The DOI matches its Crossref record.
Kinetics, Microstructures and Mechanism of Internal Oxidation - Its Effect and Prevention in High Temperature Alloy Oxidation
Abstract
A review and evaluation of the role of internal oxidation in the oxidation of alloys is presented and five alloy types represented by Ag-In, Cu-Be, Ni-Cr, Nb-Zr and Cu-Zn-Al are considered in detail. Internal oxidation is a diffusion-controlled process for which the kinetics may be predicted from solutions of the diffusion equation. Except for oxidations involving the formation of extremely stable solute oxide precipitates or oxidations at temperatures allowing only minimal solute mobility, the experimentally measured kinetics are in agreement with the calculated rates. The radius of a spherical internal oxide precipitate is expected to vary directly with the depth at which the precipitate is formed and inversely with the oxygen solubility at the external surface. Upon exceeding a critical solute content in a given binary alloy system, the occurrence of internal oxidation of the solute is replaced by the formation of an external scale of the solute metal oxide. A reduction in the oxygen content at the surface or the introduction of deformation into the surface of the alloy can reduce the solute content required for the transition from internal to external oxidation. In most cases, the prevention of internal oxidation by the formation of a compact surface layer of the solute oxide will result in a reduction of the oxidation rate of an alloy. When internal oxidation of a solute occurs in combination with external scale formation, the morphology of the precipitates in the microstructure of the oxidized alloy is determined both by the precipitation conditions and the mode of external scale formation. Internal oxide precipitates can affect both the mechanism and kinetics of external scale formation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Stress effects in high temperature oxidation of metals
Evans, H. E. (1995) · International Materials Reviews · doi:10.1179/095066095790151124 · Cited by 592
Principals and strategies for constructing a highly reversible zinc metal anode in aqueous batteries
Han, C., Li, W., Liu, H. K., Dou, S., & Wang, J. (2020) · Nano Energy · doi:10.1016/j.nanoen.2020.104880 · Cited by 363
Oxidation mechanism of an Fe–9Cr–1Mo steel by liquid Pb–Bi eutectic alloy at 470°C (Part II)
Martinelli, L., Balbaud-Célérier, F., Terlain, A., Bosonnet, S., Picard, G., & Santarini, G. (2008) · Corrosion Science · doi:10.1016/j.corsci.2008.06.051 · Cited by 275
The Effect of Silicon Addition on the High Temperature Oxidation of a Fe-Cr Alloy
Mikkelsen, L., Linderoth, S., & Bilde-Sørensen, J. B. (2004) · Materials Science Forum · doi:10.4028/www.scientific.net/msf.461-464.117 · Cited by 59
Diffusional growth of multiphase scales and subscales on binary alloys: A review
Smeltzer, W. W. (1987) · Materials Science and Engineering · doi:10.1016/0025-5416(87)90358-2 · Cited by 3
Metadata
- Authors
- Rapp, R. A.
- Venue
- Corrosion
- Published
- 1965-12-01
- Volume
- 21
- Issue
- 12
- Pages
- 382-401
- ISSN
- 0010-9312 (ISSN-L)
- 1938-159X
- OpenAlex
- W1979078716
- Cited by
- 549
- References
- 0
- FWCI
- 10.61
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Kinetics, Microstructures and Mechanism of Internal Oxidation - Its Effect and Prevention in High Temperature Alloy Oxidation. https://app.cochat.ai/papers/10.5006/0010-9312-21.12.382
- The paper
- Rapp, R. A. (1965). Kinetics, Microstructures and Mechanism of Internal Oxidation - Its Effect and Prevention in High Temperature Alloy Oxidation. Corrosion. https://doi.org/10.5006/0010-9312-21.12.382
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.