Cited by 7,158Advanced Polymer Synthesis and CharacterizationPolymer Synthesis and Characterizationbiodegradable polymer synthesis and properties

The DOI matches its Crossref record.

Principles of Polymerization

Odian, George·2004·Wiley eBooks

DOI 10.1002/047147875x

Open this paper in CoChat — free account

Abstract

Preface. 1. Introduction. 1.1 Types of Polymers and Polymerizations. 1.2 Nomenclature of Polymers. 1.3 Linear, Branched, and Crosslinked Polymers. 1.4 Molecular Weight. 1.5 Physical State. 1.6 Applications of Polymers. 2. Step Polymerization. 2.1 Reactivity of Functional Groups. 2.2 Kinetics of Step Polymerization. 2.3 Accessibility of Functional Groups. 2.4 Equilibrium Considerations. 2.5 Cyclization versus Linear Polymerization. 2.6 Molecular Weight Control in Linear Polymerization. 2.7 Molecular Weight Distribution in Linear Polymerization. 2.8 Process Condition. 2.9 Multichain Polymerization. 2.10 Crosslinking. 2.11 Molecular Weight Distributions in Nonlinear Polymerizations. 2.12 Crosslinking Technology. 2.13 Step Copolymerization. 2.14 High-Performance Polymers. 2.15 Inorganic and Organometallic Polymers. 2.16 Dendric (Highly Branched) Polymers. 3. Radical Chain Polymerization. 3.1 Nature and Radical Chain Polymerization. 3.2 Structural Arrangement of Monomer Units. 3.3 Rate of Radical Chain Polymerization. 3.4 Initiation. 3.5 Molecular Weight. 3.6 Chain Transfer. 3.7 Inhibition and Retardation. 3.8 Determination of Absolute Rate Constants. 3.9 Energetic Characteristics. 3.10 Autoacceleration. 3.11 Molecular Weight Distribution. 3.12 Effect of Pressure. 3.13 Process Conditions. 3.14 Specific Commercial Polymers. 3.15 Living Radical Polymerization. 3.16 Other Polymerizations. 4. Emulsion Polymerization. 4.1 Description of Process. 4.2 Quantitative Aspects. 4.3 Other Characteristics of Emulsion Polymerization. 5. Ionic Chain Polymerization. 5.1 Comparison of Radical and Ionic Polymerization. 5.2 Cationic Polymerization of the Carbon-Carbon Double Bond. 5.3 Anionic Polymerization of the Carbon-Carbon Double. 5.4 Block and Other Polymer Architecture. 5.5 Distinguishing Between Radical, Cationic, and Anionic Polymerizations. 5.6 Carbonyl Polymerization. 5.7 Miscellaneous Polymerizations. 6. Chain Copolymerization. 6.1 General Considerations. 6.2 Copolymer Composition. 6.3 Radical Copolymerization. 6.4 Ionic Copolymerization. 6.5 Deviations from Terminal Copolymerization Model. 6.6 Copolymerizations Involving Dienes. 6.7 Other Copolymerizations. 6.8 Applications of Copolymerizations. 7. Ring-Opening Polymerization. 7.1 General Characteristics. 7.2 Cyclic Ethers. 7.3 Lactams. 7.4 N-Carboxy-alphaAmino Acid Anhydrides. 7.5 Lactones. 7.6 Nitrogen Heterocyclics. 7.7 Sulfur Heterocyclics. 7.8 Cycloalkenes. 7.9 Miscellaneous Oxygen Heterocyclics. 7.10 Other Ring-Opening Polymerizations. 7.11 Inorganic and Partially Inorganic Polymers. 7.12 Copolymerization. 8. Stereochemistry of Polymerizaton. 8.1 Types of Stereoisomerism in Polymers. 8.2 Properties of Stereoregular Polymers. 8.3 Forces of Stereoregulation in Alkene Polymerization. 8.4 Traditional Ziegler-Natta Polymerization of Nonpolar Alkene Monomers. 8.5 Metallocene Polymerization of Nonpolar Alkene Monomers. 8.6 Other Hydrocarbon Monomers. 8.7 Copolymerization. 8.8 Postmetallocene: Chelate Initiators. 8.9 Living Polymerization. 8.10 Polymerization of 1,3-Dienes. 8.11 Commercial Applications. 8.12 Polymerization of Polar Vinyl Monomers. 8.13 Alehydes. 8.14 Optical Activity in Polymers. 8.15 Ring-Opening Polymerization. 8.16 Statistical Models of Propagation. 9. Reactions of Polymers. 9.1 Principles of Polymers Reactivity. 9.2 Crosslinking. 9.3 Reactions of Cellulose. 9.4 Reactions of Poly(vinyl) acetate). 9.5 Halogenation. 9.6 Aromatic Substitution. 9.7 Cyclization. 9.8 Other Reactions. 9.9 Graft Copolymers. 9.10 Block Copolymers. 9.11 Polymers as Carriers or Supports. 9.12 Polymer Reagents. 9.13 Polymer Catalysts. 9.14 Polymer Substrates. Index.

