Mesoscopic Mechanical Analysis of Filled Elastomer with 3D-Finite Element Analysis and Transmission Electron Microtomography
The DOI matches its Crossref record.
Abstract
Analysis of deformation of the filled elastomer in mesoscopic scale was investigated with 3-D FEM (Finite Element Analysis). Combination of 3-D TEMT (Transmission Electron Micro Tomography) and Voxel-FEM enables us to reconstruct mesoscopic scale 3-D image and calculate 3-D strain distribution. To the first approximation, the calculated stress-strain behavior shows a good agreement with the experimental results. The strain concentration over 200% can be seen between carbon black aggregates, even if the overall strain is only 15%. The rubber occluded by carbon black aggregates can also be observed. The virtual rubber model constructed with perfectly dispersed fillers was also calculated. This shows less overall stress than that of the actual filled model reconstructed with 3-D TEMT image. It is found that the occluded rubber can behave as a hard domain and is an important factor of the filler reinforcement effect on rubber.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“When a pre-cracked particle-reinforced elastomer specimen with a 4 × 5 mm 2 cross-section was loaded in tension, Akutagawa et al. [398] found a highly localized strain region near the crack tip in a roughly circular area with diameter 0.5 mm.”
From Challenges in Multiscale Modeling of Polymer Dynamics (2013) · cites this paper as [398]
In the citing paper
“When the applied global strain was about 15%, they found a strikingly high strain concentration, about 200%, between the fillers.”
From Challenges in Multiscale Modeling of Polymer Dynamics (2013) · cites this paper as [398]
In the citing paper
“This agrees with the three-to 13-fold strain localization observed in the experiments [398,399].”
From Challenges in Multiscale Modeling of Polymer Dynamics (2013) · cites this paper as [398]
Citations
Cites
Still being checked.
Cited by
Nguyen, T. T., Yvonnet, J., Zhu, Q.-Z., Bornert, M., & Chateau, C. (2016) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2015.10.007 · Cited by 359
3D stereolithography printing of graphene oxide reinforced complex architectures
Lin, D., Jin, S., Zhang, F., Wang, C., Wang, Y., Zhou, C., & Cheng, G. J. (2015) · Nanotechnology · doi:10.1088/0957-4484/26/43/434003 · Cited by 228
Challenges in Multiscale Modeling of Polymer Dynamics
Li, Y., Abberton, B., Kröger, M., & Liu, W. (2013) · Polymers · doi:10.3390/polym5020751 · Cited by 222
“This agrees with the three- to 13-fold strain localization observed in the experiments [398,399].”
BackgroundResultTransmission electron microtomography in polymer research
Jinnai, H., & Spontak, R. J. (2008) · Polymer · doi:10.1016/j.polymer.2008.12.023 · Cited by 143
Self-citationFLOCCULATION, REINFORCEMENT, AND GLASS TRANSITION EFFECTS IN SILICA-FILLED STYRENE-BUTADIENE RUBBER
Robertson, C. G., Lin, C. J., Bogoslovov, R. B., Rackaitis, M., Sadhukhan, P., Quinn, J. D., & Roland, C. M. (2011) · Rubber Chemistry and Technology · doi:10.5254/1.3601885 · Cited by 120
Two-scale mechanism-based theory of nonlinear viscoelasticity
Tang, S., Steven Greene, M., & Liu, W. K. (2012) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2011.11.003 · Cited by 87
Super-resolution for asymmetric resolution of FIB-SEM 3D imaging using AI with deep learning
