The DOI matches its Crossref record; 13 of the 13 references it cites were found in a registry or an index; 4 of the 8 sources its claims cite were checked for support.
Root mean square error (RMSE) or mean absolute error (MAE)? – Arguments against avoiding RMSE in the literature
Open accessPublished version of a preprint
Abstract
Abstract. Both the root mean square error (RMSE) and the mean absolute error (MAE) are regularly employed in model evaluation studies. Willmott and Matsuura (2005) have suggested that the RMSE is not a good indicator of average model performance and might be a misleading indicator of average error, and thus the MAE would be a better metric for that purpose. While some concerns over using RMSE raised by Willmott and Matsuura (2005) and Willmott et al. (2009) are valid, the proposed avoidance of RMSE in favor of MAE is not the solution. Citing the aforementioned papers, many researchers chose MAE over RMSE to present their model evaluation statistics when presenting or adding the RMSE measures could be more beneficial. In this technical note, we demonstrate that the RMSE is not ambiguous in its meaning, contrary to what was claimed by Willmott et al. (2009). The RMSE is more appropriate to represent model performance than the MAE when the error distribution is expected to be Gaussian. In addition, we show that the RMSE satisfies the triangle inequality requirement for a distance metric, whereas Willmott et al. (2009) indicated that the sums-of-squares-based statistics do not satisfy this rule. In the end, we discussed some circumstances where using the RMSE will be more beneficial. However, we do not contend that the RMSE is superior over the MAE. Instead, a combination of metrics, including but certainly not limited to RMSEs and MAEs, are often required to assess model performance.
Overview
AI snapshot
Written from the paper’s full text.
TL;DR
This technical note argues against the recommendation by Willmott and Matsuura (2005) and Willmott et al. (2009) to abandon RMSE in favor of MAE, showing that RMSE is not ambiguous in meaning and is more appropriate when errors are expected to be Gaussian. The authors also demonstrate that RMSE satisfies the triangle inequality required of a distance metric, contrary to the earlier claims, while concluding that a combination of metrics is often needed.
Key findings
- RMSE is not ambiguous in its meaning, contrary to Willmott et al. (2009); it is more appropriate than MAE when the error distribution is expected to be Gaussian, whereas MAE suits uniformly distributed errors.
- Using randomly generated zero-mean, unit-variance Gaussian pseudo-errors, RMSEs converge to the true standard deviation (SE = 1) once n ≥ 100, with standard deviation within 5% of truth; MAEs converge to 0.8, approximating the expectation of √(2/π). Neither metric is robust at n = 4 or n = 10.
- RMSE satisfies the triangle inequality required for a distance metric: the example in Willmott et al. (2009) (d(a,c)=4, d(a,b)=2, d(b,c)=3) actually represents the MSE, not the RMSE, and the L2-norm proof in Eqs. (5)–(7) shows RMSE does satisfy it.
- RMSE has practical advantages: it avoids absolute values (useful for gradients/sensitivities and data assimilation cost functions) and is generally better at discriminating among model results by weighting unfavorable conditions more heavily.
Methods
- Technical note / commentary design: no new observational dataset; the argument is analytical, using norm theory (L1- and L2-norms linked to MAE and RMSE) and a proof of the triangle inequality for the L2-norm.
- A Monte Carlo-style demonstration: five sets of pseudo-errors of size n = 4, 10, 100, 1000, 10 000, and 1000 000 drawn from a zero-mean, unit-variance Gaussian distribution with different random seeds, comparing RMSEs and MAEs (Table 1).
- Reference to prior empirical example: Chai et al. (2009) reported RMSE-to-MAE ratios of 1.63 to 2.29 for model NO2 column predictions versus SCIAMACHY satellite observations.
Limitations
- Stated by the authors: the analysis assumes unbiased errors and does not consider uncertainties from observation errors or the method used to compare model and observations; all statistics are less useful with limited sample sizes (e.g., n = 4 or 10), where presenting the errors themselves may be more appropriate; for non-normal distributions, additional moments (mean, variance, skewness, flatness) are needed; outliers several orders larger than other samples may justifiably be removed when sample numbers are limited, and systematic errors may need removal before computing RMSEs.
- Evident from the text: the demonstration relies on synthetic Gaussian pseudo-errors rather than real model–observation comparisons, so the convergence results are conditional on the Gaussian assumption; the authors explicitly do not claim RMSE is superior to MAE, so the note offers guidance rather than a definitive metric selection rule.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
14 Own interpretation · 6 No basis given · 4 Supported · 3 Sources not found · 3 Own result · 1 No full text of the sources · 1 Not checked yet
Every source the paper cites for this claim was checked and supports it.
In the paper
“Using hypothetical sets of four errors, Willmott and Matsuura (2005) demonstrated that while keeping the MAE as a constant of 2.0, the RMSE varies from 2.0 to 4.0.”
§ Root mean square error (RMSE) or mean absolute error (MAE)? -Arguments against avoiding RMSE in the literature > 1 Introduction
What the sources say
- Supportedcites Willmott and Matsuura (2005) source
Table 1 identifies five hypothetical sets of four errors, and Section 3 says their RMSE increases as the error magnitudes become more variable. The paper gives the bounds as MAE ≤ RMSE ≤ √n × MAE; with four errors and an MAE of 2.0, those bounds are 2.0 and 4.0. Page numbers are unavailable in our copy. (LLM, conf=0.90)
boostedcorrelational- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
The paper states this without a source or data behind it here, so there is nothing to check it against. The quote shows it is in the paper.
In the paper
“In addition, we show that the RMSE satisfies the triangle inequality requirement for a distance metric, whereas Willmott et al. (2009) indicated that the sums-ofsquares-based statistics do not satisfy this rule.”