Integrity signals

Registry

Crossref · 10.1002/047147875x

Cites

Statistics

Recomputing p-values needs the paper’s full text.

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Sorted by citations

Items 301–400 of 1,007

Initiated Chemical Vapor Deposition of Poly(1H,1H,2H,2H-perfluorodecyl Acrylate) Thin Films
Gupta, M., & Gleason, K. K. (2006) · Langmuir · doi:10.1021/la061904m · Cited by 159
Preparation and Study of Polyacryamide-Stabilized Silver Nanoparticles through a One-Pot Process
Chen, M., Wang, L., Han, J., Zhang, J., Li, Z.-Y., & Qian, D. (2006) · The Journal of Physical Chemistry B · doi:10.1021/jp061134n · Cited by 159
Lipase-Catalyzed Polycondensations: Effect of Substrates and Solvent on Chain Formation, Dispersity, and End-Group Structure
Mahapatro, A., Kalra, B., Kumar, A., & Gross, R. A. (2003) · Biomacromolecules · doi:10.1021/bm0257208 · Cited by 159
Enantioselective Epoxide Polymerization Using a Bimetallic Cobalt Catalyst
Thomas, R. M., Widger, P. C. B., Ahmed, S., Jeske, R. C., Hirahata, W., Lobkovsky, E. B., & Coates, G. W. (2010) · Journal of the American Chemical Society · doi:10.1021/ja1058422 · Cited by 158
Synthesis of polylactic acid by direct polycondensation under vacuum without catalysts, solvents and initiators
Achmad, F., Yamane, K., Shi, Q., & Kokugan, T. (2009) · Chemical Engineering Journal · doi:10.1016/j.cej.2009.04.014 · Cited by 166
Retardation effect of PCE superplasticizers with different architectures and their impacts on early strength of cement mortar
Zhang, L., Miao, X., Kong, X., et al. (2019) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2019.103369 · Cited by 157
Interpenetrating polymer networks: So happy together?
Silverstein, M. S. (2020) · Polymer · doi:10.1016/j.polymer.2020.122929 · Cited by 162
Dramatic Enhancement of Superacid-Catalyzed Polyhydroxyalkylation Reactions
Guzmán-Gutiérrez, M. T., Nieto, D. R., Fomine, S. M., et al. (2010) · Macromolecules · doi:10.1021/ma102267f · Cited by 156
Copolymerization of CO 2 and meso epoxides using enantioselective β-diiminate catalysts: a route to highly isotactic polycarbonates
Ellis, W. C., Jung, Y., Mulzer, M., Girolamo, R. D., Lobkovsky, E. B., & Coates, G. W. (2014) · Chemical Science · doi:10.1039/c4sc01686f · Cited by 155
Chemical Oxidative Polymerization of Polyaniline: A Practical Approach for Preparation of Smart Conductive Textiles
Abu-Thabit, N. Y. (2016) · Journal of Chemical Education · doi:10.1021/acs.jchemed.6b00060 · Cited by 155
Molecular Engineering of Conjugated Polymers for Solar Cells: An Updated Report
Xiao, S., Zhang, Q., & You, W. (2016) · Advanced Materials · doi:10.1002/adma.201601391 · Cited by 156
Controlled Surface Wettability by Plasma Polymer Surface Modification
Iqbal, M., Dinh, D. K., Abbas, Q., Imran, M., Sattar, H., & Ahmad, A. U. (2019) · Surfaces · doi:10.3390/surfaces2020026 · Cited by 161
Thermal behavior and specific interaction in high glass transition temperature PMMA copolymer
Kuo, S., Kao, H.-C., & Chang, F. (2003) · Polymer · doi:10.1016/j.polymer.2003.08.026 · Cited by 156
“8% of tetrads (0:8% 1⁄4 P(3)11 £ P12 £ 100% and so on) [26], indicating that the MAAM monomer usually ends up in an isolated single MAAM sequence ðM1Þ in the PMAAM-co-PMMA copolymer.”
Background
Diffusion kinetics of formation of holographic polymer-dispersed liquid crystal display materials
Bowley, C. C., & Crawford, G. P. (2000) · Applied Physics Letters · doi:10.1063/1.126306 · Cited by 156
Initiated and oxidative chemical vapor deposition: a scalable method for conformal and functional polymer films on real substrates
Baxamusa, S. H., Im, S. G., & Gleason, K. K. (2009) · Physical Chemistry Chemical Physics · doi:10.1039/b900455f · Cited by 156
Polylactic Acid in Medicine
Davachi, S. M., & Kaffashi, B. (2015) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602559.2014.979507 · Cited by 156
