Student or educator? Sign up with your school email and get 6 months of Pro free.
Cited by 301

The DOI matches its Crossref record; 10 of the 10 references it cites were found in a registry or an index.

A review of helicopter‐borne electromagnetic methods for groundwater exploration

Siemon, Bernhard, Christiansen, Anders Vest, Auken, Esben · 2009 · Near Surface Geophysics

Abstract

For about three decades, airborne electromagnetic (AEM) systems have been used for groundwater exploration purposes. Airborne systems are appropriate for large‐scale and efficient groundwater surveying. Due to the dependency of the electrical conductivity on both the clay content of the host material and the mineralization of the water, electromagnetic systems are suitable for providing information about the aquifer structures and water quality, respectively. More helicopter than fixed‐wing systems are used in airborne groundwater surveys. Helicopter‐borne frequency‐domain electromagnetic (HEM) systems use a towed rigid‐boom. Helicopter‐borne time‐domain (HTEM) systems, which use a large transmitter loop and a small receiver within or above the transmitter, are generally designed for mineral exploration purposes but recent developments have made some of these systems usable for groundwater purposes as well. The quantity measured, the secondary magnetic field, depends on the subsurface conductivity distribution. Due to the skin‐effect, the penetration depths of the AEM fields depend on the system characteristics used: high‐frequency data/early‐time channels describe the shallower parts of the conducting subsurface and the low‐frequency data/late‐time channels the deeper parts. Typical investigation depths range from some ten metres (conductive grounds) to several hundred metres (resistive grounds), where the HEM systems are appropriate for shallow to medium deep (about 1–100 m) and the HTEM systems for medium deep to deep (about 10–400 m) investigations. Generally, the secondary field values are inverted into resistivities and depths using homogeneous or layered half‐space models. As the footprint of AEM systems is rather small, one‐dimensional interpretation of AEM data is sufficient in most cases and single‐site inversion procedures are widely used. Laterally constrained inversion of AEM data often improves the stability of the inversion models, particularly for noisy data. Higher dimensional inversion is still not possible for standard‐size surveys. Based on typical field examples the advantages as well as the limitations of AEM surveys compared to long‐established ground‐based geophysical methods used in groundwater surveys are discussed. In a case history from a German island an airborne frequency‐domain system is used to successfully locate freshwater lenses on top of saltwater. An example from Denmark shows how a time‐domain system is used to locate large‐scale buried structures forming ideal groundwater aquifers.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.3997/1873-0604.2009043

Cites

10 of 10 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 10 references

Cited by

See all 301

Metadata

Authors
Siemon, B., Christiansen, A. V., & Auken, E.
Venue
Near Surface Geophysics
Publisher
Wiley
Published
2009-07
Volume
7
Issue
5-6
Pages
629-646
ISSN
  • 1569-4445 (ISSN-L)
  • 1873-0604
OpenAlex
W2083527554
Cited by
301
References
10
FWCI
8.17
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: A review of helicopter‐borne electromagnetic methods for groundwater exploration. https://app.cochat.ai/papers/10.3997/1873-0604.2009043
The paper
Siemon, B., Christiansen, A. V., & Auken, E. (2009). A review of helicopter‐borne electromagnetic methods for groundwater exploration. Near Surface Geophysics. https://doi.org/10.3997/1873-0604.2009043

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.