The DOI matches its Crossref record; 9 of the 9 references it cites were found in a registry or an index.
Exploring the impact of forcing error characteristics on physically based snow simulations within a global sensitivity analysis framework
Open accessAbstract
Physically based models provide insights into key hydrologic processes but are associated with uncertainties due to deficiencies in forcing data, model parameters, and model structure. Forcing uncertainty is enhanced in snow-affected catchments, where weather stations are scarce and prone to measurement errors, and meteorological variables exhibit high variability. Hence, there is limited understanding of how forcing error characteristics affect simulations of cold region hydrology and which error characteristics are most important. Here we employ global sensitivity analysis to explore how (1) different error types (i.e., bias, random errors), (2) different error probability distributions, and (3) different error magnitudes influence physically based simulations of four snow variables (snow water equivalent, ablation rates, snow disappearance, and sublimation). We use the Sobol' global sensitivity analysis, which is typically used for model parameters but adapted here for testing model sensitivity to coexisting errors in all forcings. We quantify the Utah Energy Balance model's sensitivity to forcing errors with 1 840 000 Monte Carlo simulations across four sites and five different scenarios. Model outputs were (1) consistently more sensitive to forcing biases than random errors, (2) generally less sensitive to forcing error distributions, and (3) critically sensitive to different forcings depending on the relative magnitude of errors. For typical error magnitudes found in areas with drifting snow, precipitation bias was the most important factor for snow water equivalent, ablation rates, and snow disappearance timing, but other forcings had a more dominant impact when precipitation uncertainty was due solely to gauge undercatch. Additionally, the relative importance of forcing errors depended on the model output of interest. Sensitivity analysis can reveal which forcing error characteristics matter most for hydrologic modeling.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Factorial Sampling Plans for Preliminary Computational Experiments
Morris, M. D. (1991) · Technometrics · doi:10.1080/00401706.1991.10484804 · Cited by 4,943
Saltelli, A., Annoni, P., Azzini, I., Campolongo, F., Ratto, M., & Tarantola, S. (2010) · Computer Physics Communications · doi:10.1016/j.cpc.2009.09.018 · Cited by 3,623
Human-Induced Changes in the Hydrology of the Western United States
Barnett, T. P., Pierce, D. W., Hidalgo, H. G., Bonfils, C., Santer, B. D., Das, T., Bala, G., Wood, A. W., Nozawa, T., Mirin, A. A., et al. (2008) · Science · doi:10.1126/science.1152538 · Cited by 1,193
Identification and Review of Sensitivity Analysis Methods
Christopher Frey, H., & Patil, S. R. (2002) · Risk Analysis · doi:10.1111/0272-4332.00039 · Cited by 1,036
Analysis of variance designs for model output
Jansen, M. J. W. (1999) · Computer Physics Communications · doi:10.1016/s0010-4655(98)00154-4 · Cited by 650
Equifinality of formal (DREAM) and informal (GLUE) Bayesian approaches in hydrologic modeling?
Vrugt, J. A., ter Braak, C. J. F., Gupta, H. V., & Robinson, B. A. (2009) · Stochastic Environmental Research and Risk Assessment · doi:10.1007/s00477-008-0274-y · Cited by 455
Luo, W., Taylor, M. C., & Parker, S. R. (2008) · International Journal of Climatology · doi:10.1002/joc.1583 · Cited by 273
Challenges in obtaining reliable measurements of point rainfall
Sieck, L. C., Burges, S. J., & Steiner, M. (2007) · Water Resources Research · doi:10.1029/2005wr004519 · Cited by 196
Snowmelt energy balance in a burned forest plot, Crowsnest Pass, Alberta, Canada
Burles, K., & Boon, S. (2011) · Hydrological Processes · doi:10.1002/hyp.8067 · Cited by 117 · cited 4×
“The last is evident in studies that only consider single types of forcing errors (e.g., bias) and single distributions (e.g., uniform) and examines errors separately (Burles and Boon, 2011; Koivusalo and Heikinheimo, 1999; Raleigh and Lundquist, 2012; Xia et al., 2005).”
BackgroundInfluential
Cited by
An assessment of differences in gridded precipitation datasets in complex terrain
Henn, B., Newman, A. J., Livneh, B., Daly, C., & Lundquist, J. D. (2018) · Journal of Hydrology · doi:10.1016/j.jhydrol.2017.03.008 · Cited by 322
Self-citationESM-SnowMIP: assessing snow models and quantifying snow-related climate feedbacks
Krinner, G., Derksen, C., Essery, R., Flanner, M., Hagemann, S., Clark, M., Hall, A., Rott, H., Brutel-Vuilmet, C., Kim, H., et al. (2018) · Geoscientific Model Development · doi:10.5194/gmd-11-5027-2018 · Cited by 262
Self-citation
Metadata
- Authors
- Raleigh, M. S., Lundquist, J. D., & Clark, M. P.
- Venue
- Hydrology and Earth System Sciences
- Publisher
- Copernicus GmbH
- Published
- 2015-07-20
- Volume
- 19
- Issue
- 7
- Pages
- 3153-3179
- ISSN
- 1027-5606 (ISSN-L)
- 1607-7938
- OpenAlex
- W2116767975
- Cited by
- 207
- References
- 9
- FWCI
- 10.08
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Exploring the impact of forcing error characteristics on physically based snow simulations within a global sensitivity analysis framework. https://app.cochat.ai/papers/10.5194/hess-19-3153-2015
- The paper
- Raleigh, M. S., Lundquist, J. D., & Clark, M. P. (2015). Exploring the impact of forcing error characteristics on physically based snow simulations within a global sensitivity analysis framework. Hydrology and Earth System Sciences. https://doi.org/10.5194/hess-19-3153-2015
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.