Student or educator? Sign up with your school email and get 6 months of Pro free.
Cited by 518

The DOI matches its Crossref record.

Mechanisms of energy absorption in special devices for use in earthquake resistant structures

Open access
Kelly, J. M., Skinner, R. I., Heine, A. J.·1972·Bulletin of the New Zealand Society for Earthquake Engineering

Abstract

A structure designed to resist earthquake attack must have a capacity to dissipate kinetic energy induced by the ground motion. In most structures this energy absorption is developed in the vicinity of beam to column connections. Recent research has shown that connections are not reliable when subject to cyclic loading, such as results from earthquake attack. Connections in steel frames deteriorate due to local instabilities in adjacent flanges, and in reinforced concrete frames alternating shear loads produce diagonal tension and bond failures which progressively reduce the strength of the connection. Much work in building research and earthquake engineering in laboratories throughout the world is directed toward increasing the reliability and energy absorption capacity of structural connections. In this paper an alternative approach to this problem is described. This approach is to separate the load carrying function of the structure from the energy absorbing function and to ask if special devices could be incorporated into the structure with the sole purpose of absorbing the kinetic energy generated in the structure by earthquake attack. To determine whether such devices are feasible a study has been undertaken of three essentially different mechanisms of energy absorption. These mechanisms all utilized the plastic deformation of mild steel. They included the rolling of strips, torsion of square and rectangular bars, and the flexure of short thick beams. These mechanisms were selected for intensive study since they were basic to three different types of device each of which was designed for a separate mode of operation in a structural system. The characteristics of these mechanisms which were of primary importance in this study were the load displacement relations, the energy absorption capacity and the fatigue resistance. This information was obtained with a view to the development of devices for specific structural applications. This report describes the tests used to explore the basic mechanisms and the data obtained. It also include s a brief description of tests on scale models of a device which was designed to be located in the piers of a reinforced concrete railway bridge. It has been shown by the tests that the plastic torsion of mild steel is an extremely efficient mechanism for the absorption of energy. It was found that at plastic strains in the range 3% to 12% it was possible to develop energy dissipation of the order of 2000-7500 lb in/in3 per cycle (14-50 x 106 N/M2 per cycle) with lifetimes within the range of 1000 to 100 cycles. It was also shown that the mode of failure in torsion is an extremely favourable one for use in an energy absorbing device in that it took the form of a gradual decay. The other two mechanisms studied were both less efficient and less reliable than torsion and had capacities of 500-2000 lb in/in3 per cycle (3.5 - 14 x 106 N/M2 per cycle) and life times of around 200 to 20 cycles. Nevertheless they lend themselves to more compact devices than does the torsional mechanism and furthermore the devices may be located in regions in a structure where they are readily accessible for replacement after attack.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.5459/bnzsee.5.3.63-88

Cites

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cited by

See all 518

Metadata

Authors
Kelly, J. M., Skinner, R. I., & Heine, A. J.
Venue
Bulletin of the New Zealand Society for Earthquake Engineering
Published
1972-09-30
Volume
5
Issue
3
Pages
63-88
ISSN
  • 0110-0718 (ISSN-L)
  • 2324-1543
  • 1174-9857
OpenAlex
W3131654573
Cited by
518
References
0
FWCI
15.43
Type
journal article
Language
en
Open access
diamond

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Mechanisms of energy absorption in special devices for use in earthquake resistant structures. https://app.cochat.ai/papers/10.5459/bnzsee.5.3.63-88
The paper
Kelly, J. M., Skinner, R. I., & Heine, A. J. (1972). Mechanisms of energy absorption in special devices for use in earthquake resistant structures. Bulletin of the New Zealand Society for Earthquake Engineering. https://doi.org/10.5459/bnzsee.5.3.63-88

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.