- Also stated in: § 3 Triangle inequality of a metric · boosted
“This proves that RMSE satisfies the triangle inequality required for a distance function metric.”
- Also stated in: § 4 Summary and discussion · boosted
“In addition, we demonstrate that the RMSE satisfies the triangle inequality required for a distance function metric.”
§ Root mean square error (RMSE) or mean absolute error (MAE)? -Arguments against avoiding RMSE in the literature > Abstract
boosted- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Also stated in: § 3 Triangle inequality of a metric · boosted
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“When the sample size reaches 100 or above, using the calculated RMSEs one can re-construct the error distribution close to its “truth” or “exact solution”, with its standard deviation within 5 % to its truth (i.e., SE = 1).”
§ Root mean square error (RMSE) or mean absolute error (MAE)? -Arguments against avoiding RMSE in the literature > 2 Interpretation of RMSE and MAE
plaindirect- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- The authors state this as an assumption: The errors are unbiased and follow a normal distribution when presenting the RMSE.
- The authors state this as an assumption: The uncertainties brought in by observation errors or the method used to compare model and observations are not considered.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“For instance, Table 1 shows that neither the RMSEs nor the MAEs are robust when only 4 or 10 samples are used to calculate those values.”
§ Root mean square error (RMSE) or mean absolute error (MAE)? -Arguments against avoiding RMSE in the literature > 2 Interpretation of RMSE and MAE
plainn = 10- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- The authors state this as an assumption: The errors are unbiased and follow a normal distribution when presenting the RMSE.
- The authors state this as an assumption: The uncertainties brought in by observation errors or the method used to compare model and observations are not considered.
A conclusion the paper draws from its own results — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“The RMSE is more appropriate to represent model performance than the MAE when the error distribution is expected to be Gaussian.”
- Also stated in: § 1 Introduction · plain
“When the error distribution is expected to be Gaussian and there are enough samples, the RMSE has an advantage over the MAE to illustrate the error distribution.”
- Also stated in: § 4 Summary and discussion · plain
“We present that the RMSE is not ambiguous in its meaning, and it is more appropriate to use than the MAE when model errors follow a normal distribution.”
§ Root mean square error (RMSE) or mean absolute error (MAE)? -Arguments against avoiding RMSE in the literature > Abstract
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Rests on an assumption: Model errors are likely to have a normal distribution rather than a uniform distribution.
- Also stated in: § 1 Introduction · plain
A conclusion the paper draws from its own results — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“Giving higher weighting to the unfavorable conditions, the RMSE usually is better at revealing model performance differences.”
§ Root mean square error (RMSE) or mean absolute error (MAE)? -Arguments against avoiding RMSE in the literature > 4 Summary and discussion
hedgeddirect- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
In the paper
“The L1-norm and L2-norm are closely related to the MAE and the RMSE, respectively, as shown in Eqs. ( 3) and ( 4): Horn and Johnson, 1990).”
§ Root mean square error (RMSE) or mean absolute error (MAE)? -Arguments against avoiding RMSE in the literature > 3 Triangle inequality of a metric
What the sources say
- Not matchedcites Horn and Johnson, 1990
Couldn’t be matched to a paper in Crossref, so it can’t be checked.
plaincorrelational- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Not matched
In the paper
“In this technical note, we demonstrate that the RMSE is not ambiguous in its meaning, contrary to what was claimed by Willmott et al. (2009).”
- Also stated in: § 4 Summary and discussion · plain
“We present that the RMSE is not ambiguous in its meaning, and it is more appropriate to use than the MAE when model errors follow a normal distribution.”
§ Root mean square error (RMSE) or mean absolute error (MAE)? -Arguments against avoiding RMSE in the literature > Abstract
What the sources say
- Not matchedcites Willmott et al. (2009)
Couldn’t be matched to a paper in Crossref, so it can’t be checked.
boosted- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Also stated in: § 4 Summary and discussion · plain
A conclusion the paper draws from its own results — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“One distinct advantage of RMSEs over MAEs is that RM-SEs avoid the use of absolute value, which is highly undesirable in many mathematical calculations.”
§ Root mean square error (RMSE) or mean absolute error (MAE)? -Arguments against avoiding RMSE in the literature > 4 Summary and discussion
boosteddirect- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
The paper states this without a source or data behind it here, so there is nothing to check it against. The quote shows it is in the paper.
In the paper
“Similarly, one can readily show that, for several sets of errors with the same RMSE, the MAE would vary from set to set.”
§ Root mean square error (RMSE) or mean absolute error (MAE)? -Arguments against avoiding RMSE in the literature > 1 Introduction
hedgedcorrelational- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Probably not a substantial claim. 10
- It may state two separate claims as one. 2
- The quote only partly states this claim. 1
Every source the paper cites for this claim was checked and supports it.
In the paper
“They summarized that the RMSE tends to become increasingly larger than the MAE (but not necessarily in a monotonic fashion) as the distribution of error magnitudes becomes more variable.”
§ Root mean square error (RMSE) or mean absolute error (MAE)? -Arguments against avoiding RMSE in the literature > 1 Introduction
What the sources say
- Supportedcites Willmott and Matsuura (2005) source
The Concluding Remarks state the attributed point directly, including the qualification that the increase need not be monotonic. (LLM, conf=0.95)
hedgedcorrelational- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
Probably not a substantial claim.
- Supported
Every source the paper cites for this claim was checked and supports it.
In the paper
“They concluded that the RMSE varies with the variability of the the error magnitudes and the total-error or averageerror magnitude (MAE), and the sample size n.”
§ Root mean square error (RMSE) or mean absolute error (MAE)? -Arguments against avoiding RMSE in the literature > 1 Introduction
What the sources say
- Supportedcites Willmott and Matsuura (2005) source
The Concluding Remarks state that RMSE depends on error-magnitude variability, MAE, and the square root of sample size. The claim says it varies with sample size n, which accurately conveys that dependence without asserting that the relationship is linear. (LLM, conf=0.93)
boostedcorrelational- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
Probably not a substantial claim. It may state two separate claims as one.
