The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Mechanical Milling: a Top Down Approach for the Synthesis of Nanomaterials and Nanocomposites
Open accessAbstract
Synthesis of nanomaterials by a simple, low cost and in high yield has been a great challenge since the very early development of nanoscience. Various bottom and top down approaches have been developed so far, for the commercial production of nanomaterials. Among all top down approaches, high energy ball milling, has been widely exploited for the synthesis of various nanomaterials, nanograins, nanoalloy, nanocomposites and nano -quasicrystalline materials. Mechanical alloying techniques have been utilized to produce amorphous and nanocrystalline alloys as well as metal/non-metal nanocomposite materials by milling and post annealing, of elemental or compound powders in an inert atmosphere. Mechanical alloying is a non-equilibrium processing technique in which different elemental powders are milled in an inert atmosphere to create one mixed powder with the same composition as the constituents. In high-energy ball milling, plastic deformation, cold-welding and fracture are predominant factors, in which the deformation leads to a change in particle shape, cold-welding leads to an increase in particle size and fracture leads to decrease in particle size resulting in the formation of fine dispersed alloying particles in the grain-refined soft matrix. By utilizing mechanical milling various kind of aluminium/ nickel/ magnesium/ copper based nanoalloys, wear resistant spray coatings, oxide and carbide strengthened aluminium alloys, and many other nanocomposites have been synthesized in very high yield. The mechanical milling has been utilized for the synthesis of nanomaterials either by milling and post annealing or by mechanical activation and then applying some other process on these activated materials. This review is a systematic view of the basic concept of mechanical milling, historical view and applications of mechanical milling in the synthesis of various nanomaterials, nanosomposites, nnaocarbons and nano quasicrystalline materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Magnetism and Magnetic Materials
Coey, J. M. D. (2001) · Cambridge University Press eBooks · doi:10.1017/9781108775052 · Cited by 3,178
Ссср, А. Н. (1939) · Medical Entomology and Zoology · Cited by 649
Powder metal technologies and applications
Eisen, W. B., Ferguson, B. L., German, R. M., Iacocca, R. G., Lee, P. W., Madan, D., Moyer, K. H., Sanderow, H. I., & Trudel, Y. (1998) · Medical Entomology and Zoology · Cited by 316
Material Science and Engineering
Upadhyaya, G. S. (2013) · Cited by 270
Cited by
Nanomaterials: a review of synthesis methods, properties, recent progress, and challenges
Baig, N., Kammakakam, I., & Falath, W. (2021) · Materials Advances · doi:10.1039/d0ma00807a · Cited by 3,262
Jamkhande, P. G., Ghule, N. W., Bamer, A. H., & Kalaskar, M. G. (2019) · Journal of Drug Delivery Science and Technology · doi:10.1016/j.jddst.2019.101174 · Cited by 1,666
A review on nanoparticles: characteristics, synthesis, applications, and challenges
Altammar, K. A. (2023) · Frontiers in Microbiology · doi:10.3389/fmicb.2023.1155622 · Cited by 1,067
A review on the classification, characterisation, synthesis of nanoparticles and their application
Anu Mary Ealia, S., & Saravanakumar, M. P. (2017) · IOP Conference Series: Materials Science and Engineering · doi:10.1088/1757-899x/263/3/032019 · Cited by 1,050
Nanofertilizer use for sustainable agriculture: Advantages and limitations
Zulfiqar, F., Navarro, M., Ashraf, M., Akram, N. A., & Munné-Bosch, S. (2019) · Plant Science · doi:10.1016/j.plantsci.2019.110270 · Cited by 839
Metadata
- Authors
- Prasad Yadav, T., Manohar Yadav, R., & Pratap Singh, D.
- Venue
- Nanoscience and Nanotechnology
- Publisher
- Scientific and Academic Publishing
- Published
- 2012-08-31
- Volume
- 2
- Issue
- 3
- Pages
- 22-48
- ISSN
- 2163-257X (ISSN-L)
- OpenAlex
- W2068677870
- Cited by
- 736
- References
- 4
- FWCI
- 22.54
- Type
- journal article
- Language
- en
- Open access
- diamond
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.