Corrosion Kinetics of Low- and High-Alloy Steels in Chlorine-Containing Gas Atmospheres
The DOI matches its Crossref record.
Abstract
The effect of chlorine on the high-temperature corrosion of high-alloy steels Monit†, Al29-4C, Sanicro† 28 (UNS N08028), Sanicro† 31, Incoloy† 800H (UNS N08810) and AISI 310 (UNS 531000), and of low-alloy steels 10CrMo9.10, Mod.9Cr1Mo, X20CrMoV12.1, and 15Mo3 in atmospheres with low oxygen and high sulfur partial pressures were investigated. The addition of 500 ppm HCl (pCl2 = 2.5 x 10−20 atm) to the oxidizing/sulfidizing atmosphere at 450°C increases the corrosion rate and the void fraction in the sulfide scale and decreases the adherence causing spallation of the scale. Depending on the experimental procedure, locally condensed chloride compounds could be formed. For AISI 310, additional experiments on the effect of temperature and pCl2 on the corrosion rate were performed. With increasing temperature or pCl2, the corrosion rate increased. Only the high-alloy steels showed promising results. Some models are discussed to explain the enhanced corrosion rate due to the presence of chlorine.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
The implications of chlorine-associated corrosion on the operation of biomass-fired boilers
Nielsen, H. P., Frandsen, F. J., Dam-Johansen, K., & Baxter, L. L. (2000) · Progress in Energy and Combustion Science · doi:10.1016/s0360-1285(00)00003-4 · Cited by 785
Deposition and high temperature corrosion in a 10 MW straw fired boiler
Michelsen, H. P., Frandsen, F., Dam-Johansen, K., & Larsen, O. H. (1998) · Fuel Processing Technology · doi:10.1016/s0378-3820(97)00062-3 · Cited by 258
Initial Stages of the HCl-Induced High-Temperature Corrosion of Alloy 310
Folkeson, N., Johansson, L.-G., & Svensson, J.-E. (2007) · Journal of The Electrochemical Society · doi:10.1149/1.2754174 · Cited by 66
Olivas-Ogaz, M. A., Eklund, J., Svensson, J.-E., Liske, J., & Jonsson, T. (2017) · Oxidation of Metals · doi:10.1007/s11085-017-9763-z · Cited by 13
Metadata
- Authors
- Haanappel, V. A. C., Haanappel, N. W. J., Fransen, T., van Corbach, H. D., & Gellings, P. J.
- Venue
- Corrosion
- Published
- 1992-10-01
- Volume
- 48
- Issue
- 10
- Pages
- 812-821
- ISSN
- 0010-9312 (ISSN-L)
- 1938-159X
- OpenAlex
- W2001983858
- Cited by
- 30
- References
- 0
- FWCI
- 1.37
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Corrosion Kinetics of Low- and High-Alloy Steels in Chlorine-Containing Gas Atmospheres. https://app.cochat.ai/papers/10.5006/1.3315879
- The paper
- Haanappel, V. A. C., Haanappel, N. W. J., Fransen, T., van Corbach, H. D., & Gellings, P. J. (1992). Corrosion Kinetics of Low- and High-Alloy Steels in Chlorine-Containing Gas Atmospheres. Corrosion. https://doi.org/10.5006/1.3315879
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.