Preparation and Properties of Novel Slow-Release NPK Agrochemical Formulations Based on Poly(acrylic acid) Hydrogels and Liquid Fertilizers
Teodorescu, M., Lungu, A., & Stãnescu, P. O. (2009) · Industrial & Engineering Chemistry Research · doi:10.1021/ie900254b · Cited by 155
The influences of the material properties on ceramic micro-stereolithography
Sun, C., & Zhang, X. (2002) · Sensors and Actuators A Physical · doi:10.1016/s0924-4247(02)00264-9 · Cited by 155
“A set of differential equations are used to describe the photo-polymerization processes [17] In additional to the standard mSL setup, a precision blade has been implemented to define a flat thin layer of the viscous ceramic resin.”
Method
Introduction of Fibre-Reinforced Polymers − Polymers and Composites: Concepts, Properties and Processes
Alberto, M. (2013) · InTech eBooks · doi:10.5772/54629 · Cited by 154
Synthetic Methods in Step‐Growth Polymers
de la Campa, J. G. (2004) · Macromolecular Chemistry and Physics · doi:10.1002/macp.200490012 · Cited by 155
Alternating Copolymerization of Propylene Oxide with Biorenewable Terpene‐Based Cyclic Anhydrides: A Sustainable Route to Aliphatic Polyesters with High Glass Transition Temperatures
Zee, N. J. V., & Coates, G. W. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201410641 · Cited by 157
Monitoring the Cure State of Thermosetting Resins by Ultrasound
Lionetto, F., & Maffezzoli, A. (2013) · Materials · doi:10.3390/ma6093783 · Cited by 148
Control of polymerization shrinkage and stress in nanogel-modified monomer and composite materials
Moraes, R. R., Garcia, J. W., Barros, M. D., et al. (2011) · Dental Materials · doi:10.1016/j.dental.2011.01.006 · Cited by 153
Ring-opening polymerization of lactams. Living anionic polymerization and its applications
Hashimoto, K. (2000) · Progress in Polymer Science · doi:10.1016/s0079-6700(00)00018-6 · Cited by 153
Polymer Properties and Characterization
Brady, J., Durig, T., Lee, P. I., & Li, J.-X. (2017) · Elsevier eBooks · doi:10.1016/b978-0-12-802447-8.00007-8 · Cited by 179
Chain-growth control in free radical polymerization
Colombani, D. (1997) · Progress in Polymer Science · doi:10.1016/s0079-6700(97)00022-1 · Cited by 161
Kilogram scale inverse vulcanization of elemental sulfur to prepare high capacity polymer electrodes for Li‐S batteries
Griebel, J. J., Li, G., Glass, R. S., et al. (2014) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.27314 · Cited by 152
Zwitterionic copolymer self-assembly for fouling resistant, high flux membranes with size-based small molecule selectivity
Bengani-Lutz, P., Kou, Y., & Asatekin, A. (2015) · Journal of Membrane Science · doi:10.1016/j.memsci.2015.07.025 · Cited by 151
Hydrophobicity as a design criterion for polymer scaffolds in bone tissue engineering
Jansen, E. J. P., Sladek, R. R., Bahar, H., Yaffe, A., Gijbels, M. J., Kuijer, R., Bulstra, S. K., Guldemond, N., Binderman, I., & Koole, L. H. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.11.011 · Cited by 149
Thermomechanical Behavior of Wheat Gluten Films: Effect of Sucrose, Glycerin, and Sorbitol
Cherian, G., Gennadios, A., Weller, C. L., et al. (1995) · Lincoln (University of Nebraska) · Cited by 152
Particle nucleation and monomer partitioning in styrene O/W microemulsion polymerization
Guo, J., Sudol, E. D., Vanderhoff, J. W., et al. (1992) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.1992.080300501 · Cited by 152
A Strategy for Control of “Random” Copolymerization of Lactide and Glycolide: Application to Synthesis of PEG-b-PLGA Block Polymers Having Narrow Dispersity
Qian, H., Wohl, A. R., Crow, J. T., Macosko, C. W., & Hoye, T. R. (2011) · Macromolecules · doi:10.1021/ma201169z · Cited by 151
Two-Photon Absorbing Materials and Two-Photon-Induced Chemistry
