Equilibrium and Kinetics Studies of adsorption of Copper (II) Ions on Natural Biosorbent
Open accessThe DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
The Biosorption of Copper (II) ions from aqueous solution on natural biosorbent (Mussels) has been investigated.Batch shaking adsorption experiments were performed and equilibrium and kinetic isotherms were tested.Results show that Chitin can remove Copper (II) effectively from aqueous solution.To predict the adsorption isotherms and to determine the characteristic parameters for process design, eight isotherm models: Langmuir, Freundlich, Elovich, Temkin, Fowler-Guggenheim, Jovanovic, Koble-Corrigan, and Hill were applied to experimental data.The equilibrium data were analyzed.The results reveal that the adsorption isotherm models fitted the data in the order: Jovanovic > Freundlich , Koble-Corrigan> Temkin> Fowler-Guggenheim> Elovich> Langmuir, Hill.Adsorption kinetic data were tested using pseudo-first order, pseudo-second order and Elovich model.The kinetics of the adsorption were found to fit the Elovich model.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Insights into the modeling of adsorption isotherm systems
Foo, K. Y., & Hameed, B. H. (2010) · Chemical Engineering Journal · doi:10.1016/j.cej.2009.09.013 · Cited by 8,479 · cited 2×
“1) Hill isotherm Hill model [22], assumes that adsorption process as a cooperative phenomenon, with the ligand binding ability at one site on the macromolecule, may influence the different binding sites on the same macromolecule.”
BackgroundMethodA review of chitin and chitosan applications
Ravi Kumar, M. N. V. (2000) · Reactive and Functional Polymers · doi:10.1016/s1381-5148(00)00038-9 · Cited by 6,009
Cited by
Thomas, P., Lai, C. W., & Bin Johan, M. R. (2019) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2019.03.021 · Cited by 207
FELIX, N., IENNA, N., IKELLE, İ., ANSELM, O., NWABUEZE, E., EMEKA, İ., & CLİNTON, O. (2018) · Journal of the Turkish Chemical Society Section A: Chemistry · doi:10.18596/jotcsa.438332 · Cited by 19
“Where Co is the initial concentration of zinc (II) ion and the values of b was found to be between 0 and I indicating the favorability of the adsorption process (23).”
InfluentialKarim, M. A., Najibullah, M., Ahmed, S., Dipti, S. S., & Salam, S. M. A. (2025) · Biomass Conversion and Biorefinery · doi:10.1007/s13399-024-05986-4 · Cited by 8
Nworie, F., Oroke, E., Ikelle, II, & Nworu, J. (2020) · Acta Chemica Malaysia · doi:10.2478/acmy-2020-0002 · Cited by 8
“The equation defining the model is based on a kinetic principle which assumes that the adsorption sites increase exponentially with adsorption, which implying a multilayer adsorption [12].”
Background
Metadata
- Authors
- Petrochemical Department, F. O. E., Farouq, R., & Yousef, N. S.
- Venue
- International Journal of Chemical Engineering and Applications
- Publisher
- EJournal Publishing
- Published
- 2015-10
- Volume
- 6
- Issue
- 5
- Pages
- 319-324
- ISSN
- 2010-0221 (ISSN-L)
- OpenAlex
- W4233079835
- Cited by
- 107
- References
- 2
- FWCI
- 2.19
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Equilibrium and Kinetics Studies of adsorption of Copper (II) Ions on Natural Biosorbent. https://app.cochat.ai/papers/10.7763/ijcea.2015.v6.503
- The paper
- Petrochemical Department, F. O. E., Farouq, R., & Yousef, N. S. (2015). Equilibrium and Kinetics Studies of adsorption of Copper (II) Ions on Natural Biosorbent. International Journal of Chemical Engineering and Applications. https://doi.org/10.7763/ijcea.2015.v6.503
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.