Hagita, K., Higuchi, T., & Jinnai, H. (2018) · Scientific Reports · doi:10.1038/s41598-018-24330-1 · Cited by 91
Self-citationReinforcement in Natural Rubber Elastomer Nanocomposites: Breakdown of Entropic Elasticity
Pérez-Aparicio, R., Vieyres, A., Albouy, P., Sanséau, O., Vanel, L., Long, D., & Sotta, P. (2013) · Macromolecules · doi:10.1021/ma401910c · Cited by 69
Reconsideration of the Rheology of Silica Filled Natural Rubber Compounds
Song, Y., Zeng, L., & Zheng, Q. (2017) · The Journal of Physical Chemistry B · doi:10.1021/acs.jpcb.7b02760 · Cited by 58
Yasin, S., Hussain, M. A., Zheng, Q., & Song, Y. (2020) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2020.10.094 · Cited by 57
Huang, M., Tunnicliffe, L. B., Thomas, A. G., & Busfield, J. J. C. (2015) · European Polymer Journal · doi:10.1016/j.eurpolymj.2015.03.024 · Cited by 50
Flocculation and Viscoelastic Behaviour in Carbon Black-Filled Natural Rubber
Tunnicliffe, L. B., Kadlčák, J., Morris, M. D., Shi, Y., Thomas, A. G., & Busfield, J. J. C. (2014) · Macromolecular Materials and Engineering · doi:10.1002/mame.201400117 · Cited by 49
Local Deformation in Carbon Black-Filled Polyisoprene Rubbers Studied by NMR and X-ray Diffraction
Dupres, S., Long, D., Albouy, P., & Sotta, P. (2009) · Macromolecules · doi:10.1021/ma900006y · Cited by 49
Zhou, J., Wang, W., Song, Y., & Zheng, Q. (2023) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2023.107432 · Cited by 45
Nonentropic Reinforcement in Elastomer Nanocomposites
Sotta, P., Albouy, P., Taha, M. A., Long, D., Grau, P., Fayolle, C., & Papon, A. (2017) · Macromolecules · doi:10.1021/acs.macromol.7b00698 · Cited by 40
Chen, L., Song, L., Li, J., Chen, P., Huang, N., & Li, L. (2016) · Macromolecular Materials and Engineering · doi:10.1002/mame.201600235 · Cited by 40
Miyata, T., Nagao, T., Watanabe, D., Kumagai, A., Akutagawa, K., Morita, H., & Jinnai, H. (2021) · ACS Applied Nano Materials · doi:10.1021/acsanm.1c00009 · Cited by 37
Self-citationXu, Y., Xu, Z., Guo, Y., Dong, Y., Ge, T., & Xu, C. (2019) · Journal of Engineering Mechanics · doi:10.1061/(asce)em.1943-7889.0001680 · Cited by 41
Fourier-Transform Rheology of Unvulcanized, Carbon Black Filled Styrene Butadiene Rubber
Schwab, L., Hojdis, N. W., Lacayo, J., & Wilhelm, M. (2016) · Macromolecular Materials and Engineering · doi:10.1002/mame.201500356 · Cited by 37
Li, X., Xia, Y., Li, Z., & Xia, Y. (2012) · Computational Materials Science · doi:10.1016/j.commatsci.2011.11.013 · Cited by 29
Higuchi, T., Gondo, T., Miyazaki, H., Kumagai, A., Akutagawa, K., & Jinnai, H. (2018) · Microscopy · doi:10.1093/jmicro/dfy027 · Cited by 28
Self-citationXu, H., Song, Y., Zhang, Q., & Zheng, Q. (2018) · Polymer · doi:10.1016/j.polymer.2018.01.056 · Cited by 26
Song, Y., Xu, Z., Wang, W., & Zheng, Q. (2021) · Journal of Rheology · doi:10.1122/8.0000270 · Cited by 26
Rheology of end-linking polydimethylsiloxane networks filled with silica
Xu, H., Ding, L., Song, Y., & Wang, W. (2020) · Journal of Rheology · doi:10.1122/8.0000050 · Cited by 24
Yang, S., & Qu, J. (2014) · Modelling and Simulation in Materials Science and Engineering · doi:10.1088/0965-0393/22/6/065011 · Cited by 23
The new interpretation for the heat build-up phenomena of rubbery materials during deformation
Akutagawa, K., Hamatani, S., & Nasi, T. (2015) · Polymer · doi:10.1016/j.polymer.2015.04.040 · Cited by 22