Rumi, M., Barlow, S. H., Wang, J., Perry, J. W., & Marder, S. R. (2008) · Springer eBooks · doi:10.1007/12_2008_133 · Cited by 155
“In contrast, for the case of one-photon initiation, the initiation rate is [178]:”
BackgroundMethod
Synthesis, characterization, and swelling behavior of alginate‐g‐poly(sodium acrylate)/kaolin superabsorbent hydrogel composites
Pourjavadi, A., Ghasemzadeh, H., & Soleyman, R. (2007) · Journal of Applied Polymer Science · doi:10.1002/app.26345 · Cited by 150
Non-Degradable Biocompatible Polymers in Medicine: Past, Present and Future
Shastri, V. P. (2003) · Current Pharmaceutical Biotechnology · doi:10.2174/1389201033489694 · Cited by 150
“The property of polymers is dictated by the nature of the chemical bonds that make up the polymer backbone, which is a function of the chemistry of the building blocks, namely the monomer unit and the linkages between the monomers [1].”
Background
Design, Synthesis, and Self-Assembly of Polymers with Tailored Graft Distributions
Chang, A. B., Lin, T., Thompson, N. B., Luo, S. L., Liberman‐Martin, A. L., Chen, H., Lee, B., & Grubbs, R. H. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b10525 · Cited by 152
Emulsion-templated polymers: Contemporary contemplations
Silverstein, M. S. (2017) · Polymer · doi:10.1016/j.polymer.2017.07.046 · Cited by 154
Rheology and Photo-Cross-Linking of Thiol−Ene Polymers
Chiou, B., English, R. J., & Khan, S. A. (1996) · Macromolecules · doi:10.1021/ma960383e · Cited by 148
Polymers from sugars: cyclic monomer synthesis, ring-opening polymerisation, material properties and applications
Gregory, G. L., López‐Vidal, E. M., & Buchard, A. (2017) · Chemical Communications · doi:10.1039/c6cc09578j · Cited by 147
Non-biodegradable polymeric waste pyrolysis for energy recovery
Dwivedi, P., Mishra, P. K., Mondal, M. K., & Srivastava, N. (2019) · Heliyon · doi:10.1016/j.heliyon.2019.e02198 · Cited by 146
Characterization of dimethacrylate polymeric networks: A study of the crosslinked structure formed by monomers used in dental composites
Pfeifer, C. S., Shelton, Z. R., Braga, R. R., Windmöller, D., Machado, J. C., & Stansbury, J. W. (2010) · European Polymer Journal · doi:10.1016/j.eurpolymj.2010.11.007 · Cited by 144
Enzymatic synthesis of a sucrose‐containing linear polyester in nearly anhydrous organic media
Patil, D. R., Rethwisch, D. G., & Dordick, J. S. (1991) · Biotechnology and Bioengineering · doi:10.1002/bit.260370706 · Cited by 147
Simple and Accurate Determination of Reactivity Ratios Using a Nonterminal Model of Chain Copolymerization
Beckingham, B. S., Sanoja, G. E., & Lynd, N. A. (2015) · Macromolecules · doi:10.1021/acs.macromol.5b01631 · Cited by 146
Review on the Degradation of Poly(lactic acid) during Melt Processing
Velghe, I., Buffel, B., Vandeginste, V., Thielemans, W., & Desplentere, F. (2023) · Polymers · doi:10.3390/polym15092047 · Cited by 146
Microwave assisted synthesis of polyacrylamide grafted gum ghatti and its application as flocculant
Rani, P., Sen, G., Mishra, S. K., et al. (2012) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2012.03.009 · Cited by 146
Sustainable Chemistry Metrics
Calvo‐Flores, F. G. (2009) · ChemSusChem · doi:10.1002/cssc.200900128 · Cited by 152
Polymerization of multiallyl monomers
Matsumoto, A. (2001) · Progress in Polymer Science · doi:10.1016/s0079-6700(00)00039-3 · Cited by 146
Accurate ab initio prediction of propagation rate coefficients in free-radical polymerization: Acrylonitrile and vinyl chloride
Izgorodina, E. I., & Coote, M. L. (2005) · Chemical Physics · doi:10.1016/j.chemphys.2005.09.042 · Cited by 146
Functionalized Poly(α-hydroxy acid)s via Ring-Opening Polymerization: Toward Hydrophilic Polyesters with Pendant Hydroxyl Groups