- Supported
Every source the paper cites for this claim was checked and supports it.
In the paper
“Willmott and Matsuura (2005) have simply proved that the RMSE is not equivalent to the MAE, and one cannot easily derive the MAE value from the RMSE (and vice versa).”
§ Root mean square error (RMSE) or mean absolute error (MAE)? -Arguments against avoiding RMSE in the literature > 1 Introduction
What the sources say
- Supportedcites Willmott and Matsuura (2005) source
Section 3 describes an inconsistent relationship between MAE and RMSE, including cases where RMSE changes with error-magnitude variance. Section 4 explains that RMSE depends on MAE, the distribution of error magnitudes, and the number of errors. This supports the claim that the measures are not equivalent and that one cannot generally derive either value from the other alone. (LLM, conf=0.90)
boosted- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
It may state two separate claims as one.
- Supported
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“Table 1 shows that the MAEs converge to 0.8, an approximation to the expectation of 2 π .”
§ Root mean square error (RMSE) or mean absolute error (MAE)? -Arguments against avoiding RMSE in the literature > 2 Interpretation of RMSE and MAE
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
The quote only partly states this claim.
- The authors state this as an assumption: The errors are unbiased and follow a normal distribution when presenting the RMSE.
- The authors state this as an assumption: The uncertainties brought in by observation errors or the method used to compare model and observations are not considered.
The paper states this without a source or data behind it here, so there is nothing to check it against. The quote shows it is in the paper.
In the paper
“When both metrics are calculated, the RMSE is by definition never smaller than the MAE.”
§ Root mean square error (RMSE) or mean absolute error (MAE)? -Arguments against avoiding RMSE in the literature > 1 Introduction
boosted- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: fails — The paper’s conclusions may not depend on it.
- Based: fails — The paper may give no reason why it holds.
Probably not a substantial claim. The paper’s conclusions may not depend on it. The paper may give no reason why it holds.
The paper states this without a source or data behind it here, so there is nothing to check it against. The quote shows it is in the paper.
In the paper
“The MAE is suitable to describe uniformly distributed errors.”
§ Root mean square error (RMSE) or mean absolute error (MAE)? -Arguments against avoiding RMSE in the literature > 2 Interpretation of RMSE and MAE
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: fails — The paper may give no reason why it holds.
Probably not a substantial claim. The paper may give no reason why it holds.
A conclusion the paper draws from its own results — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“For other kinds of distributions, more statistical moments of model errors, such as mean, variance, skewness, and flatness, are needed to provide a complete picture of the model error variation.”
§ Root mean square error (RMSE) or mean absolute error (MAE)? -Arguments against avoiding RMSE in the literature > 4 Summary and discussion
plain- Asserted: passes — The authors put it forward as true.
- Checkable: fails — It may be too vague to check against evidence.
- Load-bearing: fails — The paper’s conclusions may not depend on it.
- Based: passes — The paper gives a reason why it holds.
Probably not a substantial claim. It may be too vague to check against evidence. The paper’s conclusions may not depend on it.
In the paper
“The ratio of RMSE to MAE ranged from 1.63 to 2.29 (see Table 1 of Chai et al., 2009).”
§ Root mean square error (RMSE) or mean absolute error (MAE)? -Arguments against avoiding RMSE in the literature > 1 Introduction
What the sources say
- Not checked — no full text of the sourcecites Chai et al., 2009 source
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: fails — The paper’s conclusions may not depend on it.
- Based: passes — The paper gives a reason why it holds.
Probably not a substantial claim. The paper’s conclusions may not depend on it.
A conclusion the paper draws from its own results — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“In many of the model sensitivity studies that use only RMSE, a detailed interpretation is not critical because variations of the same model will have similar error distributions.”
§ Root mean square error (RMSE) or mean absolute error (MAE)? -Arguments against avoiding RMSE in the literature > 4 Summary and discussion
plaindirect- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: fails — The paper’s conclusions may not depend on it.
- Based: fails — The paper may give no reason why it holds.
Probably not a substantial claim. The paper’s conclusions may not depend on it. The paper may give no reason why it holds.
The paper states this without a source or data behind it here, so there is nothing to check it against. The quote shows it is in the paper.
In the paper
“As every statistical measure condenses a large number of data into a single value, it only provides one projection of the model errors emphasizing a certain aspect of the error characteristics of the model performance.”
- Also stated in: § 4 Summary and discussion · plain
“As stated earlier, any single metric provides only one projection of the model errors and, therefore, only emphasizes a certain aspect of the error characteristics.”
§ Root mean square error (RMSE) or mean absolute error (MAE)? -Arguments against avoiding RMSE in the literature > 1 Introduction
plaindirect- Asserted: passes — The authors put it forward as true.
- Checkable: fails — It may be too vague to check against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
Probably not a substantial claim. It may be too vague to check against evidence.
- Also stated in: § 4 Summary and discussion · plain
A conclusion the paper draws from its own results — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“A combination of metrics, including but certainly not limited to RMSEs and MAEs, are often required to assess model performance.”
- Also stated in: § 4 Summary and discussion · plain
“A combination of metrics, including but certainly not limited to RMSEs and MAEs, are often required to assess model performance.”
§ Root mean square error (RMSE) or mean absolute error (MAE)? -Arguments against avoiding RMSE in the literature > Abstract
plain- Asserted: passes — The authors put it forward as true.
- Checkable: fails — It may be too vague to check against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
Probably not a substantial claim. It may be too vague to check against evidence.
