The DOI matches its OpenAlex record; 3 of the 3 references it cites were found in a registry or an index.
Experimental study of methylene blue adsorption from aqueous solutions onto carbon nano tubes
Open accessAbstract
In this work, batch adsorption experiments were carried out for the removal of methylene blue as a basic dye from aqueous solutions using carbon nanotubes (CNTs). The effects of major variables governing the efficiency of the process such as, temperature, initial dye concentration, CNTs dosage, and pH were investigated. Experimental results have shown that, the amount of dye adsorption increased with increasing the initial concentration of the dye, CNTs dosage, and temperature. The dye removal using 400 mg L-1 of CNTs was more than 90%. This dosage (400 mg L-1) was considered as the optimum dosage of CNTs to remove methylene blue. The adsorption kinetic data were analysed using pseudo-first-order, pseudo-second-order and Elovich models. It was found that the pseudo-secondorder kinetic model was the most appropriate model, describing the adsorption kinetics. Adsorption isotherm of methylene blue onto the CNTs was determined at 290, 300 and 310 K with 10 mg L-1 as initial concentration of methylene blue. Adsorption equilibrium was attained within 120 min. Equilibrium data were fitted to the Langmuir, Freundlich, Temkin and Sips isotherm models and isotherm constants were determined. The equilibrium data were best represented by the Sips isotherm model. Thermodynamic parameters such as changes in the free energy of adsorption (�G�), enthalpy (�H�) and
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Removal of dyes from aqueous solution using fly ash and red mud
Wang, S., Boyjoo, Y., Choueib, A., & Zhu, Z. H. (2005) · Water Research · doi:10.1016/j.watres.2004.09.011 · Cited by 924
Adsorption of reactive dye onto carbon nanotubes: Equilibrium, kinetics and thermodynamics
Wu, C.-H. (2007) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2006.09.083 · Cited by 582
A comparative study of dye removal using fly ash treated by different methods
Wang, S., Boyjoo, Y., & Choueib, A. (2005) · Chemosphere · doi:10.1016/j.chemosphere.2005.01.091 · Cited by 325
Cited by
Dawood, S., & Sen, T. K. (2012) · Water Research · doi:10.1016/j.watres.2012.01.009 · Cited by 852
Carbon based materials: a review of adsorbents for inorganic and organic compounds
Sabzehmeidani, M. M., Mahnaee, S., Ghaedi, M., Heidari, H., & Roy, V. A. L. (2021) · Materials Advances · doi:10.1039/d0ma00087f · Cited by 646
The role of nanomaterials as effective adsorbents and their applications in wastewater treatment
Sadegh, H., Ali, G. A. M., Gupta, V. K., Makhlouf, A. S. H., Shahryari-ghoshekandi, R., Nadagouda, M. N., Sillanpää, M., & Megiel, E. (2017) · Journal of Nanostructure in Chemistry · doi:10.1007/s40097-017-0219-4 · Cited by 639
Sen, T. K., Afroze, S., & Ang, H. M. (2011) · Water, Air, & Soil Pollution · doi:10.1007/s11270-010-0663-y · Cited by 468
Adsorption processes for the removal of contaminants from wastewater
Sahoo, T. R., & Prelot, B. (2020) · Nanomaterials for the Detection and Removal of Wastewater Pollutants · doi:10.1016/b978-0-12-818489-9.00007-4 · Cited by 416
Metadata
- Authors
- Shahryari, Z., Goharrizi, A. S., & Azadi, M.
- Venue
- International Journal of Water Resources and Environmental Engineering
- Publisher
- Academic Journals
- Published
- 2010-03-31
- Volume
- 2
- Issue
- 2
- Pages
- 16-28
- ISSN
- 2141-6613 (ISSN-L)
- OpenAlex
- W2142106474
- Cited by
- 183
- References
- 3
- FWCI
- 6.68
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.