Leemhuis, M., van Nostrum, C. F., Kruijtzer, J. A. W., Zhong, Z., ten Breteler, M. R., Dijkstra, P. J., Feijen, J., & Hennink, W. E. (2006) · Macromolecules · doi:10.1021/ma052128c · Cited by 149
Low shrinkage light curable nanocomposite for dental restorative material
Chen, M., Chen, C.-R., Hsu, S.-H., Sun, S.-P., & Su, W. (2005) · Dental Materials · doi:10.1016/j.dental.2005.02.012 · Cited by 144
Impact of Copolymer Sequence on Solid-State Properties for Random, Gradient and Block Copolymers containing Thiophene and Selenophene
Palermo, E. F., & McNeil, A. J. (2012) · Macromolecules · doi:10.1021/ma301135n · Cited by 145
Muconic acid isomers as platform chemicals and monomers in the biobased economy
Khalil, I., Quintens, G., Junkers, T., & Dusselier, M. (2020) · Green Chemistry · doi:10.1039/c9gc04161c · Cited by 150
Synthesis and Microcontact Printing of Dual End‐Functionalized Mucin‐like Glycopolymers for Microarray Applications
Godula, K., Rabuka, D., Nam, K. T., & Bertozzi, C. R. (2009) · Angewandte Chemie International Edition · doi:10.1002/anie.200805756 · Cited by 144
Biotechnological synthesis of long‐chain dicarboxylic acids as building blocks for polymers
Huf, S., Krügener, S., Hirth, T., Rupp, S., & Zibek, S. (2011) · European Journal of Lipid Science and Technology · doi:10.1002/ejlt.201000112 · Cited by 141
Curing efficiency of dental resin composites formulated with camphorquinone or trimethylbenzoyl-diphenyl-phosphine oxide
Schneider, L. F. J., Cavalcante, L. M. A., Prahl, S. A., et al. (2011) · Dental Materials · doi:10.1016/j.dental.2011.11.014 · Cited by 143
The emergence of oxime click chemistry and its utility in polymer science
Collins, J., Xiao, Z., Müllner, M., & Connal, L. A. (2016) · Polymer Chemistry · doi:10.1039/c6py00635c · Cited by 146
Two-photon laser precision microfabrication and its applications to micro-nano devices and systems
Sun, H., & Kawata, S. (2003) · Journal of Lightwave Technology · doi:10.1109/jlt.2003.809564 · Cited by 145
Thermodynamics of random copolymer melts
Fredrickson, G. H., & Milner, S. T. (1991) · Physical Review Letters · doi:10.1103/physrevlett.67.835 · Cited by 140
High Performance Fibers Based on Rigid and Flexible Polymers
Afshari, M., Sikkema, D. J., Lee, K., et al. (2008) · Journal of macromolecular science. Part C, Reviews in macromolecular chemistry and physics/Journal of macromolecular science. Reviews in macromolecular chemistry and physics · doi:10.1080/15583720802020129 · Cited by 142
Photoassisted Radical Depolymerization
Young, J. B., Bowman, J. I., Eades, C. B., et al. (2022) · ACS Macro Letters · doi:10.1021/acsmacrolett.2c00603 · Cited by 142
Oxygen inhibition and incremental layer bond strengths of resin composites
Shawkat, E. S., Shortall, A. C. C., Addison, O., et al. (2009) · Dental Materials · doi:10.1016/j.dental.2009.06.003 · Cited by 142
Enhanced Adhesion and Cohesion of Bioinspired Dry/Wet Pressure-Sensitive Adhesives
Tiu, B. D. B., Delparastan, P., Ney, M. R., Gerst, M., & Messersmith, P. B. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b08429 · Cited by 144
Applications of 1,1-Diphenylethylene Chemistry in Anionic Synthesis of Polymers with Controlled Structures
Quirk, R. P., Yoo, T., Lee, Y., Kim, J., & Lee, B. (2007) · Advances in Polymer Science · doi:10.1007/3-540-46414-x_3 · Cited by 141
Compatibilization of PBT/ABS blends by methyl methacrylate-glycidyl methacrylate-ethyl acrylate terpolymers
Hale, W., Keskkula, H., & Paul, D. R. (1999) · Polymer · doi:10.1016/s0032-3861(98)00189-x · Cited by 129
Chitosan grafted/cross-linked with biodegradable polymers: A review
Sanchez-Salvador, J. L., Balea, A., Monte, M. C., Negro, C., & Blanco, Á. (2021) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2021.02.200 · Cited by 140
Thermally processed keratin films
Barone, J. R., Schmidt, W., & Liebner, C. F. E. (2005) · Journal of Applied Polymer Science · doi:10.1002/app.21901 · Cited by 139
