Formation of Condensed Chlorides During Mixed Oxidation–Chlorination of Iron at 1000 K
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
The mixed oxidation-chlorination of iron in gas mixtures of Ar, O2, and Cl2 at 1000 K has been investigated by thermogravimetric analysis and examination of the corrosion products by optical and scanning electron microscopy and X-ray diffraction analysis. Vapor phase transport of iron chlorides influences the rate of oxidation-chlorination when the concentration of chlorine in the gas mixture is low. When the concentration of chlorine in the gas mixture is high enough to support the formation of a liquid iron chloride deposit on the corroding surface, fluxing of the oxide scale can produce much faster corrosion than is observed in lower chlorine environments. An equation is proposed to predict the conditions under which this form of attack can occur. Because the vapor pressure of iron chloride increases rapidly with temperature, this form of corrosion can only occur in a narrow range of temperatures just above the melting point of FeCl2.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Low Temperature Hot Corrosion of Cobalt-Base Alloys: Part II. Reaction Mechanism
Luthra, K. L. (1982) · Metallurgical Transactions A · doi:10.1007/bf02647842 · Cited by 89
Cited by
The implications of chlorine-associated corrosion on the operation of biomass-fired boilers
Nielsen, H. P., Frandsen, F. J., Dam-Johansen, K., & Baxter, L. L. (2000) · Progress in Energy and Combustion Science · doi:10.1016/s0360-1285(00)00003-4 · Cited by 785
Deposition and high temperature corrosion in a 10 MW straw fired boiler
Michelsen, H. P., Frandsen, F., Dam-Johansen, K., & Larsen, O. H. (1998) · Fuel Processing Technology · doi:10.1016/s0378-3820(97)00062-3 · Cited by 258
KCl Induced Corrosion of a 304-type Austenitic Stainless Steel at 600°C; The Role of Potassium
Pettersson, J., Asteman, H., Svensson, J. E., & Johansson, L. G. (2005) · Oxidation of Metals · doi:10.1007/s11085-005-5704-3 · Cited by 182
Jonsson, T., Froitzheim, J., Pettersson, J., Svensson, J.-E., Johansson, L.-G., & Halvarsson, M. (2009) · Oxidation of Metals · doi:10.1007/s11085-009-9156-z · Cited by 76
Initial Stages of the HCl-Induced High-Temperature Corrosion of Alloy 310
Folkeson, N., Johansson, L.-G., & Svensson, J.-E. (2007) · Journal of The Electrochemical Society · doi:10.1149/1.2754174 · Cited by 66
Metadata
- Authors
- Lee, S. Y., & McNallan, M. J.
- Venue
- Corrosion
- Published
- 1991-11-01
- Volume
- 47
- Issue
- 11
- Pages
- 868-874
- ISSN
- 0010-9312 (ISSN-L)
- 1938-159X
- OpenAlex
- W1999838484
- Cited by
- 26
- References
- 1
- FWCI
- 2.72
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.