Student or educator? Sign up with your school email and get 6 months of Pro free.
Cited by 646

The DOI matches its Crossref record.

The science and engineering of microelectronic fabrication

·1996·Choice Reviews Online

Abstract

PART I: OVERVIEW AND MATERIALS 1. An Introduction to Microelectronic Fabrication 1.1 Microelectronic Technologies -- A Simple Example 1.2 Unit Processes and Technologies 1.3 A Roadmap for the Course 1.4 Summary 2. Semiconductor Substrates 2.1 Phase Diagrams and Solid Solubility 2.2 Crystallography and Crystal Structure 2.3 Crystal Defects 2.4 Czochralski Growth 2.5 Bridgman Growth of GaAs 2.6 Float Zone Growth 2.7 Water Preparation and Specifications 2.8 Summary and Future Trends Problems References PART II: UNIT PROCESSING I: HOT PROCESSING AND ION IMPLANTATION 3. Diffusion 3.1 Fick's Diffusion Equation in One Dimension 3.2 Atomistic Models of Diffusion 3.3 Analytic Solutions of Fick's Law 3.4 Corrections to Simple Theory 3.5 Diffusion Coefficients for Common Dopants 3.6 Analysis of Diffused Profiles 3.7 Diffusion in SiO2 3.8 Diffusion Systems 3.9 SUPREM Simulations of Diffusion Profiles 3.10 Summary Problems References 4. Thermal Oxidation 4.1 The Deal-Grove Model of Oxidation 4.2 The Linear and Parabolic Rate Coeffients 4.3 The Initial Oxidation Regime 4.4 The Structure of SiO2 4.5 Oxide Characterization 4.6 The Effects of Dopants During Oxidation and Polysilicon Oxidation 4.7 Oxidation Induced Stacking Faults 4.8 Alternative Gate Insulations 4.9 Oxidation Sytems 4.10 SUPREM Oxidations 4.11 Summary Problems References 5. Ion Implantation 5.1 Idealized Ion Implantation Systems 5.2 Coulomb Scattering 5.3 Vertical Projected Range 5.4 Channeling and Lateral Projected Range 5.5 Implantation Damage 5.6 Shallow Junction Formation 5.7 Buried Dielectrics 5.8 Ion Implantation Systems -- Problems and Concerns 5.9 Implanted Profiles Using SUPREM+ 5.10 Summary Problems References 6. Rapid Thermal Processing 6.1 Gray Body Radiation, Heat Exchange, and Optical Absorption 6.2 High Density Optical Sources and Chamber Design 6.3 Temperature Measurement 6.4 Temperature Measurement 6.4 Thermoplastic Stress 6.5 Rapid Thermal Activation of Impurities 6.6 Rapid Thermal Processing of Dielectrics 6.7 Silicidation and Contact Formation 6.8 Alternative Rapid Thermal Processing Systems 6.9 Summary Problems References PART III: UNIT PROCESSES 2: PATTERN TRANSFER 7. Optical Lithography 7.1 Lithography Overview 7.2 Diffraction 7.3 The Modulation Transfer Function and Optical Exposures 7.4 Source Systems and Spatial Coherence 7.5 Contact/Proximity Printers 7.6 Projection Printers 7.7 Advanced Mask Concepts 7.8 Surface Reflections and Standing Waves 7.9 Alignment 7.10 Summary Problems References 8. Photoresists 8.1 Photoresist Types 8.2 Organic Materials and Polymers 8.3 Typical Reactions of DQN Positive Photoresist 8.4 Contrast Curves 8.5 The Critical Modulation Transfer Function 8.6 Applying and Developing Photoresist 8.7 Second Order Exposure Effects 8.8 Advanced Photoresists and Photoresist Processes 8.9 Summary Problems References 9. Nonoptical Lithographic Techniques 9.1 Interactions of High Energy Beams with Matter 9.2 Direct Write Electron Beam Lithography Systems 9.3 Direct Write Electron Beam Lithography Summary and Outlook 9.4 X-Ray Sources 9.5 Proximity X-Ray Exposure Systems 9.6 Membrane Masks 9.7 Projection X-Ray Lithography 9.8 Projection Electron Beam Lithography (SCALPEL) 9.9 E-bean and X-Ray Resists 9.10 Radiation Damage in MOS Devices 9.11 Summary Problems References PART IV: UNIT PROCESSES 3: THIN FILMS 10. Vacuum Science and Plasmas 10.1 The Kinetic Theory of Gasses 10.2 Gas Flow and Conductance 10.3 Pressure Ranges and Vacuum Pumps 10.4 Vacuum Seals and Pressure Measurement 10.5 The DC Glow Discharge 10.6 RF Discharges 10.7 High Density Plasmas 10.8 Summary Problems References 11. Etching 11.1 Wet Etching 11.2 Chemical Mechanical Publishing 11.3 Basic Regimes of Plasma Etching 11.4 High Pressure Plasma Etching 11.5 Ion Milling 11.6 Reactive Ion Etching 11.7 Damage in Reative Ion Etching 11.8 High Density Plasma (HDP) Etching 11.9 Liftoff 11.10 Summary Problems References 12. Physical Deposition: Evaporation and Sputtering 12.1 Phase Diagrams: Sublimation and Evaporation 12.2 Deposition Rates 12.3 Step Coverage 12.4 Evaporator Systems: Crucible Heating Techniques 12.5 Multicomponent Films 12.6 An Introduction to Sputtering 12.7 Physics of Sputtering 12.8 Deposition Rate: Sputter Yield 12.9 High Density Plasma Sputtering 12.10 Morphology and Step Coverage 12.11 Sputtering Methods 12.12 Sputtering of Specific Materials 12.13 Stress in Deposited Layers 12.14 Summary Problems References 13. Chemcial Vapor Deposition 13.1 A Simple CVD System for the Deposition of Silicon 13.2 Chemical Equilibrium and the Law of Mass Action 13.3 Gas Flow and Boundary Layers 13.4 Evaluation of the Simple CVD System 13.5 Atmospheric CVD of Dielectrics 13.6 Low Pressure CVD of Dielectrics and Semiconductors in Hot Wall Systems 13.7 Plasma Enhanced CVD of Dielectrics 13.8 Metal CVD + 13.9 Summary Problems References 14. Exiptaxial Growth 14.1 Water Cleaning and Native Oxide Removal 14.2 The Thermodynamics of Vapor Phase Growth 14.3 Surface Re

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.5860/choice.34-2177

Cites

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cited by

See all 646

Metadata

Venue
Choice Reviews Online
Published
1996-12-01
Volume
34
Issue
04
Pages
34-2177-34-2177
ISSN
  • 0009-4978 (ISSN-L)
  • 1523-8253
OpenAlex
W1581137768
Cited by
646
References
0
Type
book review
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: The science and engineering of microelectronic fabrication. https://app.cochat.ai/papers/10.5860/choice.34-2177
The paper
The science and engineering of microelectronic fabrication. (1996). Choice Reviews Online. https://doi.org/10.5860/choice.34-2177

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.