Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat

The DOI matches its Crossref record; 58 of the 58 references it cites were found in a registry or an index; none of the 54 sources its claims cite is checked for support yet.

Sensitivity of watershed attributes to spatial resolution and interpolation method of LiDAR DEMs in three distinct landscapes

Open access
Goulden, T., Hopkinson, C., Jamieson, R., Sterling, S. · 2014 · Water Resources Research

Abstract

This study investigates scaling relationships of watershed area and stream networks delineated from LiDAR DEMs. The delineations are tested against spatial resolution, including 1, 5, 10, 25, and 50 m, and interpolation method, including Inverse Distance Weighting (IDW), Moving Average (MA), Universal Kriging (UK), Natural Neighbor (NN), and Triangular Irregular Networks (TIN). Study sites include Mosquito Creek, Scotty Creek, and Thomas Brook, representing landscapes with high, low, and moderate change in elevation, respectively. Results show scale‐dependent irregularities in watershed area due to spatial resolution at Thomas Brook and Mosquito Creek. The highest sensitivity of watershed area to spatial resolution occurred at Scotty Creek, due to high incidence of LiDAR sensor measurement error and subtle changes in elevation. Length of drainage networks did not show a scaling relationship with spatial resolution, due to algorithmic complications of the stream initiation threshold. Stream lengths of main channels at Thomas Brook and Mosquito Creek displayed systematic increases in length with increasing spatial resolution, described through an average fractal dimension of 1.059. The scaling relationship between stream length and DEM resolution allows estimation of stream lengths from low‐resolution DEMs in the absence of high‐resolution DEMs. Single stream validation at Thomas Brook showed the 1 m DEM produced the lowest length error and highest spatial accuracy, at 3.7% and 71.3%, respectively. Single stream validation at Mosquito Creek showed the 25 m DEM produced the lowest length error, and the 1 m DEM the highest spatial accuracy, at 0.6% and 61.0%, respectively.

Overview

CoChat Summary

TL;DR

This study tests how LiDAR DEM spatial resolution (1–50 m) and interpolation method affect watershed area and stream-network delineation across three contrasting landscapes. It finds scale-dependent watershed-area irregularities, no general drainage-density scaling relationship, and a fractal scaling relationship for main-channel stream length (average fractal dimension 1.059) that can rescale coarse-DEM lengths to finer resolutions.

Key findings

  • Watershed-area sensitivity varied by landscape: Scotty Creek showed the largest relative change, reaching 34%, due to LiDAR measurement error and subtle relief; Thomas Brook coarse DEMs allowed an incorrect road crossing that diverted >10% of the watershed; Mosquito Creek changed by only 2.0%.
  • Drainage network length/drainage density did not show a generalized scaling relationship with DEM resolution because of the stream initiation threshold and topography; Scotty Creek decreased with coarser resolution, while Mosquito Creek increased at 25 and 50 m due to lengthening first-order streams.
  • Main-channel stream lengths at Thomas Brook and Mosquito Creek showed systematic scaling with resolution, described by an average fractal dimension of 1.059; rescaling 50 m DEM lengths to 1 m estimates was within 5% at both sites.
  • Validation showed Thomas Brook’s 1 m DEM had the lowest length error and highest spatial accuracy (3.7% and 71.3%), while Mosquito Creek’s 25 m DEM had the lowest length error (0.6%) and its 1 m DEM had the highest spatial accuracy (61.0%).

Methods

  • Generated 75 DEMs from raw ground-filtered LiDAR at 1, 5, 10, 25, and 50 m resolutions using five interpolation methods: Inverse Distance Weighting, Moving Average, Universal Kriging, Natural Neighbor, and Triangular Irregular Network, across Mosquito Creek, Scotty Creek, and Thomas Brook.
  • Used ArcHydro with D8 flow directions, pit filling, stream burning where needed, and a constant 1 ha stream initiation threshold; analyzed watershed area, drainage density, and the longest main-channel stream.
  • Validated stream lengths with RTK GPS at Thomas Brook (3154 points over 10,403 m) and orthophoto digitization at Mosquito Creek (2307 points over 6880 m), using 3 m buffer analyses; estimated fractal dimension from log-log slopes of resolution versus stream length.

Limitations

  • Stated: no validation was possible at Scotty Creek due to lack of sufficiently accurate validation data, and variability there prevented a reliable fractal-dimension estimate.
  • Stated: a single 1 ha stream initiation threshold was applied across all sites and resolutions, though the paper notes this is unrealistic and introduces absolute stream-length inaccuracy and systematic bias, while relative patterns remain valid.
  • Stated: D8 has known deficiencies (eight-direction flow, unrealistic parallel flow in flat topography) but was used because it is the only option in ArcHydro; LiDAR DEM precision is not rigorously quantified, so estimates rely on empirical assessments. Evident: findings are based on only three landscapes and may not generalize to other topographic or surface conditions.

Model-written summary. Check it against the paper before relying on it.

Integrity signals

Registry

Crossref · 10.1002/2013wr013846

Cites

58 of 58 references verified0 citation errors · 0 not checkable

Statistics

Nothing to recompute.

Verification

Claims the paper makes

0 Valid · 5 Not valid · 44 Not checked · 169 Own results and interpretations

105 more claims

Create a free account to see all 218 claims and to verify the 45 references still open.

See all claims — free account
  • It may state two separate claims as one. 76
  • Probably not a substantial claim. 49
  • The quote only partly states this claim. 1

Create a free account to see these claims.

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

Each contradiction between two passages listed here was confirmed by an independent check.

3 of 3

Citations

Cites

Show all 58 references

Research works printed but not linked: 2

  1. Pfeifer N., 2009, Topographic Laser Ranging and Scanning: Principles and Processing, 307
  2. 10.1130/0016‐7606(1952)63 · doi:10.1130/0016-7606(1952)63

Cited by

Metadata

Authors
Goulden, T., Hopkinson, C., Jamieson, R., & Sterling, S.
Affiliations
  • Dalhousie University (CA)
  • University of Lethbridge (CA)
Corresponding author
Goulden, T.
Venue
Water Resources Research
Published
2014-03
Volume
50
Issue
3
Pages
1908-1927
ISSN
  • 0043-1397 (ISSN-L)
  • 1944-7973
OpenAlex
W2000489959
Cited by
55
References
58
Citations by year
2026: 1 · 2025: 4 · 2024: 6 · 2023: 8 · 2022: 2 · 2021: 10 · 2020: 5 · 2019: 3 · 2018: 1 · 2017: 2 · 2016: 4 · 2015: 4 · 2014: 5
FWCI
3.13
Type
journal article
Language
en
Open access
Locations
Water Resources Research (publishedVersion)
Funders
  • Wilfrid Laurier University
  • Atlantic Canada Opportunities Agency
Topics
  • Physical Sciences › Environmental Science › Environmental Engineering › Groundwater and Watershed Analysis
  • Physical Sciences › Environmental Science › Water Science and Technology › Hydrology and Watershed Management Studies
  • Life Sciences › Agricultural and Biological Sciences › Forestry › Remote Sensing and LiDAR Applications
Keywords
LiDAR DEM, spatial resolution, watershed delineation, scaling laws, fractal dimension, inverse distance weighting, universal kriging, natural neighbor interpolation, triangulated irregular network, elevation change, drainage area

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

A language model drew the claims from the paper on 2026-11-18, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).

A second model labelled each claim on 2026-11-18 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.