End Group Characterization of Poly(phthalaldehyde): Surprising Discovery of a Reversible, Cationic Macrocyclization Mechanism
Kaitz, J. A., Diesendruck, C. E., & Moore, J. S. (2013) · Journal of the American Chemical Society · doi:10.1021/ja405628g · Cited by 139
Recent advances in alternating copolymers: The synthesis, modification, and applications of precision polymers
Huang, J., & Turner, S. R. (2017) · Polymer · doi:10.1016/j.polymer.2017.01.020 · Cited by 138
A minimal amount of acrylonitrile turns the nitroxide‐mediated polymerization of methyl methacrylate into an almost ideal controlled/living system
Nicolas, J., Brusseau, S., & Charleux, B. (2009) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.23749 · Cited by 138
The Living ROMP of trans -Cyclooctene
Walker, R., Conrad, R. M., & Grubbs, R. H. (2009) · Macromolecules · doi:10.1021/ma801693q · Cited by 142
Systematic optimization of visible light-induced crosslinking conditions of gelatin methacryloyl (GelMA)
Sharifi, R., Sharifi, H., Akbari, A., & Chodosh, J. (2021) · Scientific Reports · doi:10.1038/s41598-021-02830-x · Cited by 142
ICTAC Kinetics Committee recommendations for analysis of thermal polymerization kinetics
Vyazovkin, S., Achilias, D. S., Fernández‐Francos, X., Galukhin, A., & Sbirrazzuoli, N. (2022) · Thermochimica Acta · doi:10.1016/j.tca.2022.179243 · Cited by 140
Zwitterion-containing polymer additives for fouling resistant ultrafiltration membranes
Kaner, P., Rubakh, E., Kim, D. H., & Asatekin, A. (2017) · Journal of Membrane Science · doi:10.1016/j.memsci.2017.03.034 · Cited by 135
Single-Electron Transfer Living Radical Polymerization Platform to Practice, Develop, and Invent
Lligadas, G., Grama, S., & Percec, V. (2017) · Biomacromolecules · doi:10.1021/acs.biomac.7b01131 · Cited by 138
Bicontinuous Electrolytes via Thermally Initiated Polymerization for Structural Lithium Ion Batteries
Schneider, L. M., Ihrner, N., Zenkert, D., et al. (2019) · ACS Applied Energy Materials · doi:10.1021/acsaem.9b00563 · Cited by 137
Covalent organic frameworks: Polymer chemistry and functional design
Geng, K., Arumugam, V., Xu, H., Gao, Y., & Jiang, D. (2020) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2020.101288 · Cited by 137
The effect of light intensity on double bond conversion and flexural strength of a model, unfilled dental resin
Lovell, L. G., Newman, S. M., Donaldson, M. M., et al. (2003) · Dental Materials · doi:10.1016/s0109-5641(02)00090-8 · Cited by 137
Catalyst Regeneration in Transition‐Metal‐Mediated Atom‐Transfer Radical Addition (ATRA) and Cyclization (ATRC) Reactions
Pintauer, T. (2010) · European Journal of Inorganic Chemistry · doi:10.1002/ejic.201000234 · Cited by 136
Living Polymerization of α-Olefins at Elevated Temperatures Catalyzed by a Highly Active and Robust Cyclophane-Based Nickel Catalyst
Camacho, D. H., & Guan, Z. (2005) · Macromolecules · doi:10.1021/ma050039u · Cited by 136
Opportunities for organocatalysis in polymer synthesis via step-growth methods
Bossion, A., Heifferon, K. V., Meabe, L., Zivic, N., Taton, D., Hedrick, J. L., Long, T. E., & Sardón, H. (2018) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.11.003 · Cited by 141
Polyester polyols from glycolyzed PET waste: Effect of glycol type on kinetics of polyesterification
Vaidya, U. R., & Nadkarni, V. M. (1989) · Journal of Applied Polymer Science · doi:10.1002/app.1989.070380615 · Cited by 136
Water‐soluble polymers and gels from the polycondensation between cyclodextrins and poly(carboxylic acid)s: A study of the preparation parameters
Martel, B., Ruffin, D., Weltrowski, M., Lekchiri, Y., & Morcellet, M. (2005) · Journal of Applied Polymer Science · doi:10.1002/app.21391 · Cited by 150
