The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Automated estimation of individual conifer tree height and crown diameter via two-dimensional spatial wavelet analysis of lidar data
Abstract
We describe and evaluate a new analysis technique, spatial wavelet analysis (SWA), to automatically estimate the location, height, and crown diameter of individual trees within mixed conifer open canopy stands from light detection and ranging (lidar) data. Two-dimensional Mexican hat wavelets, over a range of likely tree crown diameters, were convolved with lidar canopy height models. Identification of local maxima within the resultant wavelet transformation image then allowed determination of the location, height, and crown diameters of individual trees. In this analysis, which focused solely on individual trees within open canopy forests, 30 trees incorporating seven dominant North American tree species were assessed. Two-dimensional (2D) wavelet-derived estimates were well correlated with field measures of tree height (r = 0.97) and crown diameter (r = 0.86). The 2D wavelet-derived estimates compared favorably with estimates derived using an established method that uses variable window filters (VWF) to estimate the same variables but relies on a priori knowledge of the tree height – crown diameter relationship. The 2D spatial wavelet analysis presented herein could potentially allow automated, large-scale, remote estimation of timber board feet, foliar biomass, canopy volume, and aboveground carbon, although further research testing the limitations of the method in a variety of forest types with increasing canopy closures is warranted.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Estimating forest canopy fuel parameters using LIDAR data
Andersen, H.-E., McGaughey, R. J., & Reutebuch, S. E. (2005) · Remote Sensing of Environment · doi:10.1016/j.rse.2004.10.013 · Cited by 579
Cited by
A New Method for Segmenting Individual Trees from the Lidar Point Cloud
Li, W., Guo, Q., Jakubowski, M. K., & Kelly, M. (2012) · Photogrammetric Engineering & Remote Sensing · doi:10.14358/pers.78.1.75 · Cited by 753
Hyyppä, J., Hyyppä, H., Leckie, D., Gougeon, F., Yu, X., & Maltamo, M. (2008) · International Journal of Remote Sensing · doi:10.1080/01431160701736489 · Cited by 636
Topographic Laser Ranging and Scanning: Principles and Processing
(2017) · CRC Press eBooks · doi:10.1201/9781420051438 · Cited by 400
The role of LiDAR in sustainable forest management
Wulder, M. A., Bater, C. W., Coops, N. C., Hilker, T., & White, J. C. (2008) · The Forestry Chronicle · doi:10.5558/tfc84807-6 · Cited by 388
Determining tree height and crown diameter from high-resolution UAV imagery
Panagiotidis, D., Abdollahnejad, A., Surový, P., & Chiteculo, V. (2017) · International Journal of Remote Sensing · doi:10.1080/01431161.2016.1264028 · Cited by 337
Metadata
- Authors
- Falkowski, M. J., Smith, A. M. S., Hudak, A. T., Gessler, P. E., Vierling, L. A., & Crookston, N. L.
- Venue
- Canadian Journal of Remote Sensing
- Publisher
- Informa UK Limited
- Published
- 2006-01
- Volume
- 32
- Issue
- 2
- Pages
- 153-161
- ISSN
- 0703-8992 (ISSN-L)
- 1712-7971
- OpenAlex
- W2098084344
- Cited by
- 247
- References
- 1
- FWCI
- 13.68
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Automated estimation of individual conifer tree height and crown diameter via two-dimensional spatial wavelet analysis of lidar data. https://app.cochat.ai/papers/10.5589/m06-005
- The paper
- Falkowski, M. J., Smith, A. M. S., Hudak, A. T., Gessler, P. E., Vierling, L. A., & Crookston, N. L. (2006). Automated estimation of individual conifer tree height and crown diameter via two-dimensional spatial wavelet analysis of lidar data. Canadian Journal of Remote Sensing. https://doi.org/10.5589/m06-005
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.