- Also stated in: § 4 Summary and discussion · plain
The paper states this without a source or data behind it here, so there is nothing to check it against. The quote shows it is in the paper.
In the paper
“While the MAE gives the same weight to all errors, the RMSE penalizes variance as it gives errors with larger absolute values more weight than errors with smaller absolute values.”
§ Root mean square error (RMSE) or mean absolute error (MAE)? -Arguments against avoiding RMSE in the literature > 1 Introduction
plaindirect- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
Probably not a substantial claim.
The authors state this as an assumption.
The errors are unbiased and follow a normal distribution when presenting the RMSE.
“The underlying assumption when presenting the RMSE is that the errors are unbiased and follow a normal distribution.”
“We also assume the error sample set is unbiased.”
The paper relies on this without support.
Model errors are likely to have a normal distribution rather than a uniform distribution.
“Because model errors are likely to have a normal distribution rather than a uniform distribution, the RMSE is a better metric to present than the MAE for such a type of data.”
The authors state this as an assumption.
The uncertainties brought in by observation errors or the method used to compare model and observations are not considered.
“The uncertainties brought in by observation errors or the method used to compare model and observations are not considered here.”
The paper relies on this without support.
There are often hundreds of observations available to calculate model statistics.
“Fortunately, there are often hundreds of observations available to calculate model statistics, unlike the examples with n = 4 (Willmott and Matsuura, 2005) and n = 10 ( Willmott et al., 2009).”
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Root mean square error (RMSE) or mean absolute error (MAE)? -Arguments against avoiding RMSE in the literature > 4 Summary and discussion
“| 4 | 0.92, 0.65, 1.48, 1.02, 0.79 0.70, 0.57, 1.33, 1.16, 0.76 | |”
§ Root mean square error (RMSE) or mean absolute error (MAE)? -Arguments against avoiding RMSE in the literature > 1 Introduction
“When both metrics are calculated, the RMSE is by definition never smaller than the MAE.”
Citations
Cites
Horn, R. A., & Johnson, C. R. (1985) · Cited by 22,203
David, F. N., & Tukey, J. W. (1977) · Biometrics · doi:10.2307/2529486 · Cited by 12,707
Willmott, C., & Matsuura, K. (2005) · Climate Research · doi:10.3354/cr030079 · Cited by 6,512 · cited 4×
“Further, Willmott et al. (2009) concluded that the sums-of-squaresbased error statistics such as the RMSE and the standard error have inherent ambiguities and recommended the use of alternates such as the MAE.”
BackgroundMethodInfluentialHuber, P. J., & Ronchetti, E. M. (2009) · Wiley series in probability and statistics · doi:10.1002/9780470434697 · Cited by 1,823
Ambiguities inherent in sums-of-squares-based error statistics
Willmott, C. J., Matsuura, K., & Robeson, S. M. (2008) · Atmospheric Environment · doi:10.1016/j.atmosenv.2008.10.005 · Cited by 212 · cited 1×
“Fortunately, there are often hundreds of observations available to calculate model statistics, unlike the examples with n= 4 (Willmott and Matsuura, 2005) and n= 10 (Willmott et al., 2009).”
BackgroundMcKeen, S. A., Wilczak, J. M., Grell, G., et al. (2005) · Journal of Geophysical Research Atmospheres · doi:10.1029/2005jd005858 · Cited by 208
Savage, N., Agnew, P., Davis, L. S., Ordóñez, C., Thorpe, R., Johnson, C. E., O’Connor, F. M., & Dalvi, M. (2013) · Geoscientific model development · doi:10.5194/gmd-6-353-2013 · Cited by 128
Taylor, M. H., Lösch, M., Wenzel, M., et al. (2013) · Journal of Climate · doi:10.1175/jcli-d-13-00089.1 · Cited by 93
Chai, T., Kim, H. C., Lee, P., et al. (2013) · Geoscientific model development · doi:10.5194/gmd-6-1831-2013 · Cited by 87
Self-citationA multi-physics ensemble of present-day climate regional simulations over the Iberian Peninsula
Jerez, S., Montávez, J. P., Jiménez‐Guerrero, P., et al. (2012) · Climate Dynamics · doi:10.1007/s00382-012-1539-1 · Cited by 80 · cited 2×
“(2009) (e.g., Taylor et al., 2013; Chatterjee et al., 2013; Jerez et al., 2013).”
