Mixed Oxidation of Iron–Chromium Alloys in Gases Containing Oxygen and Chlorine at 900 to 1200°K
The DOI matches its Crossref record.
Abstract
The mixed oxidation of three binary Fe-Cr alloys containing 1, 5, and 20 wt% Cr in Ar-50%O2-1%Cl2 and in Ar-50%O2-0.25%Cl2 at temperatures between 900 and 1200 K has been investigated using thermogravimetric analysis and examination of the corrosion products by scanning electron microscopy. At 1000 K and above, the alloys experience accelerated corrosion associated with the formation of a porous two-layered oxide scale. Iron oxide is concentrated in the outer layer and chromium oxide in the inner layer. Iron chloride deposits are detected near the scale-metal interface at 1000 K, but not at higher temperatures. Although the 20% Cr alloy is much more resistant to oxidation than the other alloys in uncontaminated O2, the rates of corrosion of all three alloys are very similar in the chlorine-containing environments at 1000 K. A mechanism proposed for the accelerated oxidation in these environments is based on the formation, diffusion, and reoxidation of volatile iron chlorides.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
The implications of chlorine-associated corrosion on the operation of biomass-fired boilers
Nielsen, H. P., Frandsen, F. J., Dam-Johansen, K., & Baxter, L. L. (2000) · Progress in Energy and Combustion Science · doi:10.1016/s0360-1285(00)00003-4 · Cited by 785
Zahs, A., Spiegel, M., & Grabke, H. J. (2000) · Corrosion Science · doi:10.1016/s0010-938x(99)00142-0 · Cited by 365
Deposition and high temperature corrosion in a 10 MW straw fired boiler
Michelsen, H. P., Frandsen, F., Dam-Johansen, K., & Larsen, O. H. (1998) · Fuel Processing Technology · doi:10.1016/s0378-3820(97)00062-3 · Cited by 258
Role of chlorides in hot corrosion of a cast Fe–Cr–Ni alloy. Part I: Experimental studies
Mohanty, B. P., & Shores, D. A. (2004) · Corrosion Science · doi:10.1016/j.corsci.2004.04.013 · Cited by 148
Bai, M., Reddy, L., & Hussain, T. (2018) · Corrosion Science · doi:10.1016/j.corsci.2018.02.047 · Cited by 81
Metadata
- Authors
- Kim, A. S., & McNallan, M. J.
- Venue
- Corrosion
- Published
- 1990-09-01
- Volume
- 46
- Issue
- 9
- Pages
- 746-755
- ISSN
- 0010-9312 (ISSN-L)
- 1938-159X
- OpenAlex
- W1965957467
- Cited by
- 42
- References
- 0
- FWCI
- 5.56
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Mixed Oxidation of Iron–Chromium Alloys in Gases Containing Oxygen and Chlorine at 900 to 1200°K. https://app.cochat.ai/papers/10.5006/1.3585177
- The paper
- Kim, A. S., & McNallan, M. J. (1990). Mixed Oxidation of Iron–Chromium Alloys in Gases Containing Oxygen and Chlorine at 900 to 1200°K. Corrosion. https://doi.org/10.5006/1.3585177
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.