Precise δ13C analysis of dissolved inorganic carbon in natural waters using automated headspace sampling and continuous‐flow mass spectrometry.
Open accessThe DOI matches its Crossref record.
Abstract
A new method is presented for automated measurement of the δ 13 C of the dissolved inorganic carbon in natural waters, using a Finnigan GasBench‐II headspace sampler online with a Finnigan DELTAplusXL gas‐source isotope‐ratio mass spectrometer. This technique requires a small volume (30–500 mL), analyses are rapid (~80 samples/d), and little or no manual preparation is necessary. The flexibility offered by using sample loops of various sizes permits analyses of aliquots containing 2 to 50 µg C. Based on multiple replicate measurements over a 7‐week period, the overall precision of this technique is conservatively estimated to be better than ± 0.15‰ (1 sample standard deviation), which is similar to the precision of methods in current use. This precision can be improved upon (averaging ± 0.04‰, but generally better than ± 0.07‰) by chilling the sample during equilibration at a controlled temperature of 12.0 ± 0.5°C. Standardization is provided by tank CO 2 (referenced to an array of international standards) and analyses are monitored against a stock solution of reagent NaHCO 3, which remains isotopically stable in powder form. NaHCO 3 can be analyzed with traditional acid‐digestion methods using dual‐inlet mass spectrometry, as well as in dissolved form on the GasBench‐II. Standard NaHCO 3 stock solutions made to approximate dissolved inorganic carbon concentrations in water samples are isotopically stable over a period of a several weeks.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Riedinger, N., Formolo, M. J., Lyons, T. W., Henkel, S., Beck, A., & Kasten, S. (2014) · Geobiology · doi:10.1111/gbi.12077 · Cited by 231
“The stable carbon isotope composition of dissolved inorganic carbon (DIC) was determined on a Gasbench II (Thermo Scientific, Bremen, Germany) coupled to a DELTA V plus IRMS (Thermo Scientific), according to the method of Torres et al. (2005).”
MethodInorganic carbon physiology underpins macroalgal responses to elevated CO2
Cornwall, C. E., Revill, A. T., Hall-Spencer, J. M., Milazzo, M., Raven, J. A., & Hurd, C. L. (2017) · Scientific Reports · doi:10.1038/srep46297 · Cited by 163
Trembath-Reichert, E., Morono, Y., Ijiri, A., Hoshino, T., Dawson, K. S., Inagaki, F., & Orphan, V. J. (2017) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1707525114 · Cited by 112
Application of multi-isotope data (O, D, C and S) to quantify redox processes in urban groundwater
Jurado, A., Vàzquez-Suñé, E., Soler, A., Tubau, I., Carrera, J., Pujades, E., & Anson, I. (2013) · Applied Geochemistry · doi:10.1016/j.apgeochem.2013.02.018 · Cited by 49
Metadata
- Authors
- Torres, M. E., Mix, A. C., & Rugh, W. D.
- Venue
- Limnology and Oceanography: Methods
- Publisher
- Wiley
- Published
- 2005-08
- Volume
- 3
- Issue
- 8
- Pages
- 349-360
- ISSN
- 1541-5856 (ISSN-L)
- OpenAlex
- W1998218018
- Cited by
- 142
- References
- 0
- FWCI
- 2.15
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.