Method
Cited by
Sorted by citations
Items 2,901–3,000 of 7,174
Comparison of TLS and SLAM technologies for 3D reconstruction of objects with different geometries
Szrek, A., Romańczukiewicz, K., Kujawa, P., et al. (2024) · IOP Conference Series Earth and Environmental Science · doi:10.1088/1755-1315/1295/1/012012 · Cited by 7
Prediction Of Chlorophyll-a As an Index of Harmful Algal Blooms Using Machine Learning Models
Busari, I., Sahoo, D., Harmel, R. D., et al. (2024) · Journal of Natural Resources and Agricultural Ecosystems · doi:10.13031/jnrae.15812 · Cited by 7
An Accurate Volumetric Error Modeling Method for a Stereo Vision System Based on Error Decoupling
Guo, R., Cui, H., Deng, Y. N., et al. (2024) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2024.3394474 · Cited by 7
Groundwater salinization risk in coastal regions triggered by earthquake-induced saltwater intrusion
Kuriqi, A., & Abd‐Elaty, I. (2024) · Stochastic Environmental Research and Risk Assessment · doi:10.1007/s00477-024-02734-y · Cited by 7
Altomare, C., Gironella, X., Marzeddu, A., et al. (2024) · Frontiers in Built Environment · doi:10.3389/fbuil.2024.1372906 · Cited by 7
Chatre, L., Lemerle, X., Bataille, M., et al. (2024) · Powder Technology · doi:10.1016/j.powtec.2024.119981 · Cited by 7
Yang, N., & Li, X. (2024) · IEEE Transactions on Geoscience and Remote Sensing · doi:10.1109/tgrs.2024.3439871 · Cited by 7
Asri, Away, Y., Nasaruddin, N., et al. (2024) · IEEE Access · doi:10.1109/access.2024.3443695 · Cited by 7
Singh, J. K., & Kakkar, D. (2024) · Computational Biology and Chemistry · doi:10.1016/j.compbiolchem.2024.108177 · Cited by 7
Stripe Error Correction for Landsat-7 Using Deep Learning
Adıyaman, H., Varul, Y. E., Bakırman, T., et al. (2024) · PFG – Journal of Photogrammetry Remote Sensing and Geoinformation Science · doi:10.1007/s41064-024-00306-x · Cited by 8
Alatoom, Y. I., Zihan, Z. U. A., Nlenanya, I., et al. (2024) · Infrastructures · doi:10.3390/infrastructures9100179 · Cited by 7
Machine Learning Pipeline for Energy and Environmental Prediction in Cold Storage Facilities
Alkhulaifi, N., Bowler, A. L., Pekaslan, D., Serdaroglu, G., Closs, S., Watson, N. J., & Triguero, I. (2024) · IEEE Access · doi:10.1109/access.2024.3482572 · Cited by 8
Deep learning models security: A systematic review
Tyagi, T., & Singh, A. K. (2024) · Computers & Electrical Engineering · doi:10.1016/j.compeleceng.2024.109792 · Cited by 7
A protein fitness predictive framework based on feature combination and intelligent searching
Zhang, Z., Li, Z., Wang, Q., Wu, H., Yang, M., Zhao, F., Tan, M., & Han, S. (2024) · Protein Science · doi:10.1002/pro.5211 · Cited by 7
Wang, J., Li, Y., Quan, D., Hou, B., Wang, Z., Sima, H., & Sun, J. (2024) · Remote Sensing · doi:10.3390/rs16224280 · Cited by 9
Ultrasound imaging with flexible transducers based on real-time and high-accuracy shape estimation
Gao, X., Huang, L., Huang, P., Wang, Y., & Guo, Y. (2024) · Ultrasonics · doi:10.1016/j.ultras.2024.107551 · Cited by 7
Abere, T., Evrard, O., Chalaux, T., et al. (2025) · Journal of Soils and Sediments · doi:10.1007/s11368-025-03964-5 · Cited by 7
Patel, S., Kalasariya, A., Desai, J. L., et al. (2025) · AAPS PharmSciTech · doi:10.1208/s12249-025-03051-5 · Cited by 7
Moges, W. K., Tegegne, A. S., Mitku, A. A., et al. (2025) · BMC Medical Informatics and Decision Making · doi:10.1186/s12911-025-02917-9 · Cited by 7
Pataki, A., Bertalan, L., Pásztor, L., et al. (2025) · Earth Systems and Environment · doi:10.1007/s41748-025-00605-2 · Cited by 7
Wang, J., Guan, Z., Cai, J., Li, X., Wu, C., Ma, X., Li, Y., Song, R., & Zhang, H. (2024) · IEEE International Conference on Robotics and Biomimetics (ROBIO) · doi:10.1109/robio64047.2024.10907383 · Cited by 7
Wu, W. Q., Zhu, C., Hu, L., & Liu, P. (2025) · Sensors · doi:10.3390/s25134202 · Cited by 8
Olthoff, A. E., Gómez, C., Alday, J. G., et al. (2016) · Journal of Plant Ecology · doi:10.1093/jpe/rtw112 · Cited by 7
Exploiting User Feedbacks in Matrix Factorization for Recommender Systems
Zhang, H., Nikolov, N. S., & Ганчев, И. (2017) · Lecture notes in computer science · doi:10.1007/978-3-319-66854-3_18 · Cited by 7
Effects of complex terrain on net surface longwave radiation in China
Zhu, X., Qiu, X., Zeng, Y., Ren, W., Tao, B., Gao, J., Liu, H., & Tan, Y. (2017) · Theoretical and Applied Climatology · doi:10.1007/s00704-017-2272-9 · Cited by 7
Optimizing the flow adjustment of constituent concentrations via LOESS for trend analysis
Simpson, Z., & Haggard, B. E. (2018) · Environmental Monitoring and Assessment · doi:10.1007/s10661-018-6461-5 · Cited by 7
New Approaches of NARX-Based Forecasting Model. A Case Study on CHF-RON Exchange Rate
COCIANU, C. L., & AVRAMESCU, M.-Ș. (2018) · Informatica Economica · doi:10.12948/issn14531305/22.2.2018.01 · Cited by 7
Assessing Multiple-Target Tracking Performance Of GNN Association Algorithm
