The DOI matches its Crossref record.
RUBBER RECYCLING: CHEMISTRY, PROCESSING, AND APPLICATIONS
Abstract
For both environmental and economic reasons, there is broad interest in recycling rubber and in the continued development of recycling technologies. The use of postindustrial materials is a fairly well-established and documented business. Much effort over the past decade has been put into dealing with of end-of-life tires from landfills and vacant fields. It is only in the last few years that more business opportunities for recycled rubber have come to the forefront. Reclaiming rubber has gained increasing interest, more so in Europe than in North America. In those areas, much work has been done to refine the processes used. The major form of recycled rubber is still ground rubber. This is produced either by cryogenic, ambient, or wet grinding. The material is then used neat with sulfur/curatives, binders, or cements. The binders are normally moisture curable urethanes, liquid polybutadienes, or latex to produce items such as mats, floor tiles, and carpet undercushion. Recycled rubber is still used as tire derived fuel, but less so than 10 years ago. Another outlet is as an additive to asphalt. Recycled rubber can be used in the plastics industry, for which much development is being done. Large particle size ground rubber or chips are used in civil engineering applications, landscaping, or artificial turf. In terms of applications, most use is outside of the conventional rubber industry. Cost factors are still addressed in the tire industry. As of 2012, approximately 8–10% recycled material is used in tires. The biggest obstacles to further adaption are safety factors and property loss. Better methods are needed for treating or modifying the rubber surface and for regenerating the rubber through devulcanization. Devulcanization gives the highest quality recycled material in terms of processing and properties. However, shortcomings to devulcanization are reduced process safety and odorous chemicals that are required at present.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Zhang, Z. P., Rong, M. Z., & Zhang, M. Q. (2018) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.03.002 · Cited by 586
Waste tire rubber in polymer blends: A review on the evolution, properties and future
Ramarad, S., Khalid, M., Ratnam, C. T., Chuah, A. L., & Rashmi, W. (2015) · Progress in Materials Science · doi:10.1016/j.pmatsci.2015.02.004 · Cited by 527
Devulcanisation and reclaiming of tires and rubber by physical and chemical processes: A review
Bockstal, L., Berchem, T., Schmetz, Q., & Richel, A. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.07.049 · Cited by 257
LCA as a Tool for the Environmental Management of Car Tire Manufacturing
Katarzyna, P., Izabela, P., Patrycja, B.-W., Weronika, K., & Andrzej, T. (2020) · Applied Sciences · doi:10.3390/app10207015 · Cited by 43
Metadata
- Authors
- Myhre, M., Saiwari, S., Dierkes, W., & Noordermeer, J.
- Venue
- Rubber Chemistry and Technology
- Publisher
- Rubber Division, ACS
- Published
- 2012-09
- Volume
- 85
- Issue
- 3
- Pages
- 408-449
- ISSN
- 0035-9475 (ISSN-L)
- 1943-4804
- OpenAlex
- W1976922744
- Cited by
- 167
- References
- 0
- FWCI
- 4.78
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: RUBBER RECYCLING: CHEMISTRY, PROCESSING, AND APPLICATIONS. https://app.cochat.ai/papers/10.5254/rct.12.87973
- The paper
- Myhre, M., Saiwari, S., Dierkes, W., & Noordermeer, J. (2012). RUBBER RECYCLING: CHEMISTRY, PROCESSING, AND APPLICATIONS. Rubber Chemistry and Technology. https://doi.org/10.5254/rct.12.87973
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.