Self-citationIto, M., Liu, H., Kumagai, A., Liang, X., Nakajima, K., & Jinnai, H. (2021) · Langmuir · doi:10.1021/acs.langmuir.1c02788 · Cited by 21
Self-citationThe archetype-genome exemplar in molecular dynamics and continuum mechanics
Greene, M. S., Li, Y., Chen, W., & Liu, W. K. (2013) · Computational Mechanics · doi:10.1007/s00466-013-0925-9 · Cited by 18
Watanabe, D., Miyata, T., Nagao, T., Kumagai, A., & Jinnai, H. (2021) · Journal of Polymer Science · doi:10.1002/pol.20210269 · Cited by 15
Self-citationTechnology for Reducing Tire Rolling Resistance
Akutagawa, K. (2017) · Tribology online · doi:10.2474/trol.12.99 · Cited by 15
Self-citationNguyen, T. T. (2015) · theses.fr (ABES) · doi:10.70675/2075b3d4z5af3z403bz8a95zcb202b584d6d · Cited by 15
Hu, Z.-W., Xu, B., Ge, T., Chen, Z.-H., Huang, X., & Kim, J. (2023) · Journal of Engineering Mechanics · doi:10.1061/jenmdt.emeng-6940 · Cited by 14
Kadowaki, H., Hashimoto, G., Okuda, H., Higuchi, T., Jinnai, H., Seta, E., & Saguchi, T. (2016) · Mechanical Engineering Journal · doi:10.1299/mej.16-00372 · Cited by 11
Self-citationControlling the Performance of Filled Rubbers
Kawahara, S., Yamamoto, Y., & Isono, Y. (2014) · Nihon Reoroji Gakkaishi · doi:10.1678/rheology.42.79 · Cited by 10
Computational material design of filled rubbers using multi-objective design exploration
Koishi, M., Kowatari, N., Figliuzzi, B., Faessel, M., Willot, F., & Jeulin, D. (2017) · CRC Press eBooks · doi:10.1201/9781315223278-73 · Cited by 10
Kato, A., & IKEDA, Y. (2014) · NIPPON GOMU KYOKAISHI · doi:10.2324/gomu.87.252 · Cited by 9
Kishimoto, H., Shinohara, Y., Naito, M., Takeuchi, A., Uesugi, K., Suzuki, Y., & Amemiya, Y. (2012) · Polymer Journal · doi:10.1038/pj.2012.201 · Cited by 9
Ma, C., Ji, T., Robertson, C. G., Rajeshbabu, R., Zhu, J., & Dong, Y. (2017) · Tire Science and Technology · doi:10.2346/tire.17.450301 · Cited by 9
Miyata, T., Kawagoe, Y., Okabe, T., & Jinnai, H. (2022) · Polymer Journal · doi:10.1038/s41428-022-00690-4 · Cited by 9
Self-citationKosugi, K., Arai, H., Zhou, Y., & Kawahara, S. (2016) · Polymer · doi:10.1016/j.polymer.2016.09.005 · Cited by 11
Kojima, T., Washio, T., Hara, S., KOISHI, M., & Amino, N. (2021) · Polymers · doi:10.3390/polym13162683 · Cited by 8
Multiscale Analysis of the Highly Stretchable Carbon−Based Polymer Strain Sensor
Wang, J., Wang, Z., Zuo, Y., & Wang, W. (2023) · Polymers · doi:10.3390/polym15071780 · Cited by 6
A new hypothesis on the mechanism of nano-filled elastomers reinforcement
Sokolov, A. K., Garishin, O. K., & Svistkov, A. L. (2018) · Mechanics of Advanced Materials and Modern Processes · doi:10.1186/s40759-018-0040-x · Cited by 6
Nanoscopic Mechanical Simulation of Elastomers with Finite Element Analysis
Akutagawa, K. (2009) · NIPPON GOMU KYOKAISHI · doi:10.2324/gomu.82.227 · Cited by 5
Self-citationMechanical properties of polymers and nanocomposites close to the glass transition
Dequidt, A., Long, D., Mérabia, S., & Sotta, P. (2016) · CRC Press eBooks · doi:10.1201/9781315305158-12 · Cited by 4
Ikeda, Y., Kato, A., Kohjiya, S., & Nakajima, Y. (2024) · Springer eBooks · doi:10.1007/978-981-97-1267-0_5 · Cited by 3
Akutagawa, K., & Nishi, T. (2018) · Polymer · doi:10.1016/j.polymer.2018.11.062 · Cited by 3
Self-citationFUKAHORI, Y. (2010) · NIPPON GOMU KYOKAISHI · doi:10.2324/gomu.83.182 · Cited by 3
History of Application of CAE to Tire
Nakajima, Y. (2016) · NIPPON GOMU KYOKAISHI · doi:10.2324/gomu.89.151 · Cited by 2
DO WE NEED VERY STIFF FILLERS?
