CoChat

Alkali Induced Corrosion of 304-Type Austenitic Stainless Steel at 600°C; Comparison between KCl, K2CO3 and K2SO4

Pettersson, J., Svensson, Jan Erik, Johansson, Lars Gunnar · 2008 · Materials Science Forum
Cited by 42

The DOI matches its Crossref record.

Abstract

The influence of KCl, K2CO3 and K2SO4 on the initial stages of corrosion of 304-type (Fe18Cr10Ni) stainless steel was investigated at 600°C in 5% O2 + 40% H2O. Small amounts of salt (1.35 .mol K+/cm2) were added before exposure. The exposures were carried out in a thermobalance. Exposure time was 24 hours. Reference exposures were carried out in 5% O2 and in 5% O2 + 40% H2O. The oxidized samples were analyzed by SEM/EDX, XRD and IC. KCl and K2CO3 are very corrosive towards 304L, producing thick non-protective scales. Corrosion is initiated by the reaction of the potassium salts with the protective, chromium-rich oxide forming K2CrO4. This depletes the oxide in chromia and converts it into iron-rich non-protective oxide. In contrast, K2SO4 does not accelerate corrosion significantly.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.4028/www.scientific.net/msf.595-598.367

Cites

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cited by

See all 42

Metadata

Authors
Pettersson, J., Svensson, J. E., & Johansson, L. G.
Venue
Materials Science Forum
Published
2008-09-09
Volume
595-598
Pages
367-375
ISSN
  • 0255-5476 (ISSN-L)
  • 1662-9752
OpenAlex
W2048666858
Cited by
42
References
0
FWCI
4.79
Type
journal article
Language
en
Open access
closed
Licence

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Alkali Induced Corrosion of 304-Type Austenitic Stainless Steel at 600°C; Comparison between KCl, K2CO3 and K2SO4. https://app.cochat.ai/papers/10.4028/www.scientific.net/msf.595-598.367
The paper
Pettersson, J., Svensson, J. E., & Johansson, L. G. (2008). Alkali Induced Corrosion of 304-Type Austenitic Stainless Steel at 600°C; Comparison between KCl, K2CO3 and K2SO4. Materials Science Forum. https://doi.org/10.4028/www.scientific.net/msf.595-598.367

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.