The DOI matches its Crossref record.
Removal of cadmium(II) from aqueous solutions by steam-activated sulphurised carbon prepared from sugar-cane bagasse pith: kinetics and equilibrium studies
Open accessAbstract
Removal of cadmium(II) from aqueous solutions was studied using steam activated sulphurised carbon (SA-S-C) prepared from bagasse pith (a sugar-cane industry waste). Batch adsorption experiments were performed as a function of solute concentration, contact time, adsorbent dose, pH, temperature and ionic strength. The maximum removal took place in the pH range of 5.0 to 9.0. The maximum adsorption of 98.8 % (24.70 mg/g) took place by SA-S-C with 8.9 % sulphur content at pH 6.0 from an initial Cd(II) concentration of 50 mg/dm3. The sorption process follows pseudo-second-order kinetics. Kinetic parameters as a function of initial concentration and temperature were determined to predict the adsorption behaviour of Cd(II) onto SA-S-C. Decrease in ionic strength of the solution was found to improve the adsorption capacity of the adsorbent. The equilibrium data could be best fitted by the Langmuir adsorption isotherm equation over the entire concentration range (50 to 1 000 mg/dm3). The effectiveness of the SA-S-C for Cd(II) removal was examined and compared with other adsorbents reported in the literature. At solution pH of 6.0, the maximum adsorption capacity of SA-S-C calculated by the Langmuir isotherm is 149.93 mg/g at 30°C. Acid regeneration was tried for several cycles with a view to recover the sorbed metal ions and also to restore the sorbent to its original state. Keywords: Adsorption dynamics , Langmuir equation, Cd(II) removal, Sulphurised carbon, Desorption (WaterSA: 2003 29(2): 147-156)
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Review of second-order models for adsorption systems
HO, Y. (2006) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2005.12.043 · Cited by 4,120
SUD, D., MAHAJAN, G., & KAUR, M. (2008) · Bioresource Technology · doi:10.1016/j.biortech.2007.11.064 · Cited by 1,655
AL-Othman, Z. A., Ali, R., & Naushad, M. (2012) · Chemical Engineering Journal · doi:10.1016/j.cej.2012.01.048 · Cited by 748
Comparisons of low-cost adsorbents for treating wastewaters laden with heavy metals
Kurniawan, T. A., Chan, G. Y. S., Lo, W.-H., & Babel, S. (2006) · Science of The Total Environment · doi:10.1016/j.scitotenv.2005.10.001 · Cited by 743
MADHAVARAO, M., RAMESH, A., PURNACHANDRARAO, G., & SESHAIAH, K. (2006) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2005.08.018 · Cited by 473
Removal of lead from aqueous solution using low cost abundantly available adsorbents
Abdel-Ghani, N. T., Hefny, M., & El-Chaghaby, G. A. F. (2007) · International Journal of Environmental Science & Technology · doi:10.1007/bf03325963 · Cited by 316
Experimental study of the removal of copper from aqueous solutions by adsorption using sawdust
Larous, S., Meniai, A.-H., & Lehocine, M. B. (2005) · Desalination · doi:10.1016/j.desal.2005.03.090 · Cited by 309
Ajala, E. O., Ighalo, J. O., Ajala, M. A., Adeniyi, A. G., & Ayanshola, A. M. (2021) · Bioresources and Bioprocessing · doi:10.1186/s40643-021-00440-z · Cited by 279
A review on economically adsorbents on heavy metals removal in water and wastewater
Lim, A. P., & Aris, A. Z. (2014) · Reviews in Environmental Science and Bio/Technology · doi:10.1007/s11157-013-9330-2 · Cited by 263
Regeneration of magnetic biochar derived from eucalyptus leaf residue for lead(II) removal
Wang, S.-Y., Tang, Y.-K., Chen, C., Wu, J.-T., Huang, Z., Mo, Y.-Y., Zhang, K.-X., & Chen, J.-B. (2015) · Bioresource Technology · doi:10.1016/j.biortech.2015.03.139 · Cited by 117
Amin, M. T., Alazba, A. A., & Shafiq, M. (2018) · Arabian Journal for Science and Engineering · doi:10.1007/s13369-017-2934-z · Cited by 114
Metadata
- Authors
- Krishnan, K. A., & Anirudhan, T. S.
- Venue
- Water SA
- Publisher
- Academy of Science of South Africa
- Published
- 2003-02-01
- Volume
- 29
- Issue
- 2
- ISSN
- 0378-4738 (ISSN-L)
- OpenAlex
- W2111426969
- Cited by
- 242
- References
- 0
- FWCI
- 13.39
- Type
- journal article
- Language
- en
- Open access
- diamond
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.