The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Recording and Analysis of AC Impedance Data for Corrosion Studies
Abstract
A brief review is given of the application of AC impedance measurements to electrochemical processes. Only very few applications for corrosion processes have been reported. The background and various methods of analysis of AC impedance data are discussed. The parameters which characterize the corrosion behavior can be determined from plots of the frequency dependence of the impedance in the complex plane which result in semicircles for very simple cases. These parameters can also be determined from straight line plots of the real part Z′ vs ωZ″ or Z″/ω, where Z″ is the imaginary part of the impedance and the frequency f is expressed as ω = 2πf. Additional methods of analysis include evaluation of the frequency dependence of the series resistance Rs and series capacitance Cs, the absolute value of the impedance |Z| and the phase angle δ. Experimental results obtained with a system for automatic recording and analysis of impedance data are given for a dummy cell which represents a corroding electrode.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Dispersion and Absorption in Dielectrics I. Alternating Current Characteristics
Cole, K. S., & Cole, R. H. (1941) · The Journal of Chemical Physics · doi:10.1063/1.1750906 · Cited by 10,152
Cited by
Electrochemical impedance spectroscopy (EIS) of corrosion processes on inhomogeneous surfaces
Jüttner, K. (1990) · Electrochimica Acta · doi:10.1016/0013-4686(90)80004-8 · Cited by 817
King, A. D., Birbilis, N., & Scully, J. R. (2014) · Electrochimica Acta · doi:10.1016/j.electacta.2013.12.124 · Cited by 640
Özcan, M., Dehri, İ., & Erbil, M. (2004) · Applied Surface Science · doi:10.1016/j.apsusc.2004.04.017 · Cited by 498
A review of AC impedance modeling and validation in SOFC diagnosis
Huang, Q.-A., Hui, R., Wang, B., & Zhang, J. (2007) · Electrochimica Acta · doi:10.1016/j.electacta.2007.05.071 · Cited by 403
Okafor, P. C., & Zheng, Y. (2009) · Corrosion Science · doi:10.1016/j.corsci.2009.01.027 · Cited by 356
Metadata
- Authors
- Mansfeld, F.
- Venue
- Corrosion
- Published
- 1981-05-01
- Volume
- 37
- Issue
- 5
- Pages
- 301-307
- ISSN
- 0010-9312 (ISSN-L)
- 1938-159X
- OpenAlex
- W4239954316
- Cited by
- 583
- References
- 1
- FWCI
- 11.49
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Recording and Analysis of AC Impedance Data for Corrosion Studies. https://app.cochat.ai/papers/10.5006/1.3621688
- The paper
- Mansfeld, F. (1981). Recording and Analysis of AC Impedance Data for Corrosion Studies. Corrosion. https://doi.org/10.5006/1.3621688
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
