Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat

The DOI matches its Crossref record; 28 of the 28 references it cites were found in a registry or an index; none of the 2 sources its claims cite is checked for support yet.

Sliding mode control of electro-hydraulic servo system based on double observers

Open access
Su, Xiaoyu, Zheng, Xinyu · 2024 · Mechanical Sciences

Abstract

In this paper, in order to solve the real-time state value acquisition and external-disturbance problems faced during the working process of an electro-hydraulic servo system, a sliding mode controller based on dual observers is designed, which enables the system to effectively acquire the state value and realize better control accuracy. The method uses a high-gain observer to obtain the system state in real time and then adds a perturbation observer to provide more accurate state and perturbation observations for the sliding mode controller. The dual observer observes the obtained states and external perturbations and feeds these back to the sliding mode controller to control the system accurately. Finally, the observation performance of the observers is verified by comparative simulation, and the proposed control method can improve the control accuracy.

Overview

CoChat Summary

TL;DR

The paper designs a sliding mode controller for an electro-hydraulic servo system using a dual-observer scheme: a high-gain observer for system states plus a nonlinear disturbance observer for external disturbances. Comparative simulations show the dual-observer sliding mode controller (DGSMC) reduces tracking error and improves control accuracy over a high-gain-observer-only sliding mode controller (HGSMC).

Key findings

  • In working condition I, DGSMC reduced steady-state error to ±2.2 × 10⁻³, compared with HGSMC steady-state error of 2.54 × 10⁻³ ∼ −3.5 × 10⁻³, and improved error accumulation by 25.2 % over HGSMC.
  • ITAE values in condition I were 0.08957 for HGSMC and 0.067 for DGSMC; average tracking errors were 0.0027 and 0.0023, with MSE 5.036 × 10⁻⁵ and 4.55 × 10⁻⁵, respectively.
  • In working condition II, with larger disturbance, HGSMC ITAE was 0.12 and DGSMC ITAE was 0.068; average tracking errors were 0.0032 and 0.0023, with MSE 4.48 × 10⁻⁵ and 4.38 × 10⁻⁵.
  • The dual observer maintained a small observation-error range as external load disturbance increased, whereas the single high-gain observer’s state observation error increased.

Methods

  • The study models an electro-hydraulic position servo system and designs a sliding mode controller based on a high-gain observer plus a nonlinear disturbance observer, with Lyapunov-based stability proofs for the observers and controller.
  • Simulations were built in MATLAB-Simulink with a 0.001 s step size, controller output limited to (−10, +10), and tracking signal θ_d = 5/9 π sin t.
  • HGSMC and DGSMC were compared under two disturbance conditions: I (D = 300 + 50 sin t) and II (D = 500 + 100 sin t), using ITAE, average tracking error, and MSE.

Limitations

  • The paper states that the proposed method cannot be experimentally verified because the laboratory cannot currently meet the experimental conditions.
  • The paper states future research can be in the direction of energy saving.
  • Evident from the text: validation is simulation-only, with no experimental results for the proposed DGSMC; the paper also notes that no data sets were used.

Model-written summary. Check it against the paper before relying on it.

Integrity signals

Registry

Crossref · 10.5194/ms-15-77-2024

Cites

28 of 28 references verified0 citation errors · 0 not checkable

Statistics

Nothing to recompute.

Figures

Figure 1 Electro-hydraulic servo system structure diagram.
Figure 1 Electro-hydraulic servo system structure diagram.CC-BY · From the PDF
Image 2
CC-BY · From the PDF
Image 3
CC-BY · From the PDF
Figure 4 Tracking-error comparison chart.
Figure 4 Tracking-error comparison chart.CC-BY · From the PDF
Figure 5 Observation effect diagram of a single observer (b, d, f) and a double observer (a, c, e, g) .
Figure 5 Observation effect diagram of a single observer (b, d, f) and a double observer (a, c, e, g) .CC-BY · From the PDF
Image 6
CC-BY · From the PDF
Figure 7 Tracking-error comparison chart.
Figure 7 Tracking-error comparison chart.CC-BY · From the PDF

Verification

Claims the paper makes

0 Valid · 3 Not valid · 2 Not checked · 29 Own results and interpretations

10 more claims

Create a free account to see all 34 claims and to verify the 2 references still open.

See all claims — free account
  • It may state two separate claims as one. 16
  • Probably not a substantial claim. 4

Create a free account to see these claims.

Citations

Cites

Show all 26 references

Cited by

See all 6

Metadata

Authors
Su, X., & Zheng, X.
Affiliations
Shanghai University of Engineering Science (CN)
Corresponding author
Su, Xiaoyu
Venue
Mechanical Sciences
Published
2024-02-13
Volume
15
Issue
1
Pages
77-85
ISSN
  • 2191-9151 (ISSN-L)
  • 2191-916X
OpenAlex
W4391785216
Cited by
6
References
26
Citations by year
2026: 4 · 2025: 2
FWCI
0.81
Type
journal article
Language
en
Open access
Locations
  • Mechanical sciences (publishedVersion, cc-by)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
Topics
  • Physical Sciences › Engineering › Mechanical Engineering › Hydraulic and Pneumatic Systems
  • Physical Sciences › Engineering › Control and Systems Engineering › Adaptive Control of Nonlinear Systems
  • Physical Sciences › Engineering › Control and Systems Engineering › Dynamics and Control of Mechanical Systems
Keywords
sliding mode control, electro-hydraulic servo system, dual observer, high-gain observer, perturbation observer, state estimation, disturbance estimation, control accuracy

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

A language model drew the claims from the paper on 2026-09-28, under version 3 of the claim definition (prompt extract-v3).

A second model labelled each claim on 2026-09-28 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Sliding mode control of electro-hydraulic servo system based on double observers. https://app.cochat.ai/papers/10.5194/ms-15-77-2024
The paper
Su, X., & Zheng, X. (2024). Sliding mode control of electro-hydraulic servo system based on double observers. Mechanical Sciences. https://doi.org/10.5194/ms-15-77-2024

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.