Length control of supramolecular polymeric nanofibers based on stacked planar platinum( ii ) complexes by seeded-growth
Robinson, M. E., Lunn, D. J., Nazemi, A., Whittell, G. R., Cola, L. D., & Manners, I. (2015) · Chemical Communications · doi:10.1039/c5cc06606a · Cited by 137
Microwave initiated synthesis and application of polyacrylic acid grafted carboxymethyl cellulose
Mishra, S. K., Rani, G. U., & Sen, G. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2011.10.057 · Cited by 135
Organic mixed conductors for electrochemical transistors
Tropp, J., Meli, D., & Rivnay, J. (2023) · Matter · doi:10.1016/j.matt.2023.05.001 · Cited by 141
Curing of a thermosetting powder coating by means of DMTA, TMA and DSC
Ramis, X., Cadenato, A., Morancho, J. M., et al. (2003) · Polymer · doi:10.1016/s0032-3861(03)00059-4 · Cited by 135
Photomediated Controlled Radical Polymerization and Block Copolymerization of Vinylidene Fluoride
Asandei, A. D. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00539 · Cited by 134
Precision Synthesis of Narrow Polydispersity, Ultrahigh Molecular Weight Linear Aromatic Polymers by A2 + B2 Nonstoichiometric Step-Selective Polymerization
Cruz, A. R., Hernández, M. C. G., Guzmán-Gutiérrez, M. T., et al. (2012) · Macromolecules · doi:10.1021/ma301691f · Cited by 134
Tunable Energy Landscapes to Control Pathway Complexity in Self‐Assembled N ‐Heterotriangulenes: Living and Seeded Supramolecular Polymerization
Valera, J. S., Gómez, R., & Sánchez, L. (2017) · Small · doi:10.1002/smll.201702437 · Cited by 136
Synthesis and Characterization of Cross-linked Sulfonated Polystyrene Nanoparticles
Brijmohan, S. B., Swier, S., Weiss, R. A., et al. (2005) · Industrial & Engineering Chemistry Research · doi:10.1021/ie050703v · Cited by 134
Relationships between conversion, temperature and optical properties during composite photopolymerization
Howard, B., Wilson, N. D., Newman, S. M., et al. (2009) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.11.006 · Cited by 133
Facile One-Pot Synthesis of Brush Polymers through Tandem Catalysis Using Grubbs' Catalyst for Both Ring-Opening Metathesis and Atom Transfer Radical Polymerizations
Cheng, C., Khoshdel, E., & Wooley, K. L. (2006) · Nano Letters · doi:10.1021/nl0611900 · Cited by 136
Influence of radiant exposure on contraction stress, degree of conversion and mechanical properties of resin composites
Calheiros, F. C., Kawano, Y., Stansbury, J. W., et al. (2006) · Dental Materials · doi:10.1016/j.dental.2005.11.008 · Cited by 133
Modular and Dynamic Functionalization of Polymeric Scaffolds
South, C. R., Burd, C., & Weck, M. (2006) · Accounts of Chemical Research · doi:10.1021/ar0500160 · Cited by 132
Functionalization of cotton cellulose for improved wound healing
Pinho, E., & Soares, G. M. B. (2018) · Journal of Materials Chemistry B · doi:10.1039/c8tb00052b · Cited by 132
Seeing the Light: Advancing Materials Chemistry through Photopolymerization
Corrigan, N. A., Yeow, J., Judzewitsch, P. R., Xu, J., & Boyer, C. A. (2018) · Angewandte Chemie · doi:10.1002/ange.201805473 · Cited by 142
Strength degradation of polymer concrete in acidic environments
Gorninski, J. P., Molin, D. C. C. D., & Kazmierczak, C. D. S. (2007) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2007.04.001 · Cited by 132
Gradient copolymers
Beginn, U. (2008) · Colloid & Polymer Science · doi:10.1007/s00396-008-1922-y · Cited by 130
Model filled polymers. V. Synthesis of crosslinked monodisperse polymethacrylate beads
Zou, D. W., Ma, S., Guan, R., Park, M., Sun, L., Aklonis, J. J., & Salovey, R. (1992) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.1992.080300118 · Cited by 131
Polietileno: principais tipos, propriedades e aplicações
Coutinho, F. M. B., Ferreira, I. L. D. M., & Maria, L. C. D. S. (2003) · Polímeros · doi:10.1590/s0104-14282003000100005 · Cited by 131

