The DOI matches its Crossref record.
Integrated Passive Component Technology
Abstract
Contributors.Preface.1 Introduction (Richard K. Ulrich).1.1 Status and Trends in Discrete Passive Components.1.2 Definitions and Configurations of Integrated Passives.1.3 Comparison to Integrated Active Devices.1.4 Substrates and Interconnect Systems for Integrated Passives.1.5 Fabrication of Integrated Passives.1.6 Reasons for Integrating Passive Devices.1.7 Problems with Integrating Passive Devices.1.8 Applications for Integrated Passives.1.9 The Past and Future of Integrated Passives.1.10 Organization of this Book.References.2 Characteristics and Performance of Planar Resistors (Richard K. Ulrich).2.1 Performance Parameters.2.2 Resistance in Electronic Materials.2.3 Sizing Integrated Resistors.2.4 Trimming.References.3 Integrated Resistor Materials and Processes (Richard K. Ulrich).3.1 Single-Component Metals.3.2 Metal Alloys and Metal-Nonmetal Compounds.3.3 Semiconductors.3.4 Cermets.3.5 Polymer Thick Film.3.6 Ink Jet Deposition.3.7 Commercialized Processes.3.8 Summary.References.4 Dielectric Materials for Integrated Capacitors (Richard K. Ulrich).4.1 Polarizability and Capacitance.4.2 Capacitance Density.4.3 Temperature Effects.4.4 Frequency and Voltage Effects.4.5 Aging Effects.4.6 Composition and Morphology Effects.4.7 Leakage and Breakdown.4.8 Dissipation Factor.4.9 Comparison to EIA Dielectric Classifications.4.10 Matching Dielectric Materials to Applications.References.5 Size and Configuration of Integrated Capacitors (Richard K. Ulrich).5.1 Comparison of Integrated and Discrete Areas.5.2 Layout Options.5.3 Tolerance.5.4 Mixed Dielectric Strategies.5.5 CV Product.5.6 Maximum Capacitance Density and Breakdown Voltage.References.6 Processing Integrated Capacitors (Richard K. Ulrich).6.1 Sputtering.6.2 CVD, PECVD and MOCVD.6.3 Anodization.6.4 Sol-Gel and Hydrothermal Ferroelectrics.6.5 Thin- and Thick-Film Polymers.6.6 Thick-Film Dielectrics.6.7 Interlayer Insulation.6.8 Interdigitated Capacitors.6.9 Capacitor Plate Materials.6.10 Trimming Integrated Capacitors.6.11 Commercialized Integrated Capacitor Technologies.6.12 Summary.References.7 Defects and Yield Issues (Richard K. Ulrich).7.1 Causes of Fatal Defects in Integrated Capacitors.7.2 Measurement of Defect Density.7.3 Defect Density and System Yield.7.3.1 Predicting Yield from Defect Density.7.4 Yield Enhancement Techniques for Capacitors.7.5 Conclusions.References.8 Electrical Performance of Integrated Capacitors (Richard K. Ulrich and Leonard W. Schaper).8.1 Modeling Ideal Passives.8.2 Modeling Real Capacitors.8.3 Electrical Performance of Discrete and Integrated Capacitors.8.4 Dissipation Factor of Real Capacitors.8.5 Measurement of Capacitor Properties.8.6 Summary.References.9 Decoupling (Leonard W. Schaper).9.1 Power Distribution.9.2 Decoupling with Discrete Capacitors.9.3 Decoupling with Integrated Capacitors.9.4 Dielectrics and Configurations for Integrated Decoupling.9.5 Integrated Decoupling as an Entry Application.References.10 Integrated Inductors (Geert J. Carchon and Walter De Raedt).10.1 Introduction.10.2 Inductor Behavior and Performance Parameters.10.3 Inductor Performance Prediction.10.4 Integrated Inductor Examples.10.5 Use of Inductors in Circuits: Examples.10.6 Conclusions.Acknowledgments.References.11 Modeling of Integrated Inductors and Resistors for Microwave Applications (Zhenwen Wang, M. Jamal Deen, and A. H. Rahal).11.1 Introduction.11.2 Modeling of Spiral Inductors.11.3 Modeling of Thin-Film Resistors.11.4 Conclusions.References.Appendix: Characteristics of Microscript Lines.12 Other Applications and Integration Technologies (Elizabeth Logan, Geert J. Carchon, Walter De Raedt, Richard K. Ulrich, and Leonard W. Schaper).12.1 Demonstration Devices Fabricated with Integrated Passives.12.2 Commercialized Thin-Film Build-Up Integrated Passives.12.3 Other Integrated Passive Technologies.12.4 Summary.Acknowledgments.References.13 The Economics of Embedded Passives (Peter A. Sandborn).13.1 Introduction.13.2 Modeling Embedded Passive Economics.13.3 Key Aspects of Modeling Embedded Passive Costs.13.4 Example Case Studies.13.5 Summary.Acknowledgments.References.14 The Future of Integrated Passives (Richard K. Ulrich).14.1 Status of Passive Integration.14.2 Issues for Implementation on Organic Substrates.14.3 Progress on Board-Level Implementation.14.4 Three Ways In for Organic Boards.14.5 Conclusion.Index.About the Editors.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Fundamentals, processes and applications of high-permittivity polymer–matrix composites
Dang, Z.-M., Yuan, J.-K., Zha, J.-W., Zhou, T., Li, S.-T., & Hu, G.-H. (2012) · Progress in Materials Science · doi:10.1016/j.pmatsci.2011.08.001 · Cited by 1,783
Tummala, R. R. (2004) · IEEE Transactions on Advanced Packaging · doi:10.1109/tadvp.2004.830354 · Cited by 274
Modeling and optimization of printed spiral coils in air, saline, and muscle tissue environments
Jow, U.-M., & Ghovanloo, M. (2009) · IEEE Transactions on Biomedical Circuits and Systems · doi:10.1109/tbcas.2009.2025366 · Cited by 241
“Therefore, RS at the power carrier frequency can be defined as RDC when it is modified by the skin and eddy current effects [24].”
Metadata
- Venue
- Wiley eBooks
- Publisher
- Wiley
- Published
- 2003-06-16
- OpenAlex
- W327832574
- Cited by
- 219
- References
- 0
- FWCI
- 7.01
- Type
- book
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Integrated Passive Component Technology. https://app.cochat.ai/papers/10.1002/9780471722939
- The paper
- Integrated Passive Component Technology. (2003). Wiley eBooks. https://doi.org/10.1002/9780471722939
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.