as only the base layer material, such as oriented strand board (OSB).The custom mounting assembly allowed for the construction of flat roofs as well as the construction of angled roofs (valleys).Results of this study are presented and discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
The wildland–urban interface fire problem – current approaches and research needs
Mell, W. E., Manzello, S. L., Maranghides, A., Butry, D., & Rehm, R. G. (2010) · International Journal of Wildland Fire · doi:10.1071/wf07131 · Cited by 444
Self-citationFirebrands and spotting ignition in large-scale fires
Koo, E., Pagni, P. J., Weise, D. R., & Woycheese, J. P. (2010) · International Journal of Wildland Fire · doi:10.1071/wf07119 · Cited by 336
“Recently, Manzello et al. developed a unique experimental apparatus, known as the Firebrand Generator (Manzello et al. 2008a), used to generate a controlled and repeatable size and mass distribution of glowing firebrands (Manzello et al. 2007b, 2008b).”
MethodCaton, S. E., Hakes, R. S. P., Gorham, D. J., Zhou, A., & Gollner, M. J. (2017) · Fire Technology · doi:10.1007/s10694-016-0589-z · Cited by 241
Hakes, R. S. P., Caton, S. E., Gorham, D. J., & Gollner, M. J. (2017) · Fire Technology · doi:10.1007/s10694-016-0601-7 · Cited by 112
Metadata
- Authors
- Manzello, S., Shields, J., Hayashi, Y., & Nii, D.
- Venue
- Fire Safety Science
- Published
- 2008
- Volume
- 9
- Pages
- 143-154
- ISSN
- 1817-4299 (ISSN-L)
- OpenAlex
- W1975007986
- Cited by
- 36
- References
- 0
- FWCI
- 10.97
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.