Kulmon, P., & Stukovska, P. (2018) · International Radar Symposium · doi:10.23919/irs.2018.8448011 · Cited by 7
A Markov chain grey model: A forecasting of the Philippines electric energy demand
Urrutia, J. D., & Antonil, F. E. (2019) · AIP conference proceedings · doi:10.1063/1.5139183 · Cited by 7
No-reference quality assessment for image-based assessment of economically important tropical woods
Rajagopal, H., Mokhtar, N. B., Izam, T. F. T. M. N., et al. (2020) · PLoS ONE · doi:10.1371/journal.pone.0233320 · Cited by 7
Abubakar, H., Sagir, A. M., & Yusuf, S. (2020) · Journal of Reliability and Statistical Studies · doi:10.13052/jrss1550-4646.13110 · Cited by 7
Visual Analytics System for Energy Data in Smart Cities and Buildings
Alves, A. P., Milani, A. M. P., & Manssour, I. H. (2020) · IEEE International Smart Cities Conference (ISC2) · doi:10.1109/isc251055.2020.9239006 · Cited by 7
Jeyanthi, R., Devanathan, S., & Jayaraman, D. (2020) · Water Science & Technology Water Supply · doi:10.2166/ws.2020.314 · Cited by 7
Detecting and Tracking the Positions of Wild Ungulates Using Sound Recordings
Salem, S. I., Fujisao, K., Maki, M., Okumura, T., & Oki, K. (2021) · Sensors · doi:10.3390/s21030866 · Cited by 7
Ruiz, M. S., Harari, J., Ribeiro, R. B., et al. (2021) · Regional Studies in Marine Science · doi:10.1016/j.rsma.2021.101791 · Cited by 7
Sajjadi, S. H., Khorshidvand, A. R., Jabbari, M., et al. (2021) · Fatigue & Fracture of Engineering Materials & Structures · doi:10.1111/ffe.13464 · Cited by 7
Spectral decomposition of iron-sulfur clusters
Betinol, I. O., Nader, S., & Mansy, S. S. (2021) · Analytical Biochemistry · doi:10.1016/j.ab.2021.114269 · Cited by 9
Chen, C., Xu, Y., Wang, Z., et al. (2021) · Biomedical Signal Processing and Control · doi:10.1016/j.bspc.2021.102433 · Cited by 7
Borger, C. P. D., Petersen, D., & Gill, G. (2021) · Weed Research · doi:10.1111/wre.12489 · Cited by 7
Lin, Q., Zhang, Y., & Zhu, J. (2022) · Acta Oceanologica Sinica · doi:10.1007/s13131-021-1902-3 · Cited by 7
Özkan, Y., YÜREKLİ, B. S., & Süner, A. (2021) · Gümüşhane Üniversitesi Fen Bilimleri Enstitüsü Dergisi · doi:10.17714/gumusfenbil.820882 · Cited by 7
Zahra, N., Setiawan, Y. A., & Prasetyo, L. B. (2022) · IOP Conference Series Earth and Environmental Science · doi:10.1088/1755-1315/950/1/012032 · Cited by 7
Xue, Z., Li, T., Peng, S., et al. (2022) · Journal of Central South University · doi:10.1007/s11771-022-4906-z · Cited by 7
Sonohata, R., Arigoni, D. C. A., Fernandes, E. R., et al. (2022) · Concurrency and Computation Practice and Experience · doi:10.1002/cpe.6877 · Cited by 7
Gab-SSDS: An AI-Based Similar Days Selection Method for Load Forecast
Janković, Z., Vesin, B., Selakov, A., et al. (2022) · Frontiers in Energy Research · doi:10.3389/fenrg.2022.844838 · Cited by 7
Central Pollution Control Board, Bhardwaj, R., Singh, R. K., et al. (2022) · Journal of Water Management Modeling · doi:10.14796/jwmm.c486 · Cited by 7
Oduola, A. A., Luthra, K., & Atungulu, G. G. (2022) · Industrial Crops and Products · doi:10.1016/j.indcrop.2022.115201 · Cited by 7
Martin, T., Tadla, J., & Jobe, Z. (2022) · The Sedimentary Record · doi:10.2110/001c.36638 · Cited by 7
Autoregressive Deep Learning Models for Bridge Strain Prediction
Psathas, A. P., Iliadis, L., Achillopoulou, D. V., Papaleonidas, A., Stamataki, N. K., Bountas, D., & Dokas, Ι. M. (2022) · Communications in computer and information science · doi:10.1007/978-3-031-08223-8_13 · Cited by 7
Ship Navigation and Fuel Profiling based on Noon Report using Neural Network Generative Modeling
Hadi, J. E., Tay, Z. Y., & Konovessis, D. (2022) · Journal of Physics Conference Series · doi:10.1088/1742-6596/2311/1/012005 · Cited by 7
Filter Based Feature Selection Anticipation of Automobile Price Prediction in Azure Machine Learning
Pandit, A., Gupta, A., Bhatia, M., et al. (2022) · International Conference on Machine Learning, Big Data, Cloud and Parallel Computing (COM-IT-CON) · doi:10.1109/com-it-con54601.2022.9850615 · Cited by 7
Yao, Y., Li, X., & Li, Q. (2022) · Computational Intelligence and Neuroscience · doi:10.1155/2022/4383245 · Cited by 7
Anđelić, N., Lorencin, I., Glučina, M., et al. (2022) · Electronics · doi:10.3390/electronics11162623 · Cited by 7
Sebaran Sedimen Dasar Perairan dan Pola Arus Laut Di Muara Sungai Loji, Pekalongan
Pawitra, M. D., Indrayanti, E., Yusuf, M., et al. (2022) · Indonesian Journal of Oceanography · doi:10.14710/ijoce.v4i3.13443 · Cited by 7
Adaptive Broad Echo State Network for Nonstationary Time Series Forecasting
Liu, W., Bai, Y., Jin, X., Su, T., & Kong, J. (2022) · Mathematics · doi:10.3390/math10173188 · Cited by 7
Karmawijaya, M. I., Haq, I. N., Leksono, E., & Widyotriatmo, A. (2022) · International Conference on Electric Vehicular Technology (ICEVT) · doi:10.1109/icevt55516.2022.9924776 · Cited by 8
