The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Simulation Study of a Series Hydraulic Hybrid Propulsion System for a Light Truck
Abstract
The global energy situation, the dependence of the transportation sector on fossil fuels, and a need for rapid response to the global warming challenge, provide a strong impetus for development of fuel efficient vehicle propulsion. The task is particularly challenging in the case of trucks due to severe weight/size constraints. Hybridization is the only approach offering significant breakthroughs in near and mid-term. In particular, the series configuration decouples the engine from the wheels and allows full flexibility in controlling the engine operation, while the hydraulic energy conversion and storage provides exceptional power density and efficiency. The challenge stems from a relatively low energy density of the hydraulic accumulator, and this provides part of the motivation for a simulation-based approach to development of the system power management. The vehicle is based on the HMMWV platform, a 4×4 off-road truck weighing 5112 kg. The development of the component models and system integration in SUMULINK are discussed before addressing the configuration (single propulsion motor or two) and component sizing. The power management is based on a thermostatic state-of-charge (SOC) approach, but the optimum threshold power and SOC for accumulator charging are determined based on detailed system analysis, rather than the conventional wisdom of operating the engine at the “sweet spot”. The results indicate significant advantages of reduced threshold power. Relatively low target SOC led to improved ability to capture the braking energy. Engine shut-downs are considered too. The fuel economy predictions for the optimized hybrid system indicate improvements of 68% (with engine shut-downs) under urban driving conditions, and tangible benefits in highway driving.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Optimal Power Management for a Hydraulic Hybrid Delivery Truck
Wu, B., Lin, C.-C., Filipi, Z., Peng, H., & Assanis, D. (2004) · Vehicle System Dynamics · doi:10.1080/00423110412331291562 · Cited by 208
Self-citationModeling of a Hydraulic Energy Regeneration System: Part I—Analytical Treatment
Pourmovahed, A., Beachley, N. H., & Fronczak, F. J. (1992) · Journal of Dynamic Systems Measurement and Control · doi:10.1115/1.2896497 · Cited by 111
Miller, J. M., & Everett, M. (2005) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2005.1452980 · Cited by 61
Cited by
Nordelöf, A., Messagie, M., Tillman, A.-M., Ljunggren Söderman, M., & Van Mierlo, J. (2014) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-014-0788-0 · Cited by 543
Co-electrolysis of CO2 and H2O in solid oxide cells: Performance and durability
Graves, C., Ebbesen, S. D., & Mogensen, M. (2011) · Solid State Ionics · doi:10.1016/j.ssi.2010.06.014 · Cited by 449
Gosling, S. N., Lowe, J. A., McGregor, G. R., Pelling, M., & Malamud, B. D. (2009) · Climatic Change · doi:10.1007/s10584-008-9441-x · Cited by 429
Structuring adsorbents and catalysts by processing of porous powders
Akhtar, F., Andersson, L., Ogunwumi, S., Hedin, N., & Bergström, L. (2014) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2014.01.008 · Cited by 363
Ignition delay, combustion and emission characteristics of diesel engine fueled with biodiesel
Shahabuddin, M., Liaquat, A. M., Masjuki, H. H., Kalam, M. A., & Mofijur, M. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.01.019 · Cited by 325
Metadata
- Authors
- Kim, Y. J., & Filipi, Z.
- Venue
- SAE Technical Paper Series
- Publisher
- SAE International
- Published
- 2007-10-30
- Volume
- 1
- ISSN
- 0148-7191 (ISSN-L)
- 2688-3627
- OpenAlex
- W2208990229
- Cited by
- 646
- References
- 3
- FWCI
- 56.68
- Type
- conference paper
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.