The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
HIRESSS: a physically based slope stability simulator for HPC applications
Open accessAbstract
HIRESSS (HIgh REsolution Slope Stability Simulator) is a physically based distributed slope stability simulator for analyzing shallow landslide triggering conditions in real time and on large areas using parallel computational techniques. The physical model proposed is composed of two parts: hydrological and geotechnical. The hydrological model receives the rainfall data as dynamical input and provides the pressure head as perturbation to the geotechnical stability model that computes the factor of safety (FS) in probabilistic terms. The hydrological model is based on an analytical solution of an approximated form of the Richards equation under the wet condition hypothesis and it is introduced as a modeled form of hydraulic diffusivity to improve the hydrological response. The geotechnical stability model is based on an infinite slope model that takes into account the unsaturated soil condition. During the slope stability analysis the proposed model takes into account the increase in strength and cohesion due to matric suction in unsaturated soil, where the pressure head is negative. Moreover, the soil mass variation on partially saturated soil caused by water infiltration is modeled. The model is then inserted into a Monte Carlo simulation, to manage the typical uncertainty in the values of the input geotechnical and hydrological parameters, which is a common weak point of deterministic models. The Monte Carlo simulation manages a probability distribution of input parameters providing results in terms of slope failure probability. The developed software uses the computational power offered by multicore and multiprocessor hardware, from modern workstations to supercomputing facilities (HPC), to achieve the simulation in reasonable runtimes, compatible with civil protection real time monitoring. A first test of HIRESSS in three different areas is presented to evaluate the reliability of the results and the runtime performance on large areas.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated Soils
van Genuchten, M. T. (1980) · Soil Science Society of America Journal · doi:10.2136/sssaj1980.03615995004400050002x · Cited by 27,578
Metropolis, N., & Ulam, S. (1949) · Journal of the American Statistical Association · doi:10.1080/01621459.1949.10483310 · Cited by 6,474
Cited by
Landslide prediction, monitoring and early warning: a concise review of state-of-the-art
Chae, B.-G., Park, H.-J., Catani, F., Simoni, A., & Berti, M. (2017) · Geosciences Journal · doi:10.1007/s12303-017-0034-4 · Cited by 430
Self-citationForecasting the time of failure of landslides at slope-scale: A literature review
Intrieri, E., Carlà, T., & Gigli, G. (2019) · Earth-Science Reviews · doi:10.1016/j.earscirev.2019.03.019 · Cited by 379
Metadata
- Authors
- Rossi, G., Catani, F., Leoni, L., Segoni, S., & Tofani, V.
- Venue
- Natural Hazards and Earth System Sciences
- Publisher
- Copernicus GmbH
- Published
- 2013-01-25
- Volume
- 13
- Issue
- 1
- Pages
- 151-166
- ISSN
- 1561-8633 (ISSN-L)
- 1684-9981
- OpenAlex
- W2170268274
- Cited by
- 164
- References
- 2
- FWCI
- 24.41
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: HIRESSS: a physically based slope stability simulator for HPC applications. https://app.cochat.ai/papers/10.5194/nhess-13-151-2013
- The paper
- Rossi, G., Catani, F., Leoni, L., Segoni, S., & Tofani, V. (2013). HIRESSS: a physically based slope stability simulator for HPC applications. Natural Hazards and Earth System Sciences. https://doi.org/10.5194/nhess-13-151-2013
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.