Degradation and Viscoelastic Properties of PLA-PCL, PGA-PCL, PDO and PGA Fibres
Open accessThe DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
Aliphatic polyesters, such as polylactic acid (PLA), polyglycolic acid (PGA), polycaprolactone (PCL), polydioxone (PDO) and others, have been commonly used in biodegradable products. Hydrolytic and/or enzymatic chain cleavage of these materials leads to α-hydroxyacids, which, in most cases, are ultimately assimilated in human body or in a composting environment. However, each of these has some shortcomings, in terms of mechanical properties and degradation time, which restrict its applications. The combination of these materials, by copolymerization or blending, enables a range of mechanical properties and degradation rates. These are extremely promising approaches which can improve or tune the original properties of the polymers. A composite solution of several materials with different degradation rates also enables tuning the rate of degradation of a device and the mechanical properties. After immersion of an aliphatic polyester device, diffusion occurs very rapidly compared to hydrolysis. Therefore, it is usually considered that hydrolysis of ester bonds starts homogeneously and has traditionally been modelled according to a first order kinetics. In this experimental study, fibres of PLA-PCL, PGA-PCL, PDO and PGA, with two different dimensions, were characterized in terms of their degradation rate under three different environments (water, NaCl and PBS) at constant temperature (37°C). Weights and mechanical properties were measured after six different degradation stages. Stages durations were different depending on materials, according to the predicted degradation times. As other thermoplastics, they are viscoelastic materials. In this experimental study mechanical properties of fibres were compared at different strain rates.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Biodegradable polymers as biomaterials
Nair, L. S., & Laurencin, C. T. (2007) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2007.05.017 · Cited by 4,416 · cited 3×
“Comparing to tensile results of Fu et. al [9] of PLGA with a degradation rate of strength, k, of around 0.9 is slightly higher than that of PGA alone.”
BackgroundInfluentialAn Overview of Polylactides as Packaging Materials
Auras, R., Harte, B., & Selke, S. (2004) · Macromolecular Bioscience · doi:10.1002/mabi.200400043 · Cited by 3,454
Properties of lactic acid based polymers and their correlation with composition
Södergård, A., & Stolt, M. (2002) · Progress in Polymer Science · doi:10.1016/s0079-6700(02)00012-6 · Cited by 1,461 · cited 1×
“PCL is also hydrophilic with a low degradation rate, much more ductile than PLA [3].”
Background
Cited by
Samantaray, P. K., Little, A., Haddleton, D. M., McNally, T., Tan, B., Sun, Z., Huang, W., Ji, Y., & Wan, C. (2020) · Green Chemistry · doi:10.1039/d0gc01394c · Cited by 450
A review on the thermomechanical properties and biodegradation behaviour of polyesters
Larrañaga, A., & Lizundia, E. (2019) · European Polymer Journal · doi:10.1016/j.eurpolymj.2019.109296 · Cited by 257
Kalita, N. K., Bhasney, S. M., Mudenur, C., Kalamdhad, A., & Katiyar, V. (2020) · Chemosphere · doi:10.1016/j.chemosphere.2020.125875 · Cited by 101
Gritsch, L., Conoscenti, G., La Carrubba, V., Nooeaid, P., & Boccaccini, A. R. (2019) · Materials Science and Engineering: C · doi:10.1016/j.msec.2018.09.038 · Cited by 51
“The possibility of combining it to form copolymers was also studied: several works presented copolymers: PLA-polyethylene glycol [53,65], PLA-polyglycolic acid [52], PLApolycaprolactone [66,67] and more.”
BackgroundDevelopment of 3D Printed Biodegradable Mesh with Antimicrobial Properties for Pelvic Organ Prolapse
Ren, J., Murray, R., Wong, C. S., Qin, J., Chen, M., Totsika, M., Riddell, A. D., Warwick, A., Rukin, N., & Woodruff, M. A. (2022) · Polymers · doi:10.3390/polym14040763 · Cited by 42
“Other PCL composites, such as PCL/PLA, showed a weight loss of less than 5% in PBS at 37 ◦C after 30 days, whereas PCL/PGA exhibited a loss of 55%, which would be too fast for a POP application [36].”
Method
Metadata
- Authors
- Vieira, A. C., Vieira, J. C., Guedes, R. M., & Marques, A. T.
- Venue
- Materials Science Forum
- Publisher
- Trans Tech Publications, Ltd.
- Published
- 2010-01-12
- Volume
- 636-637
- Pages
- 825-832
- ISSN
- 0255-5476 (ISSN-L)
- 1662-9752
- OpenAlex
- W2086442941
- Cited by
- 66
- References
- 3
- FWCI
- 0.24
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Degradation and Viscoelastic Properties of PLA-PCL, PGA-PCL, PDO and PGA Fibres. https://app.cochat.ai/papers/10.4028/www.scientific.net/msf.636-637.825
- The paper
- Vieira, A. C., Vieira, J. C., Guedes, R. M., & Marques, A. T. (2010). Degradation and Viscoelastic Properties of PLA-PCL, PGA-PCL, PDO and PGA Fibres. Materials Science Forum. https://doi.org/10.4028/www.scientific.net/msf.636-637.825
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.