Lee, S., Wang, I., Lin, G., Li, P.-C., Lee, Y., Chou, C.-Y., Huang, C., & Hsieh, C. (2022) · American Journal of Occupational Therapy · doi:10.5014/ajot.2022.049136 · Cited by 7
IOAM: A Novel Sensor Fusion-Based Wearable for Localization and Mapping
Wu, R., Lee, B. G., Pike, M., et al. (2022) · Remote Sensing · doi:10.3390/rs14236081 · Cited by 7
Nguyen, H.-A. T., Nguyen, H.-D., & Do, T.-H. (2022) · RIVF International Conference on Computing and Communication Technologies (RIVF) · doi:10.1109/rivf55975.2022.10013894 · Cited by 7
OOG- Optuna Optimized GAN Sampling Technique for Tabular Imbalanced Malware Data
Tonmoy, S. M. T. I., & Zaman, S. M. M. (2022) · IEEE International Conference on Big Data (BigData) · doi:10.1109/bigdata55660.2022.10020393 · Cited by 7
Elamary, A. S., Mohamed, M. A., Sharaky, I. A., Mohamed, A. K., Alharthi, Y. M., & Ali, M. A. M. (2023) · Metals · doi:10.3390/met13020232 · Cited by 7
COVID-19 outbreak prediction using Seq2Seq + Attention and Word2Vec keyword time series data
Kim, Y., Park, C.-R., Ahn, J., et al. (2023) · PLoS ONE · doi:10.1371/journal.pone.0284298 · Cited by 7
SELECTED AGRONOMIC TRAITS AND DRONE APPLICATION IN CORN YIELD PREDICTIO
Fikri, M., Farid, M., MUSA, Y., et al. (2023) · SABRAO Journal of Breeding and Genetics · doi:10.54910/sabrao2023.55.2.22 · Cited by 7
Dell’Annunziata, G. N., Adiletta, G., Farroni, F., Sakhnevych, A., & Timpone, F. (2023) · Lubricants · doi:10.3390/lubricants11070269 · Cited by 7
Sathapathy, S. K., & Radhakrishna, M. (2023) · Tectonophysics · doi:10.1016/j.tecto.2023.229990 · Cited by 7
Arifin, M., Widowati, W., & Farikhin, F. (2023) · Ingénierie des systèmes d information · doi:10.18280/isi.280305 · Cited by 7
Estimation of Methane Gas Production in Turkey Using Machine Learning Methods
Uyar, G. F. Ü., Terzioğlu, M. E., Kayakuş, M., et al. (2023) · Applied Sciences · doi:10.3390/app13148442 · Cited by 7
A Multi-modal Multi-task based Approach for Movie Recommendation
Raj, S., Mondal, P., Chakder, D., Saha, S., & Onoe, N. (2023) · International Joint Conference on Neural Networks (IJCNN) · doi:10.1109/ijcnn54540.2023.10191882 · Cited by 7
Machine-Learning Model for Predicting Maintenance Costs of EPDM Roofing Systems
Alashari, M., El‐Rayes, K., & Helaly, H. (2023) · Journal of Performance of Constructed Facilities · doi:10.1061/jpcfev.cfeng-4413 · Cited by 7
Ly, H., & Nguyen, T. (2023) · Results in Physics · doi:10.1016/j.rinp.2023.107036 · Cited by 7
Natarajan, N., & Latif, S. (2023) · Stochastic Environmental Research and Risk Assessment · doi:10.1007/s00477-023-02587-x · Cited by 7
A Deep Learning Framework for Anesthesia Depth Prediction from Drug Infusion History
Chen, M., He, Y., & Yang, Z. (2023) · Sensors · doi:10.3390/s23218994 · Cited by 7
Hydromorphodynamics modeling of dredging and dumping activities in Mirim lagoon, RS, Brazil
Bendô, A. R. R., da Silva, D. V., Costi, J., et al. (2023) · Ocean Engineering · doi:10.1016/j.oceaneng.2023.116219 · Cited by 7
Remote Parkinson's disease severity prediction based on causal game feature selection
Xue, Z., Lu, H., Zhang, T., Guo, X., & Gao, L. (2023) · Expert Systems with Applications · doi:10.1016/j.eswa.2023.122690 · Cited by 8
Local Scaffold Diversity-Contributed Generator for Discovering Potential NLRP3 Inhibitors
Bo, W., Duan, Y., Zou, Y., et al. (2024) · Journal of Chemical Information and Modeling · doi:10.1021/acs.jcim.3c01818 · Cited by 7
Predicting Team Well-Being through Face Video Analysis with AI
Müller, M., Dupuis, A., Zeulner, T., Vazquez, I., Hagerer, G., & Gloor, P. A. (2024) · Applied Sciences · doi:10.3390/app14031284 · Cited by 9
Cheng, C., Wu, Y., Liu, Q., et al. (2024) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2024.3418071 · Cited by 7
Feature Importance and Predictive Modeling for Multi-source Healthcare Data with Missing Values
Srinivasan, K. K., Currim, F., Ram, S., Lindberg, C. M., STERNBERG, E. M., Skeath, P. R., Najafi, B., Razjouyan, J., Lee, H.-K., Foe-Parker, C., et al. (2016) · International Conference on Digital Health · doi:10.1145/2896338.2896347 · Cited by 7
Ashworth, E. C., Hesp, S. A., & Hall, N. G. (2016) · Canadian Journal of Fisheries and Aquatic Sciences · doi:10.1139/cjfas-2016-0409 · Cited by 7
Recursive multivariate principal‐monotonicity inferential climate downscaling
Cheng, G., Huang, G., Dong, C., et al. (2017) · Quarterly Journal of the Royal Meteorological Society · doi:10.1002/qj.3126 · Cited by 7
A theoretical model developed for predicting nail withdrawal load from wood by mechanics
Wang, Y.-R., & Lee, S.-H. (2017) · European Journal of Wood and Wood Products · doi:10.1007/s00107-017-1227-2 · Cited by 7
Yang, Y., Cai, Q., Xie, B., et al. (2017) · Journal of Iron and Steel Research International · doi:10.1016/s1006-706x(17)30138-3 · Cited by 7
A novel power output model for photovoltaic system
Kittisontirak, S., Dawan, P., Atiwongsangthong, N., et al. (2017) · International Electrical Engineering Congress (iEECON) · doi:10.1109/ieecon.2017.8075768 · Cited by 7
