Spline Fusion: A continuous-time representation for visual-inertial fusion with application to rolling shutter cameras
The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Abstract
This paper describes a general continuous-time framework for visual-inertial simultaneous localization and mapping and calibration. We show how to use a spline parameterization that closely matches the torque-minimal motion of the sensor. Compared to traditional discrete-time solutions, the continuous-time formulation is particularly useful for solving problems with high-frame rate sensors and multiple unsynchronized devices. We demonstrate the applicability of the method for multi-sensor visual-inertial SLAM and calibration by accurately establishing the relative pose and internal parameters of multiple unsynchronized devices. We also show the advantages of the approach through evaluation and uniform treatment of both global and rolling shutter cameras within visual and visual-inertial SLAM systems.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Parallel Tracking and Mapping for Small AR Workspaces
Klein, G., & Murray, D. (2007) · 2007 6th IEEE and ACM International Symposium on Mixed and Augmented Reality · doi:10.1109/ismar.2007.4538852 · Cited by 4,346
DTAM: Dense tracking and mapping in real-time
Newcombe, R. A., Lovegrove, S. J., & Davison, A. J. (2011) · 2011 International Conference on Computer Vision · doi:10.1109/iccv.2011.6126513 · Cited by 2,078 · cited 1×
“Each scanline is effectively a single push-broom camera (left); such scanline-camera measurements are captured over time, which defines the image returned by the actual sensor (right). sequences, such as [9] [18] [24] [28].”
BackgroundSelf-citationUnified Inverse Depth Parametrization for Monocular SLAM
Montiel, J., Civera, J., & Davison, A. (2006) · Robotics: Science and Systems II · doi:10.15607/rss.2006.ii.011 · Cited by 377
Double window optimisation for constant time visual SLAM
Strasdat, H., Davison, A. J., Montiel, J. M. M., & Konolige, K. (2011) · 2011 International Conference on Computer Vision · doi:10.1109/iccv.2011.6126517 · Cited by 296 · cited 1×
“A number of real-time visual odometry and SLAM systems have been proposed previously, including those that operate on stereo sequences, such as [6, 20, 29], and monocular”
BackgroundA hybrid SLAM representation for dynamic marine environments
Bibby, C., & Reid, I. (2010) · 2010 IEEE International Conference on Robotics and Automation · doi:10.1109/robot.2010.5509262 · Cited by 53 · cited 1×
“A 2D spline-based continuous trajectory representation for a SLAM system is introduced in [4],”
Method
Cited by
Engel, J., Koltun, V., & Cremers, D. (2018) · IEEE Transactions on Pattern Analysis and Machine Intelligence · doi:10.1109/tpami.2017.2658577 · Cited by 2,924
Visual SLAM algorithms: a survey from 2010 to 2016
Taketomi, T., Uchiyama, H., & Ikeda, S. (2017) · IPSJ Transactions on Computer Vision and Applications · doi:10.1186/s41074-017-0027-2 · Cited by 725
A Spline-Based Trajectory Representation for Sensor Fusion and Rolling Shutter Cameras
Patron-Perez, A., Lovegrove, S., & Sibley, G. (2015) · International Journal of Computer Vision · doi:10.1007/s11263-015-0811-3 · Cited by 104
“Each scanline is effectively a single push-broom camera (left); such scanline-camera measurements are captured over time, which defines the image returned by the actual sensor (right) (Lovegrove et al. 2013)”
BackgroundMethodInfluentialSelf-citationBatch nonlinear continuous-time trajectory estimation as exactly sparse Gaussian process regression
Anderson, S., Barfoot, T. D., Tong, C. H., & Särkkä, S. (2015) · Autonomous Robots · doi:10.1007/s10514-015-9455-y · Cited by 87
Continuous-Time Trajectory Estimation for Event-based Vision Sensors
Mueggler, E., Gallego, G., & Scaramuzza, D. (2015) · Robotics: Science and Systems XI · doi:10.15607/rss.2015.xi.036 · Cited by 49
Metadata
- Authors
- Lovegrove, S., Patron-Perez, A., & Sibley, G.
- Venue
- Procedings of the British Machine Vision Conference 2013
- Publisher
- British Machine Vision Association
- Published
- 2013
- Pages
- 93.1-93.11
- OpenAlex
- W2019321876
- Cited by
- 106
- References
- 5
- FWCI
- 16.52
- Type
- conference paper
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.