The DOI matches its DataCite record; the references it cites are not checked yet.
Toolpath Overhang Optimization for the Large-Format 3D Printing of Bespoke Shapes
Abstract
This paper presents a closed curve trimming algorithm for overhang optimization in large-format support-free 3D printing of bespoke manifold shapes. Large-format 3D printing enables efficient fabrication of complex, bespoke shapes. Because of the material properties and surface quality requirements, such shapes are typically printed without support structures and have to be designed as support-free. Most current methods of overhang optimization are limited to certain types of geometry and do not apply to bespoke shapes. Our method directly optimizes sliced toolpath curves with minimal geometric modification. Given an overhang limit, it ensures that all resulting toolpath curves are strictly within the overhang limit while preserving their orientation and preventing intersections. The algorithm is based on curve offsetting and trimming, and is applicable to closed toolpath curves that represent the boundaries of a solid volume.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Metadata
- Authors
- Zhi, Y., & Akbarzadeh, M.
- Venue
- arXiv
- Publisher
- arXiv
- Published
- 2026
- arXiv
- 2611.00371
- Type
- Preprint
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Toolpath Overhang Optimization for the Large-Format 3D Printing of Bespoke Shapes. https://app.cochat.ai/papers/10.48550/arxiv.2611.00371
- The paper
- Zhi, Y., & Akbarzadeh, M. (2026). Toolpath Overhang Optimization for the Large-Format 3D Printing of Bespoke Shapes. arXiv. https://doi.org/10.48550/arxiv.2611.00371
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.