Relationship between Production Method and Adsorption Property of Char
Open accessThe DOI matches its Crossref record.
Abstract
Charcoals were prepared from Japanese cypress (C. obtusa) and Japanese oak (Q. mongolica) by threecarbonization methods, (a) in a nitrogen stream, (b) in an air stream, (c) in a container with cover. The relationshipbetween the carbonization methods and the adsorption properties of the charcoals was investigated and the followingresults were obtained.Regardless of the carbonization method or the kind of wood used, the surface of charcoals prepared at lowtemperature was acidic and that of charcoals prepared at high temperature basic. The surface of charcoals preparedby method (c) showed the highest acidity.When benzene, iodine and phenol were adsorbed for short periods onto charcoals prepared by methods (a) and (c), the charcoal prepared at 600°C had the largest mean pore size, and also showed the fastest adsorption rate and thehighest adsorption capacity. Of the charcoals prepared by method (b), the charcoal prepared at 900°C had the highestadsorption capacity. The charcoal prepared at 1000°C showed a decrease in adsorption capacity because of thermalshrinkage of the pores.For all methods, adsorption capacity for water vapor was lowest in the charcoal prepared at 600°C. However, the amount of water vapor desorbed when humidity decreased was highest in the charcoal prepared at 600°C It was found that the 600°C charcoal is the best for use in humidity-control.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Properties of dairy-manure-derived biochar pertinent to its potential use in remediation
Cao, X., & Harris, W. (2010) · Bioresource Technology · doi:10.1016/j.biortech.2010.02.052 · Cited by 1,173
Chen, X., Chen, G., Chen, L., Chen, Y., Lehmann, J., McBride, M. B., & Hay, A. G. (2011) · Bioresource Technology · doi:10.1016/j.biortech.2011.06.078 · Cited by 1,016
Control of pore structure in carbon
Kyotani, T. (2000) · Carbon · doi:10.1016/s0008-6223(99)00142-6 · Cited by 678
Xu, X., Cao, X., & Zhao, L. (2013) · Chemosphere · doi:10.1016/j.chemosphere.2013.03.009 · Cited by 526
Shinogi, Y., & Kanri, Y. (2003) · Bioresource Technology · doi:10.1016/s0960-8524(03)00147-0 · Cited by 271
Metadata
- Authors
- Abe, I., Iwasaki, S., Iwata, Y., Kominami, H., & Kera, Y.
- Venue
- TANSO
- Publisher
- The Carbon Society of Japan
- Published
- 1998
- Volume
- 1998
- Issue
- 185
- Pages
- 277-284
- ISSN
- 0371-5345 (ISSN-L)
- 1884-5495
- OpenAlex
- W2316758168
- Cited by
- 56
- References
- 0
- FWCI
- 0.68
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Relationship between Production Method and Adsorption Property of Char. https://app.cochat.ai/papers/10.7209/tanso.1998.277
- The paper
- Abe, I., Iwasaki, S., Iwata, Y., Kominami, H., & Kera, Y. (1998). Relationship between Production Method and Adsorption Property of Char. TANSO. https://doi.org/10.7209/tanso.1998.277
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.