The DOI matches its Crossref record.
The Chemistry of Carbon Black and Reinforcement
Abstract
In this discussion, we have indicated that carbon blacks display both chemical and catalytic activity which appear to be sufficient to radically alter the chemistry of vulcanization. Much of the chemical reactivity results in removal of molecules or reactive intermediates which might otherwise produce crosslinks. However, in some cases the chemical reactivity seems to be associated with catalytic activity. When carbon black is heated with rubber, as during hot mixing or during cure, the following types of reaction are considered possible: a) Alkylation (in a broad sense) of carbon black by rubber molecules. This would be a case of alkylation of an aromatic material by an olefin. b) Isomerization of the double bond structure of rubber molecules resulting in conjugation. c) Chemisorption of rubber molecules with dissociation—dehydrogenation—and chemical combination of the rubber-free radicals so formed with the carbon black surface or with themselves, a type of polymerization. Insofar as addition to carbon black is involved, the results of a) and c) are, for practical purposes, identical. During vulcanization, the action of carbon black will be dependent upon the nature of the rubber, the nature of the curing system and the presence of other compounding ingredients. During cure, carbon black may be considered to act in some, if not all, of the following ways: 1) As a catalyst for dehydrogenation by sulfur. 2) As a catalyst for the oxidation of —SH intermediates to —S—S— crosslinks. 3) As a catalyst to convert polysulfides to disulfides or prevent polysulfide formation. (This particular activity has not been demonstrated ; it is suggested in this review only as a possibility.) 4) As a catalyst in activating accelerators by breaking —S—S— linkages, as in TMTD, —S—(S)x—S— linkages in the MBT polysulfide product of Dogadkin and Tutorskii˘, —S—N— linkages in Santocure, NOBS Special, etc. 5) As a catalyst for hydrogen sulfide formation (associated with 1, above) which is apparently necessary, at least under some conditions, to activate curing systems. 6) As a catalyst in the presence of oxidizing agents for the conversion of hydrogen sulfide (and sulfanes) to sulfur. 7) As a catalyst which promotes a type of decomposition of TMTD, and no doubt other systems, in a manner which is efficient in producing crosslinks. In the initial phases of vulcanization, its activity as a dehydrogenation catalyst is of considerable importance. This probably involves chemisorption with dissociation of α-methylene hydrogen atoms. This activity directs the chemical reactions of vulcanization to the α-methylene carbon atom and may lead directly to coupling rather than addition reactions at the double bond. After the dehydrogenation step, polymerization reactions, as described in this issue by Craig, should also be considered as possible. Agglomeration of carbon black particles plus high crosslink density seems to be strongly indicated. This would certainly result in heterogeneous crosslink distribution which would manifest itself in physical properties and possibly in some “chemical properties” of the reinforced vulcanizates.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Some aspects of the surface chemistry of carbon blacks and other carbons
Boehm, H. P. (1994) · Carbon · doi:10.1016/0008-6223(94)90031-0 · Cited by 3,043
Changes in surface chemistry of activated carbons by wet oxidation
Moreno-Castilla, C., López-Ramón, M. V., & Carrasco-Marı́n, F. (2000) · Carbon · doi:10.1016/s0008-6223(00)00048-8 · Cited by 894
On the characterization of acidic and basic surface sites on carbons by various techniques
Lopez-Ramon, M. V., Stoeckli, F., Moreno-Castilla, C., & Carrasco-Marin, F. (1999) · Carbon · doi:10.1016/s0008-6223(98)00317-0 · Cited by 840
Evidence for the protonation of basal plane sites on carbon
Leon y Leon, C. A., Solar, J. M., Calemma, V, & Radovic, L. R. (1992) · Carbon · doi:10.1016/0008-6223(92)90164-r · Cited by 515
The dynamic properties of carbon black loaded natural rubber vulcanizates. Part II
Payne, A. R. (1962) · Journal of Applied Polymer Science · doi:10.1002/app.1962.070062115 · Cited by 250
Metadata
- Authors
- Studebaker, M. L.
- Venue
- Rubber Chemistry and Technology
- Publisher
- Rubber Division, ACS
- Published
- 1957-11
- Volume
- 30
- Issue
- 5
- Pages
- 1400-1483
- ISSN
- 0035-9475 (ISSN-L)
- 1943-4804
- OpenAlex
- W2271938255
- Cited by
- 167
- References
- 0
- FWCI
- 7.80
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: The Chemistry of Carbon Black and Reinforcement. https://app.cochat.ai/papers/10.5254/1.3542764
- The paper
- Studebaker, M. L. (1957). The Chemistry of Carbon Black and Reinforcement. Rubber Chemistry and Technology. https://doi.org/10.5254/1.3542764
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.