The DOI matches its Crossref record.
Using airborne and ground-based ranging lidar to measure canopy structure in Australian forests
Abstract
Airborne and ground-based lidars are useful tools to probe the structure of forest canopies. Such information is not readily available from other remote sensing methods but is essential for modern forest inventory in which growth models and ecological assessment are becoming increasingly important. This study was undertaken to investigate the capacity of current airborne and ground-based ranging systems to provide data from which useful forest inventory parameters can be derived. Additional data collected included standard forest inventory, hemispherical photography, and optical point-quadrat sampling. Four contrasting study sites were established within an existing study area in the Bago and Maragle State Forests, New South Wales, Australia. A simple and standard set of models was fitted to the data to establish consistency between methods and current practice. Methods to reduce the bias induced by interaction of the size of the airborne laser scanner (ALS) footprint and thresholding used in ranging systems are demonstrated by the use of first and last returns and the intensity of the returns. A measure analogous to predominant height was calculated from an average of a number of the highest ALS returns within an area. This estimate agreed with field measured predominant heights within the uncertainty of the measurements. Data from a ground-based scanning rangefinder system were used to model leaf area index (LAI). These LAI estimates coincided with those from hemispherical canopy photographs. The validation work presented in this paper justifies further development of the instrumentation and analyses to combine results from multi-angular systems with data from airborne systems to alleviate some of the problems associated with the vertical view. Current laser ranging systems can be used to derive canopy structural parameters such as height, cover, and foliage profile provided information based on multiple returns or the intensity of returns is used to minimize the bias induced by the size of the footprint and the detection threshold.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Mapping global forest canopy height through integration of GEDI and Landsat data
Potapov, P., Li, X., Hernandez-Serna, A., Tyukavina, A., Hansen, M. C., Kommareddy, A., Pickens, A., Turubanova, S., Tang, H., Silva, C. E., et al. (2021) · Remote Sensing of Environment · doi:10.1016/j.rse.2020.112165 · Cited by 1,383
Morsdorf, F., Kötz, B., Meier, E., Itten, K. I., & Allgöwer, B. (2006) · Remote Sensing of Environment · doi:10.1016/j.rse.2006.04.019 · Cited by 470
Beyond 3-D: The new spectrum of lidar applications for earth and ecological sciences
Eitel, J. U. H., Höfle, B., Vierling, L. A., Abellán, A., Asner, G. P., Deems, J. S., Glennie, C. L., Joerg, P. C., LeWinter, A. L., Magney, T. S., et al. (2016) · Remote Sensing of Environment · doi:10.1016/j.rse.2016.08.018 · Cited by 319
Metadata
- Authors
- Lovell, J. L., Jupp, D. L. B., Culvenor, D. S., & Coops, N. C.
- Venue
- Canadian Journal of Remote Sensing
- Publisher
- Informa UK Limited
- Published
- 2003-10
- Volume
- 29
- Issue
- 5
- Pages
- 607-622
- ISSN
- 0703-8992 (ISSN-L)
- 1712-7971
- OpenAlex
- W2152016466
- Cited by
- 524
- References
- 0
- FWCI
- 13.00
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Using airborne and ground-based ranging lidar to measure canopy structure in Australian forests. https://app.cochat.ai/papers/10.5589/m03-026
- The paper
- Lovell, J. L., Jupp, D. L. B., Culvenor, D. S., & Coops, N. C. (2003). Using airborne and ground-based ranging lidar to measure canopy structure in Australian forests. Canadian Journal of Remote Sensing. https://doi.org/10.5589/m03-026
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.