The DOI matches its Crossref record.
Metal Matrix Composites: Custom‐made Materials for Automotive and Aerospace Engineering
Abstract
Preface. 1 Basics of Metal Matrix Composites (Karl Ulrich Kainer). 1.1 Introduction. 1.2 Combination of Materials for Light Metal Matrix Composites. 1.3 Mechanism of Reinforcement. 1.4 Interface Influence. 1.5 Structure and Properties of Light Metal Composite Materials. 1.6 Possible Applications of Metal Matrix Composites. 1.7 Recycling. References. 2 Particles, Fibers and Short Fibers for the Reinforcement of Metal Materials (Hajo Dieringa and Karl Ulrich Kainer). 2.1 Introduction. 2.2 Particles. 2.3 Continuous Fibers. 2.4 Short Fibers and Whiskers. References. 3 Preforms for the Reinforcement of Light Metals - Manufacture, Applications and Potential (R. Buschmann). 3.1 Introduction. 3.2 Manufacturing Principle of Preforms. 3.3 Current Applications. 3.4 Summary and Outlook. References. 4 Aluminum-matrix Composite Materials in Combustion Engines (E. Kohler and J. Niehues). 4.1 Introduction. 4.2 Cylinder Crankcase Design Concepts and Cylinder Surface Technology. 4.3 Production of LOKASIL(r) Cylinder Crankcases. 4.4 Summary and Outlook. References. 5 Production of Composites or Bonding of Material by Thermal Coating Processes (B. Wielage, A. Wank, and J. Wilden). 5.1 Introduction. 5.2 Thermal Spraying. 5.3 Cladding. 5.4 Summary and Outlook. References. 6 Machining Technology Aspects of Al-MMC (K. Weinert, M. Buschka, and M. Lange). 6.1 Introduction. 6.2 Machining Problems, Cutting Material Selection and Surface Layer Influence. 6.3 Processing of Components of Metal Matrix Composites. 6.4 Summary. References. 7 Mechanical Behavior and Fatigue Properties of Metal-Matrix Composites (H. Biermann and O. Hartmann). 7.1 Introduction. 7.2 Basics and State of Knowledge. 7.3 Experimental. 7.4 Results and Comparison of Different MMCs. 7.5 Summary. Acknowledgement. References. 8 Interlayers in Metal Matrix Composites: Characterisation and Relevance for the Material Properties (J. Woltersdorf, A. Feldhoff, and E. Pippel). 8.1 Summary. 8.2 The Special Role of Interfaces and Interlayers. 8.3 Experimental. 8.4 Interlayer Optimisation in C/Mg-Al Composites by Selection of Reaction Partners. 8.5 Interlayer Optimisation in C/Mg-Al Composites by Fiber Precoating. Acknowledgements. References. 9 Metallic Composite Materials for Cylinder Surfaces of Combustion Engines and Their Finishing by Honing (J. Schmid). 9.1 Introduction. 9.2 Composites Based on Light Metals. 9.3 Plasma Coatings. References. 10 Powder Metallurgically Manufactured Metal Matrix Composites (Norbert Hort and Karl Ulrich Kainer). 10.1 Summary. 10.2 Introduction. 10.3 Source Materials. 10.4 Manufacture of MMCs. 10.5 Materials. 10.6 Summary and Outlook. References. 11 Spray Forming - An Alternative Manufacturing Technique for MMC Aluminum Alloys (P. Krug, G. Sinha). 11.1 Introduction. 11.2 Spray Forming. 11.3 Techniques. 11.4 Materials. Acknowledgement. References. 12 Noble and Nonferrous Metal Matrix Composite Materials (C. Blawert). 12.1 Introduction. 12.2 Layer Composite Materials. 12.3 Particle Reinforced Composites. 12.4 Infiltration Composites. 12.5 Fiber Reinforced Composites. References. Subject Index.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Wu, B., Pan, Z., Ding, D., Cuiuri, D., Li, H., Xu, J., & Norrish, J. (2018) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2018.08.001 · Cited by 1,577
Fiber-reinforced geopolymer composites: A review
Ranjbar, N., & Zhang, M. (2020) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2019.103498 · Cited by 651
Yu, W. H., Sing, S. L., Chua, C. K., Kuo, C. N., & Tian, X. L. (2019) · Progress in Materials Science · doi:10.1016/j.pmatsci.2019.04.006 · Cited by 586
Machine-learning phase prediction of high-entropy alloys
Huang, W., Martin, P., & Zhuang, H. L. (2019) · Acta Materialia · doi:10.1016/j.actamat.2019.03.012 · Cited by 556
A repertoire of biomedical applications of noble metal nanoparticles
Azharuddin, M., Zhu, G. H., Das, D., Ozgur, E., Uzun, L., Turner, A. P. F., & Patra, H. K. (2019) · Chemical Communications · doi:10.1039/c9cc01741k · Cited by 395
Metadata
- Venue
- Wiley eBooks
- Publisher
- Wiley
- Published
- 2006-01-09
- OpenAlex
- W1620995406
- Cited by
- 529
- References
- 0
- FWCI
- 10.00
- Type
- book
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Metal Matrix Composites: Custom‐made Materials for Automotive and Aerospace Engineering. https://app.cochat.ai/papers/10.1002/3527608117
- The paper
- Metal Matrix Composites: Custom‐made Materials for Automotive and Aerospace Engineering. (2006). Wiley eBooks. https://doi.org/10.1002/3527608117
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.