Authors: Odian, G.
Affiliations: John Wiley & Sons (Germany) (DE)
Corresponding author: Odian, George
Venue: Wiley eBooks
Publisher: Wiley
Published: 2004-01-09
DOI: 10.1002/047147875x
OpenAlex: W1495482938
Cited by: 7,158
References: 0
Citations by year: 2026: 149 · 2025: 185 · 2024: 201 · 2023: 213 · 2022: 209 · 2021: 275 · 2020: 288 · 2019: 284 · 2018: 264 · 2017: 279 · 2016: 278 · 2015: 322 · 2014: 313 · 2013: 335 · 2012: 328
FWCI: 59.20
Type: book
Language: en
Open access: closed
Licence: doi.wiley.com/10.1002/tdm_license_1.1 (tdm)
Locations: Wiley eBooks (publishedVersion)
Thammasat University Digital Collections (submittedVersion)
TU Digital Collections (Thammasat University) (submittedVersion)
Andalas University Repository (Andalas University) (submittedVersion)
Topics: Physical Sciences › Chemistry › Organic Chemistry › Advanced Polymer Synthesis and Characterization
Physical Sciences › Materials Science › Polymers and Plastics › Polymer Synthesis and Characterization
Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
Keywords: polymerization, step-growth polymerization, radical chain polymerization, emulsion polymerization, controlled radical polymerization, crosslinking, molecular weight distribution, polymer kinetics, dendrimers, block copolymers, polymer terminology, polymer physical properties, high-performance polymers, organometallic polymers

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Principles of Polymerization

Abstract

Overview

Integrity signals

Verification

Claims the paper makes

Claims other papers make about this one

Citations

Cited by

Related

Metadata

Record

About these checks