A novel hybrid subset-learning method for predicting risk factors of atherosclerosis
Xie, J., Wang, H., Zhang, J., Meng, C., Kong, Y., Mao, S., Xu, L., & Zhang, W. (2017) · IEEE International Conference on Bioinformatics and Biomedicine (BIBM) · doi:10.1109/bibm.2017.8217987 · Cited by 7
Energy and rate modeling of data download over LTE with respect to received signal characteristics
Uludağ, K., & Korçak, Ö. (2017) · International Telecommunication Networks and Applications Conference (ITNAC) · doi:10.1109/atnac.2017.8215395 · Cited by 7
Improvements and Applications in Climate Data Analysis for Determining Reference Rainfall Years
Albright, C. M., & Schramm, H. C. (2018) · Journal of Applied Meteorology and Climatology · doi:10.1175/jamc-d-17-0267.1 · Cited by 7
Predictive applications of Australian flood loss models after a temporal and spatial transfer
Nafari, R. H., & Ngo, T. (2018) · Geomatics Natural Hazards and Risk · doi:10.1080/19475705.2018.1445666 · Cited by 7
GEOMETRIC SUBSTITUTE MODELS FOR EFFICIENT SCALING OF DIMENSIONS DURING VEHICLE ARCHITECTURE DESIGN
Felgenhauer, M., Angerer, C., Marksteiner, R., et al. (2018) · Proceedings of the ... International Design Conference/Design ... · doi:10.21278/idc.2018.0176 · Cited by 7
Antarctic Verification of the Australian Numerical Weather Prediction Model
Schroeter, B. J. E., Reid, P., Bindoff, N. L., et al. (2019) · Weather and Forecasting · doi:10.1175/waf-d-18-0171.1 · Cited by 7
Kang, K. H., Shin, S. H., Jung, J., & Kim, Y. T. (2019) · Concurrency and Computation Practice and Experience · doi:10.1002/cpe.5455 · Cited by 7
Verification Methods for Surrogate Models
Jiang, P., Zhou, Q., & Shao, X. (2019) · Springer tracts in mechanical engineering · doi:10.1007/978-981-15-0731-1_5 · Cited by 7
Prying into Private Spaces Using Mobile Device Motion Sensors
Fyke, Z., Griswold-Steiner, I., & Serwadda, A. (2019) · International Conference on Privacy, Security and Trust (PST) · doi:10.1109/pst47121.2019.8949056 · Cited by 7
Opio, R., Sabiiti, G., Nimusiima, A., et al. (2020) · Journal of Geoscience and Environment Protection · doi:10.4236/gep.2020.84002 · Cited by 7
Yi, H.-S., Lee, B.-M., Jang, S., Lee, S., & An, K. (2020) · Ecological Engineering · doi:10.1016/j.ecoleng.2020.105910 · Cited by 7
Predicting Particle Fineness in a Cement Mill
Lange, R., Lange, T., & van Zyl, T. L. (2020) · International Conference on Information Fusion (FUSION) · doi:10.23919/fusion45008.2020.9190236 · Cited by 7
Monitoring, Diffusion and Source Speculation Model of Urban Soil Pollution
Li, Z., Lu, W., & Huang, J. (2020) · Processes · doi:10.3390/pr8111339 · Cited by 7
Chiang, Y.-L., Wang, J.-C., Sun, C., et al. (2020) · IEEE Access · doi:10.1109/access.2020.3034489 · Cited by 7
A regional analysis model of maize kernel moisture
Li, L., Ming, B., Gao, S., et al. (2020) · Agronomy Journal · doi:10.1002/agj2.20532 · Cited by 7
Machine learning to predict refractory corrosion during nuclear waste vitrification
Smith-Gray, N. J., Sargin, I., Beckman, S. P., et al. (2021) · MRS Advances · doi:10.1557/s43580-021-00031-2 · Cited by 7
Najeeb, M. R., Qasim, O. S., & Entesar, A. (2021) · Journal of Physics Conference Series · doi:10.1088/1742-6596/1879/3/032048 · Cited by 7
Metadata
- Authors
- Chai, T., & Draxler, R. R.
- Affiliations
- National Oceanic and Atmospheric Administration (US)
- Venue
- Geoscientific Model Development
- Publisher
- Copernicus GmbH
- Published
- 2014-06-30
- Volume
- 7
- Issue
- 3
- Pages
- 1247-1250
- ISSN
- 1991-959X (ISSN-L)
- 1991-9603
- OpenAlex
- W2102148524
- Semantic Scholar
- 8c42db1839098b46f18265907464c16e49bb7a1c
- Cited by
- 7,178
- References
- 12
- Citations by year
- 2026: 1015 · 2025: 1120 · 2024: 980 · 2023: 873 · 2022: 751 · 2021: 683 · 2020: 538 · 2019: 411 · 2018: 324 · 2017: 235 · 2016: 175 · 2015: 59 · 2014: 13
- FWCI
- 106.31
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Geoscientific model development (publishedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- National Oceanic and Atmospheric Administration (NA09NES4400006)
- Topics
- Physical Sciences › Earth and Planetary Sciences › Atmospheric Science › Meteorological Phenomena and Simulations
- Physical Sciences › Environmental Science › Water Science and Technology › Hydrology and Watershed Management Studies
- Social Sciences › Decision Sciences › Management Science and Operations Research › Forecasting Techniques and Applications
- Keywords
- root mean square error, mean absolute error, model evaluation metrics, error distribution, Gaussian errors, triangle inequality, distance measures, model evaluation, hydrological model evaluation
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
A language model drew the claims from the paper on 2026-10-17, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-17 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
