The DOI matches its Crossref record; 39 of the 39 references it cites were found in a registry or an index.
Application of latent variable methods to process control and multivariate statistical process control in industry
Abstract
Multivariate monitoring and control schemes based on latent variable methods have been receiving increasing attention by industrial practitioners in the last 15 years. Several companies have enthusiastically adopted the methods and have reported many success stories. Applications have been reported where multivariate statistical process control, fault detection and diagnosis is achieved by utilizing the latent variable space, for continuous and batch processes, as well as, for process transitions as for example start ups and re‐starts. This paper gives an overview of the latest developments in multivariate statistical process control (MSPC) and its application for fault detection and isolation (FDI) in industrial processes. It provides a critical review of the methodology and describes how it is transferred to the industrial environment. Recent applications of latent variable methods to process control as well as to image analysis for monitoring and feedback control are discussed. Finally it is emphasized that the multivariate nature of the data should be preserved when data compression and data preprocessing is applied. It is shown that univariate data compression and reconstruction may hinder the validity of multivariate analysis by introducing spurious correlations. Copyright © 2005 John Wiley & Sons, Ltd.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A User's Guide to Principal Components
Leigh, S., & Jackson, J. E. (1993) · Technometrics · doi:10.2307/1269292 · Cited by 3,332
A review of process fault detection and diagnosis
Venkatasubramanian, V., Rengaswamy, R., Yin, K., & Kavuri, S. N. (2003) · Computers & Chemical Engineering · doi:10.1016/s0098-1354(02)00160-6 · Cited by 2,723
Cross-Validatory Estimation of the Number of Components in Factor and Principal Components Models
Wold, S. (1978) · Technometrics · doi:10.1080/00401706.1978.10489693 · Cited by 2,601
A Use's Guide to Principal Components
Jackson, J. E. (1991) · Wiley Series in Probability and Statistics · doi:10.1002/0471725331 · Cited by 2,516
A review of process fault detection and diagnosis
Venkatasubramanian, V., Rengaswamy, R., Kavuri, S. N., & Yin, K. (2003) · Computers & Chemical Engineering · doi:10.1016/s0098-1354(02)00162-x · Cited by 1,859
A review of process fault detection and diagnosis
Venkatasubramanian, V., Rengaswamy, R., & Kavuri, S. N. (2003) · Computers & Chemical Engineering · doi:10.1016/s0098-1354(02)00161-8 · Cited by 1,530
Box, G. E. P. (1954) · The Annals of Mathematical Statistics · doi:10.1214/aoms/1177728786 · Cited by 1,513
Monitoring batch processes using multiway principal component analysis
Nomikos, P., & MacGregor, J. F. (1994) · AIChE Journal · doi:10.1002/aic.690400809 · Cited by 1,483
Multivariate SPC Charts for Monitoring Batch Processes
Nomikos, P., & MacGregor, J. F. (1995) · Technometrics · doi:10.1080/00401706.1995.10485888 · Cited by 1,422
Statistical process control of multivariate processes
MacGregor, J. F., & Kourti, T. (1995) · Control Engineering Practice · doi:10.1016/0967-0661(95)00014-l · Cited by 1,270
Self-citation
Cited by
Reis, M., & Gins, G. (2017) · Processes · doi:10.3390/pr5030035 · Cited by 294
Challenges in the Development of Soft Sensors for Bioprocesses: A Critical Review
Brunner, V., Siegl, M., Geier, D., & Becker, T. (2021) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2021.722202 · Cited by 100
The Use of UV-Vis Spectroscopy in Bioprocess and Fermentation Monitoring
Roberts, J., Power, A., Chapman, J., Chandra, S., & Cozzolino, D. (2018) · Fermentation · doi:10.3390/fermentation4010018 · Cited by 53
Metadata
- Authors
- Kourti, T.
- Venue
- International Journal of Adaptive Control and Signal Processing
- Publisher
- Wiley
- Published
- 2005-04-07
- Volume
- 19
- Issue
- 4
- Pages
- 213-246
- ISSN
- 0890-6327 (ISSN-L)
- 1099-1115
- OpenAlex
- W2099650558
- Cited by
- 330
- References
- 39
- FWCI
- 30.13
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Application of latent variable methods to process control and multivariate statistical process control in industry. https://app.cochat.ai/papers/10.1002/acs.859
- The paper
- Kourti, T. (2005). Application of latent variable methods to process control and multivariate statistical process control in industry. International Journal of Adaptive Control and Signal Processing. https://doi.org/10.1002/acs.859
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.