The DOI matches its Crossref record.
Textile Dyeing Wastewater Treatment
Open accessAbstract
Treatment 93 Production of textile industry pollutionTextile Printing and dyeing processes include pre-treatment, dyeing and printing, finishing.The main pollutants are organic matters which come from the pre-treatment process of pulp, cotton gum, cellulose, hemicellulose and alkali, as well as additives and dyes using in dyeing and printing processes.Pre-treatment wastewater accounts for about 45% of the total, and dyeing/printing process wastewater accounts for about 50%~55%, while finishing process produces little.In China, chemical fiber accounts for about 69% of total in which polyester fibers accounts for more than 80%.Cotton accounts for 80% of the natural fiber production.Therefore, the dyeing wastewater analysis of production and pollution is based on these two fibers.Pre-treatment of cotton includes desizing and scouring.The main pollutants are the impurities in the cotton, cotton gum, hemicellulose and the slurry, alkali in weaving process.The current average COD concentration in the pre-treatment is 3000 mg/L.The main pollutants in dyeing/printing are auxiliaries and the residual dyes.The average concentration of COD is 1000 mg/L and the total average concentration is 2000 mg/L after mixing.Pre-treatment of polyester fibers mainly involves in the reduction with alkali.The so-called reduction is treating the polyester fabric with 8% of sodium hydroxide at 90 C for about 45 minutes.Some polyester fabrics will peel off and decompose into terephthalic acid and ethylene glycol so that a thin polyester fabric will have the feel of silk.This process can be divided into continuous and batch type.Taking the batch type as an example, the concentration of COD is up to 20000 mg/L-60000 mg/L.The wastewater from reduction process may account for only 5% of the volume of wastewater, while COD accounts for 60% or more in the conventional dyeing and finishing business.The chroma is one pollutant of the wastewater which causes a lot of concerns.In the dyeing process, the average dyeing rate is more than 90%.It means that the residual dyeing rate in finishing wastewater is about 10%, which is the main reason of contamination.According to the different dyes and process, the chroma is 200 to 500 times higher than before.pH is another factor of the dyeing wastewater.Before the printing and the dyeing process, pH is another factor ,the pH of dyeing wastewater remains between 10 to 11 when treated by alkali at high temperature around 90C in the process of desizing, scouring and mercerization.Polyester base reduction process mainly uses sodium hydroxide, and the total pH is also 10 to 11.Therefore, most dyeing water is alkaline and the first process is to adjust the pH value of the textile dyeing wastewater.The total nitrogen and ammonia nitrogen come from dyes and raw materials, which is not very high, about 10 mg/L.But the urea is needed while using batik techniques.Its total nitrogen is 300 mg/L, which is hard to treat.The phosphorus in the wastewater comes from the phosphor detergents.Considering the serious eutrophication of surface water, it needs to be controlled.Some enterprises use trisodium phosphate so that the concentration of phosphorus will reach 10 mg/L.So, this phosphorus must be removed in the pre-treatment.In the production process, suspended substance comes from fiber scrap and undissolved raw materials.It will be removed through the grille, grid, etc.The suspended solids (SS) in the outflow mainly come from the secondary sedimentation tank, whose sludge has not been separated completely which will reach 10-100 mg/L as usual.Sulfide mainly comes from the sulfur, which is a kind of cheap and qualified dye.Due to its toxicity, it has been forbidden in developed countries.However, in China, some enterprises
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Efficiency of various recent wastewater dye removal methods: A review
Katheresan, V., Kansedo, J., & Lau, S. Y. (2018) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2018.06.060 · Cited by 2,752
A Critical Review on Textile Wastewater Treatments: Possible Approaches
Holkar, C. R., Jadhav, A. J., Pinjari, D. V., Mahamuni, N. M., & Pandit, A. B. (2016) · Journal of Environmental Management · doi:10.1016/j.jenvman.2016.07.090 · Cited by 1,927
Critical review of advanced oxidation processes in organic wastewater treatment
Ma, D., Yi, H., Lai, C., Liu, X., Huo, X., An, Z., Li, L., Fu, Y., Li, B., Zhang, M., et al. (2021) · Chemosphere · doi:10.1016/j.chemosphere.2021.130104 · Cited by 943
Production, Characterization and Treatment of Textile Effluents: A Critical Review
R Ananthashankar, A. G. (2013) · Journal of Chemical Engineering & Process Technology · doi:10.4172/2157-7048.1000182 · Cited by 754
Feasibility of industrial-scale treatment of dye wastewater via bio-adsorption technology
Li, W., Mu, B., & Yang, Y. (2019) · Bioresource Technology · doi:10.1016/j.biortech.2019.01.002 · Cited by 574
Metadata
- Authors
- Wang, Z., Xue, M., Huang, K., & Liu, Z.
- Venue
- Advances in Treating Textile Effluent
- Publisher
- InTech
- Published
- 2011-10-26
- OpenAlex
- W1557788523
- Cited by
- 230
- References
- 0
- FWCI
- 11.54
- Type
- book chapter
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Textile Dyeing Wastewater Treatment. https://app.cochat.ai/papers/10.5772/22670
- The paper
- Wang, Z., Xue, M., Huang, K., & Liu, Z. (2011). Textile Dyeing Wastewater Treatment. Advances in Treating Textile Effluent. https://doi.org/10.5772/22670
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.