Seismic properties and anisotropy of the continental crust: Predictions based on mineral texture and rock microstructure
Open accessThe DOI matches its Crossref record; 165 of the 165 references it cites were found in a registry or an index.
Abstract
Progress in seismic methodology and ambitious large‐scale seismic projects are enabling high‐resolution imaging of the continental crust. The ability to constrain interpretations of crustal seismic data is based on laboratory measurements on rock samples and calculations of seismic properties. Seismic velocity calculations and their directional dependence are based on the rock microfabric, which consists of mineral aggregate properties including crystallographic preferred orientation (CPO), grain shape and distribution, grain boundary distribution, and misorientation within grains. Single‐mineral elastic constants and density are crucial for predicting seismic velocities, preferably at conditions that span the crust. However, high‐temperature and high‐pressure elastic constant data are not as common as those determined at standard temperature and pressure (STP; atmospheric conditions). Continental crust has a very diverse mineral composition; however, a select number of minerals appear to dominate seismic properties because of their high‐volume fraction contribution. Calculations of microfabric‐based seismic properties and anisotropy are performed with averaging methods that in their simplest form takes into account the CPO and modal mineral composition, and corresponding single crystal elastic constants. More complex methods can take into account other microstructural characteristics, including the grain shape and distribution of mineral grains and cracks and pores. Dynamic or active wave propagation schemes have recently been developed, which offer a complementary method to existing static averaging methods generally based on the use of the Christoffel equation. A challenge for the geophysics and rock physics communities is the separation of intrinsic factors affecting seismic anisotropy, due to properties of crystals within a rock and apparent sources due to extrinsic factors like cracks, fractures, and alteration. This is of particular importance when trying to deduce crustal composition and the state of deformation from seismic parameters.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Introduction to Solid State Physics
Kittel, C., & Dexter, D. L. (1953) · American Journal of Physics · doi:10.1119/1.1933590 · Cited by 13,240
The determination of the elastic field of an ellipsoidal inclusion, and related problems
Eshelby, J. D. (1957) · Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences · doi:10.1098/rspa.1957.0133 · Cited by 13,026
The Elastic Behaviour of a Crystalline Aggregate
Hill, R. (1952) · Proceedings of the Physical Society. Section A · doi:10.1088/0370-1298/65/5/307 · Cited by 11,503 · cited 1×
“Voigt-Reuss-Hill bound: Average arithmetic mean of the Voigt and Reuss bounds, introduced by Hill [1952], there is no theoretical justification for the average, but it is often close to experimental measurements as shown by Hill.”
ResultReuss, A. (1929) · ZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik · doi:10.1002/zamm.19290090104 · Cited by 6,338 · cited 2×
“The widest theoretical bounds used for prediction of elastic properties of a mixture of phases, used to model seismic velocities, are the upper Voigt and lower Reuss bounds [Voigt, 1928; Reuss, 1929].”
BackgroundMethodComposition of the Continental Crust
Rudnick, R. L., & Gao, S. (2014) · Treatise on Geochemistry · doi:10.1016/b978-0-08-095975-7.00301-6 · Cited by 5,691
Micromechanics of defects in solids
Mura, T. (1987) · Mechanics of Elastic and Inelastic Solids · doi:10.1007/978-94-009-3489-4 · Cited by 5,539
Voigt, W. (1966) · Vieweg+Teubner eBooks · doi:10.1007/978-3-663-15884-4 · Cited by 3,723
A self-consistent mechanics of composite materials
Hill, R. (1965) · Journal of the Mechanics and Physics of Solids · doi:10.1016/0022-5096(65)90010-4 · Cited by 3,712
Composition of the Continental Crust
Rudnick, R. L., & Gao, S. (2003) · Treatise on Geochemistry · doi:10.1016/b0-08-043751-6/03016-4 · Cited by 3,413
Nature and composition of the continental crust: A lower crustal perspective
Rudnick, R. L., & Fountain, D. M. (1995) · Reviews of Geophysics · doi:10.1029/95rg01302 · Cited by 3,323
Metadata
- Authors
- Almqvist, B. S. G., & Mainprice, D.
- Venue
- Reviews of Geophysics
- Publisher
- American Geophysical Union (AGU)
- Published
- 2017-05-21
- Volume
- 55
- Issue
- 2
- Pages
- 367-433
- ISSN
- 0096-1043 (ISSN-L)
- 8755-1209
- 1944-9208
- OpenAlex
- W2602935108
- Cited by
- 204
- References
- 165
- FWCI
- 10.55
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Seismic properties and anisotropy of the continental crust: Predictions based on mineral texture and rock microstructure. https://app.cochat.ai/papers/10.1002/2016rg000552
- The paper
- Almqvist, B. S. G., & Mainprice, D. (2017). Seismic properties and anisotropy of the continental crust: Predictions based on mineral texture and rock microstructure. Reviews of Geophysics. https://doi.org/10.1002/2016rg000552
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.