Multi-Objective Optimization of Metal Removal Rate, Dimensional and Profile Accuracy during Drilling of ASTM A516 (Grade70) Steel
Open accessThe DOI matches its Crossref record; 14 of the 14 references it cites were found in a registry or an index.
Abstract
The aim of this research work is identification of optimum drilling parameters to increase material removal rate, dimensional and profile accuracy during drilling. ASTM A516 (Grade70) which is a boiler quality plate of 12 mm thickness was considered as the specimen for conducting the experiments. The experiment was done based on full factorial design using 18 experiments generated using Minitab Software. Two levels for tool material and three levels for feed-speed combination and cutting environment were considered. Two runs were carried out for each trial. The metal removal rate was calculated for each hole drilled. The mean result of the two runs of a trial was taken as the result of the trial. The drilled holes were then tested for their dimensional, profile accuracies. With these results in hand the Artificial Neural Network software was trained to predict the optimized input parameters for drilling a hole of required dimensional and profile accuracies and with required metal removal rate.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Krishnaraj, V., Prabukarthi, A., Ramanathan, A., Elanghovan, N., Senthil Kumar, M., Zitoune, R., & Davim, J. P. (2012) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2012.01.007 · Cited by 400 · cited 1×
“It is also concluded that to achieve better surface finish and optimal MRR in drilling, high cutting speed, low feed rate and low point angle should be implemented while machining[11, 12].”
BackgroundOptimization of process parameters in drilling of GFRP composite using Taguchi method
Vankanti, V. K., & Ganta, V. (2014) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2013.10.007 · Cited by 192 · cited 1×
“Speed and chiesel angle width have the greatest impact on hole circularity error [13].”
BackgroundQuiza, R., Reis, P., & Davim, J. P. (2006) · Composites Science and Technology · doi:10.1016/j.compscitech.2006.05.003 · Cited by 152
Kıvak, T., Samtaş, G., & Çiçek, A. (2012) · Measurement · doi:10.1016/j.measurement.2012.02.022 · Cited by 116 · cited 1×
“From the investigations, it was observed that the cutting tool was mainly the significant parameter affecting surface finish under dry cutting conditions [14].”
BackgroundGrey-fuzzy algorithm to optimise machining parameters in drilling of hybrid metal matrix composites
Rajmohan, T., Palanikumar, K., & Prakash, S. (2013) · Composites Part B Engineering · doi:10.1016/j.compositesb.2013.02.030 · Cited by 109 · cited 1×
“In determining the ideal setting, the grey fuzzy logic technique is more successful and can substantially make simpler the procedure for optimization of numerous features that are intricate [10].”
MethodNayak, S. K., Patro, J. K., Dewangan, S., & Gangopadhyay, S. (2014) · Procedia Materials Science · doi:10.1016/j.mspro.2014.07.086 · Cited by 88 · cited 1×
“78% improvement in GRG was observed by Shreemoy Kumar Nayak using Gray Relations analysis [15].”
MethodOptimization of Deep Drilling Process Parameters of AISI 321 Steel Using Taguchi Method
Siddiquee, A. N., Khan, Z. A., Goel, P., et al. (2014) · Procedia Materials Science · doi:10.1016/j.mspro.2014.07.195 · Cited by 62 · cited 1×
“Surface roughness in deep hole drilling was primarily affected by cutting parameters such as speed, feed, and cutting fluid, in addition to hole depth [5].”
BackgroundImproving drilling performance through optimizing controllable drilling parameters
Bani‐Mustafa, A., Abbas, A. K., Alsaba, M., et al. (2021) · Journal of Petroleum Exploration and Production Technology · doi:10.1007/s13202-021-01116-2 · Cited by 50
Kannan, T. D. B., Kannan, G. R., Kumar, B. S., et al. (2014) · Procedia Materials Science · doi:10.1016/j.mspro.2014.07.433 · Cited by 37
Multi Objective Optimization of Drilling Parameters Using Genetic Algorithm
Saravanan, M., Ramalingam, D., Manikandan, G., et al. (2012) · Procedia Engineering · doi:10.1016/j.proeng.2012.06.027 · Cited by 30
Research works printed but not linked: 3
- PV Rajesh, AR Subass, V Tamilpriyan, S Vasanth, Optimization of process parameters and machinability in milling analysis aluminium–zirconia composites, International Journal of Advanced Research Methodology in Engineering & Technology, 2 (2) (2018).
- R Rekha, N Baskar, NN-GA based modelling and optimization of cylindrical grinding process, 5th International & 26th All India Manufacturing Technology, Design and Research Conference (AIMTDR 2014) December 12th–14th, 2014, IIT Guwahati, Assam, India 260, 1-5.
- R Rekha, N Baskar, MRA Padmanaban, A Palanisamy Optimization of cylindrical grinding process parameters using meta-heuristic algorithms, Indian Journal of Engineering and Materials Sciences (IJEMS) 27 (2), 389-395.
Metadata
- Authors
- Vinoth Kumar, S., Rekha, R., Gokula Rajan, M., Adhinathan, C., Jessinth Blesso, E., & Karthik, B.
- Affiliations
- Saranathan College of Engineering/ Anna University
- Anna University, Chennai (IN)
- Corresponding author
- Rekha, R.
- ORCID
- Karthik, B.
- Venue
- Key Engineering Materials
- Publisher
- Trans Tech Publications, Ltd.
- Published
- 2022-10-17
- Volume
- 933
- Pages
- 97-106
- ISSN
- 1013-9826 (ISSN-L)
- 1662-9795
- OpenAlex
- W4306410042
- Cited by
- 0
- References
- 14
- FWCI
- 0.00
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Licence
- cc-by
- www.scientific.net/PolicyAndEthics/PublishingPolicies (vor)
- www.scientific.net/license/TDM_Licenser.pdf (tdm)
- Locations
- Key engineering materials (publishedVersion, cc-by)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Advanced machining processes and optimization
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Advanced Machining and Optimization Techniques
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Engineering Technology and Methodologies
- Keywords
- drilling, metal removal rate, dimensional accuracy, multi-objective optimization, drilling parameters, feed rate, cutting environment, tool materials, artificial neural networks, parameter prediction
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.