The DOI matches its Crossref record.
Sprinkle and Trickle Irrigation System Design Using Tapered Pipes for Pressure Loss Adjusting
Open accessAbstract
Accurate computing of amount of pressure loss is very important in sprinkle and trickle irrigation system design. Not correctly adjusted of pressure loss are causes lack of appropriate performance or failure of sprinkle and trickle irrigation system. By tapered pipes, pressure loss adjusted using increasing or decreasing of pressure head. In this study using HydroCalc software, ability of single and tapered pipes in pressure loss adjusting has been compared. Single and tapered laterals were able to adjusting of pressure loss but single manifolds were not able to achieving to the desired pressure head. In single lateral-tapered manifold system due to the lower pressure loss in laterals, can be use from several types of pipe diameters for manifolds but in tapered lateral-tapered manifold system due to the more pressure loss in laterals, the choice is limited. The best diameters for tapered manifolds with single lateral were 69.2-36.8 mm, 69.2-58.2-36.8 mm, and 58.2-46.0-36.8 mm whereas the best diameters for tapered manifold with tapered lateral were 69.2-46.0-36.8 mm.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Aqueous two-phase system (ATPS): an overview and advances in its applications
Iqbal, M., Tao, Y., Xie, S., Zhu, Y., Chen, D., Wang, X., Huang, L., Peng, D., Sattar, A., Shabbir, M. A. B., et al. (2016) · Biological Procedures Online · doi:10.1186/s12575-016-0048-8 · Cited by 821
Vanalle, R. M., Ganga, G. M. D., Godinho Filho, M., & Lucato, W. C. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.03.066 · Cited by 431
Review: Fullerene based acceptors for efficient bulk heterojunction organic solar cell applications
Ganesamoorthy, R., Sathiyan, G., & Sakthivel, P. (2017) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2016.11.024 · Cited by 323
Huang, L., Sun, X., Li, C., Xu, R., Xu, J., Du, Y., Wu, Y., Ni, J., Cai, H., Li, J., et al. (2016) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2016.08.025 · Cited by 267
Liu, Y., Wang, Y., Dai, Q., & Zhou, Y. (2016) · Analytica Chimica Acta · doi:10.1016/j.aca.2016.07.003 · Cited by 151
Xu, K., Wang, Y., Li, Y., Lin, Y., Zhang, H., & Zhou, Y. (2016) · Analytica Chimica Acta · doi:10.1016/j.aca.2016.10.021 · Cited by 92
Metadata
- Authors
- Valipour, M.
- Venue
- Journal of Agricultural Science
- Published
- 2012-11-11
- Volume
- 4
- Issue
- 12
- ISSN
- 1916-9752 (ISSN-L)
- 1916-9760
- OpenAlex
- W2035397392
- Cited by
- 164
- References
- 0
- FWCI
- 8.75
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.