CoChat
Sign Up
Cited by 24Advanced machining processes and optimizationEngineering Technology and MethodologiesMetal Alloys Wear and Properties

The DOI matches its Crossref record.

Analysis of Cutting Tools Durability Compared with Standard ISO 3685

Open access
Panda, Anton, Duplák, Ján, Vasilko, Karol·2012·International Journal of Computer Theory and Engineering
DOI 10.7763/ijcte.2012.v4.544
Open this paper in CoChat — free accountOpen PDF

Abstract

Quality and accuracy in engineering is described by means of standards ISO.One of these standards is standard ISO 3685.The main part of this standard is T-v c dependence for various cutting materials.Standard ISO 3685 contains main properties and characteristics of three most important cutting materials those are used in engineering practice.These cutting materials are used for cutting tools made of high speed steel, cutting ceramic and sintered carbide.The standard ISO 3685 prescribes instructions to creation of T-v c dependence for defined cutting materials.Paper describes process how to define T-v c dependence for cutting tools made of high speed steel, cutting ceramic and sintered carbide, because were found deficiencies in valid standard ISO 3685.

Overview

Integrity signals

Registry

Crossref · 10.7763/ijcte.2012.v4.544

Cites

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

We couldn’t retrieve this paper’s full text, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Citations

Cites

No references could be resolved yet.

Research works printed but not linked: 16

  1. 10.1007/978-1-4020-6239-1_37 · DOI
  2. [2] L. Straka, S. Fabian, and S. Hloch, "The modeling and simulation of quality in process EDM cutting with wire electrode," in Proceedings of the 5th International Conference of DAAAM Baltic, Tallinn, Estonia, University of Technology Tallinn, 20 - 22 April 2006, pp. 167-170.
  3. [4] J. Mačala and I. Pandová, "Natural zeolite-clinoptilolite - raw material serviceable in the reduction of toxical components at combustion engines noxious gases," Gospodarka Surowcami Mineralnymi, vol. 23, no. 4, pp. 19-25, 2007.
  4. [5] I. Pandová, L. Knapčíková, and P. Oravec, "Recycling of mix plastic waste from wrecks a cars," Studia i Materialy, vol. 26-29, no. 1-2, pp. 53-58, 2010.
  5. [7] J. R. Davis, Materials. ASM Specialty Handbook, ASM International, Materials Park, Ohio, pp. 501, 1998.
  6. [8] Y. A. Helmi and H. El-Hofy, Machining Technology-Machine Tools and Operations, CRC Press, pp. 398, 2008.
  7. [9] J. T. Black and R. A. Kohser, Degarmo's Materials & Processes in Manufacturing, Wiley India Private Limited, pp. 1032, 2007.
  8. [13] M. C. Shaw, Metal Cutting Principles, Oxford University Press, pp. 651, 2005.
  9. [15] K. Vasilko, Theory and Practise of Splinter Machining, Prešov FVT, pp. 546, 2009.
  10. [16] T. Gondová, I. Pandová, S. Tkáčiková, and P. Oravec, "Možnosti aplikácie prírodného zeolitu-klinoptilolitu na adsorpciu toxických zložiek výfukových plynov," Chemické Listy, vol. 97, no. 8, pp. 820, 2003.
  11. [3] L. Straka, M. Rimár, I. Čorný, and J. MIHALČOVÁ, "Increasing of Operational Reliability of Technical System", in proc. DAAAM 2011, DAAAM International Vienna, 2011, pp.1089–1090. · DOI
  12. [6] E. Isakov, Cutting Data for turning of steel, Industrial Press, Inc. 989 Avenue of the Americas New York, NY 10018, pp. 316, 2009.
  13. [10] B. S. P. Nagendra and R. K. Mittal, Elements of Manu facturing Proces, Prentice-Hall of India Private Limited, pp. 496, 2006.
  14. [11] H. Tschätsch, Applied Machining Technology, Original German edition published by Vieweg, Wiesbaden, pp. 398, 2007.
  15. [12] E. D. Whitney, Ceramic Cutting Tools, William Andrew Publishing/Noyes, pp. 353, 1994.
  16. [14] J. Duplák, Identification of Comprehensive T-vc Dependence, Diploma Thesis, Prešov FVT, pp. 106, 2010

Cited by

Sorted by citations

See all 24

Metadata

Authors
Panda, A., Duplák, J., & Vasilko, K.
ORCID
Venue
International Journal of Computer Theory and Engineering
Publisher
IACSIT Press
Published
2012
Pages
621-624
ISSN
1793-8201 (ISSN-L)
DOI
10.7763/ijcte.2012.v4.544
OpenAlex
W2329936176
Cited by
24
References
0
Citations by year
2024: 1 · 2023: 3 · 2022: 1 · 2021: 1 · 2020: 1 · 2019: 3 · 2018: 2 · 2017: 2 · 2016: 1 · 2015: 4 · 2014: 5
FWCI
4.40
Type
journal article
Language
en
Open access
Locations
International Journal of Computer Theory and Engineering (publishedVersion)
Funders
Vedecká Grantová Agentúra MŠVVaŠ SR a SAV
Topics
  • Physical Sciences › Engineering › Mechanical Engineering › Advanced machining processes and optimization
  • Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Engineering Technology and Methodologies
  • Physical Sciences › Materials Science › Metals and Alloys › Metal Alloys Wear and Properties
Keywords
cutting tool durability, tool life, cutting speed, high-speed steel, cutting ceramics, sintered carbides, cutting materials, tool wear

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Analysis of Cutting Tools Durability Compared with Standard ISO 3685. https://app.cochat.ai/papers/10.7763/ijcte.2012.v4.544
The paper
Panda, A., Duplák, J., & Vasilko, K. (2012). Analysis of Cutting Tools Durability Compared with Standard ISO 3685. International Journal of Computer Theory and Engineering. https://doi.org/10.7763/ijcte.2012.v4.544