Jiang, B. (2017) · Rubber Chemistry and Technology · doi:10.5254/rct.18.82673 · Cited by 2
Yang, S., & Qu, J. (2014) · International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE) · doi:10.1109/eurosime.2014.6813791 · Cited by 1
Nanomechanics on non-equilibrium thermodynamics for mechanical response of rubbery materials
Akutagawa, K., Hamatani, S., & Kadowaki, H. (2017) · Polymer · doi:10.1016/j.polymer.2017.05.049 · Cited by 1
Self-citationApplication of artificial neural networks in atomic force microscopy
Sokolov, A. Y., Garishin, O. K., & Svistkov, A. L. (2023) · Mechanics of Advanced Materials and Structures · doi:10.1080/15376494.2023.2258516 · Cited by 1
Controlling Performance of Filled Rubbers
Kawahara, S. (2013) · Springer eBooks · doi:10.1007/978-3-642-36199-9_101-1 · Cited by 1
Meso-scopic 3D-finite element analysis of filled elastomer
Hamatani, S., Akutagawa, K., & Heguri, H. (2009) · CRC Press eBooks · doi:10.1201/noe0415563277.ch66
Self-citationSimulation of phantom elastomeric polymer networks
Galiatsatos, V. (2009) · CRC Press eBooks · doi:10.1201/noe0415563277-77
Mechanical behavior of filled rubbers
Isono, Y. (2014) · Springer eBooks · doi:10.1007/978-3-642-36199-9_100-1
Loss Tangent Mapping Measured by Nanorheological Atomic Force Microscopy
Ueda, E., & Nakajima, K. (2018) · NIPPON GOMU KYOKAISHI · doi:10.2324/gomu.91.383
In situ Three-dimensional Observation of Rubber Materials Under Tensile Deformation
Higuchi, T., & Jinnai, H. (2018) · NIPPON GOMU KYOKAISHI · doi:10.2324/gomu.91.370
Self-citationVieyres, A. (2013) · CRC Press eBooks · doi:10.1201/b14964-100
박찬욱 (2020) · Seoul National University Open Repository (Seoul National University)
Multiscale Methods for Lightweight Structure and Material Characterization
Iacobellis, V., & Behdinan, K. (2021) · ASME-Wiley eBooks · doi:10.1115/1.862ama_ch3
Controlling Performance of Filled Rubbers
Kawahara, S. (2015) · Springer eBooks · doi:10.1007/978-3-642-29648-2_101
Mechanical Behavior of Filled Rubbers
Isono, Y. (2015) · Springer eBooks · doi:10.1007/978-3-642-29648-2_100
Direct Visualization of Deformation Behavior of a Nano-composite Material under Uniaxial Extention
Jinnai, H. (2022) · Seikei-Kakou · doi:10.4325/seikeikakou.34.323
Self-citationSIMULATION OF CRACK PROPAGATION IN FILLED ELASTOMERS
Sokolov, A., Garishin, O. K., & Svistkov, A. L. (2023) · Nanoscience and Technology An International Journal · doi:10.1615/nanoscitechnolintj.2023043909
Modeling of the use of AFM in the study of polyurethane samples with a carbonized surface
Garishin, O. K., & Sokolov, A. K. (2023) · ВЕСТНИК ПЕРМСКОГО УНИВЕРСИТЕТА ФИЗИКА · doi:10.17072/1994-3598-2023-2-35-43
Akutagawa, K. (2015) · Journal of The Adhesion Society of Japan · doi:10.11618/adhesion.52.114
Self-citationÉtude du renforcement et de la propagation d’entaille dans les élastomères renforcés
Gabrielle, B. (2010) · theses.fr (ABES) · doi:10.70675/3b30c747zbb7dz41c8zbfdezb6a1239c5156 · Cited by 7
Hybrid hydrogels as model nanocomposites : reinforcement mechanisms by analogy with filled rubbers
Gulluche, A.-C. L. (2019) · theses.fr (ABES) · doi:10.70675/3ac24cfdz5e09z4223za652za54bc3f60b4a
Metadata
- Authors
- Akutagawa, K., Yamaguchi, K., Yamamoto, A., Heguri, H., Jinnai, H., & Shinbori, Y.
- Affiliations
- Bridgestone (Japan) (JP)
- Kyoto Institute of Technology (JP)
- Venue
- Rubber Chemistry and Technology
- Publisher
- Rubber Division, ACS
- Published
- 2008-05
- Volume
- 81
- Issue
- 2
- Pages
- 182-189
- ISSN
- 0035-9475 (ISSN-L)
- 1943-4804
- OpenAlex
- W2324373732
- Cited by
- 68
- References
- 0
- Citations by year
- 2024: 1 · 2023: 6 · 2022: 2 · 2021: 6 · 2020: 3 · 2019: 2 · 2018: 7 · 2017: 7 · 2016: 6 · 2015: 7 · 2014: 6 · 2013: 5 · 2012: 2
- FWCI
- 4.27
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Rubber Chemistry and Technology (publishedVersion)
- Topics
- Physical Sciences › Engineering › Mechanics of Materials › Composite Material Mechanics
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer Science and Applications
- Physical Sciences › Engineering › Biomedical Engineering › Elasticity and Material Modeling
- Keywords
- carbon black aggregates, strain concentration, filler reinforcement, stress-strain behavior, 3D finite element analysis, 3D image reconstruction
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.