Latent Heat Thermal Energy Storage Systems with Solid–Liquid Phase Change Materials: A Review
The DOI matches its Crossref record; 261 of the 261 references it cites were found in a registry or an index.
Abstract
This paper provides a review of the solid–liquid phase change materials (PCMs) for latent heat thermal energy storage (LHTES). The commonly used solid–liquid PCMs and their thermal properties are summarized here firstly. Two major drawbacks that seriously limit the application of PCMs in an LHTES system, that is, low thermal conductivity and liquid leakage, are discussed. Various methods for enhancing the thermal conductivity and heat transfer of solid–liquid PCMs are explained. Previous studies regarding form‐stable composite PCMs and microencapsulated PCMs are also presented. Furthermore, applications of the solid–liquid PCMs used in LHTES and thermal management systems are introduced and analyzed. Finally, future outlooks and research topics are proposed.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Therefore, solid‐liquid PCMs are the most practical candidates and are also the most widely studied PCMs in recent years.[ 35 , 50 , 51 ]”
From Carbon-Based Composite Phase Change Materials for Thermal Energy Storage, Transfer, and Conversion (2021) · cites this paper as [51]
Citations
Cites
Review on thermal energy storage with phase change materials and applications
Sharma, A., Tyagi, V. V., Chen, C. R., & Buddhi, D. (2009) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2007.10.005 · Cited by 5,936
Zalba, B., Marı́n, J. M., Cabeza, L. F., & Mehling, H. (2003) · Applied Thermal Engineering · doi:10.1016/s1359-4311(02)00192-8 · Cited by 4,738
Review on thermal energy storage with phase change materials (PCMs) in building applications
Zhou, D., Zhao, C. Y., & Tian, Y. (2012) · Applied Energy · doi:10.1016/j.apenergy.2011.08.025 · Cited by 1,896
Low temperature latent heat thermal energy storage: Heat storage materials
Abhat, A. (1983) · Solar Energy · doi:10.1016/0038-092x(83)90186-x · Cited by 1,711
High-temperature phase change materials for thermal energy storage
Kenisarin, M. M. (2010) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2009.11.011 · Cited by 1,192
Battery thermal models for hybrid vehicle simulations
Pesaran, A. A. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00200-8 · Cited by 1,116
Thermal conductivity enhancement of phase change materials for thermal energy storage: A review
Fan, L., & Khodadadi, J. M. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2010.08.007 · Cited by 1,003
Sarı, A., & Karaipekli, A. (2007) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2006.11.004 · Cited by 978
Thermal energy storage: Recent developments and practical aspects
Zhang, H., Baeyens, J., Cáceres, G., Degrève, J., & Lv, Y. (2016) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2015.10.003 · Cited by 910
Fatty acids as phase change materials: A review
Yuan, Y., Zhang, N., Tao, W., Cao, X., & He, Y. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.08.107 · Cited by 755
Self-citationThermal conductivity enhancement of phase change materials using a graphite matrix
Mills, A., Farid, M., Selman, J. R., & Al-Hallaj, S. (2006) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2005.11.022 · Cited by 627
Preparation and thermal characterization of paraffin/metal foam composite phase change material
Xiao, X., Zhang, P., & Li, M. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.04.050 · Cited by 627
Ibrahim, N. I., Al-Sulaiman, F. A., Rahman, S., Yilbas, B. S., & Sahin, A. Z. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.01.169 · Cited by 580
Zhang, H., Wang, X., & Wu, D. (2010) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2009.11.036 · Cited by 534
Sarı, A. (2004) · Energy Conversion and Management · doi:10.1016/j.enconman.2003.10.022 · Cited by 526
Study on paraffin/expanded graphite composite phase change thermal energy storage material
Zhang, Z., & Fang, X. (2006) · Energy Conversion and Management · doi:10.1016/j.enconman.2005.03.004 · Cited by 518
Self-citationYinping, Z., Yi, J., & Yi, J. (1999) · Measurement Science and Technology · doi:10.1088/0957-0233/10/3/015 · Cited by 489
Fan, L.-W., Fang, X., Wang, X., Zeng, Y., Xiao, Y.-Q., Yu, Z.-T., Xu, X., Hu, Y.-C., & Cen, K.-F. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.04.043 · Cited by 478
Sarı, A., & Karaipekli, A. (2009) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2008.11.057 · Cited by 469
Yang, J., Zhang, E., Li, X., Zhang, Y., Qu, J., & Yu, Z.-Z. (2016) · Carbon · doi:10.1016/j.carbon.2015.10.082 · Cited by 458
Kim, S., & Drzal, L. T. (2009) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2008.09.010 · Cited by 452
Kamkari, B., & Shokouhmand, H. (2014) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2014.07.056 · Cited by 437
Thermal performance enhancement of shell and tube Latent Heat Storage Unit using longitudinal fins
Rathod, M. K., & Banerjee, J. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2014.10.074 · Cited by 427
Wang, Z., Zhang, Z., Jia, L., & Yang, L. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.01.009 · Cited by 425
Self-citationA nano-graphite/paraffin phase change material with high thermal conductivity
Li, M. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.01.031 · Cited by 421
Khateeb, S. A., Amiruddin, S., Farid, M., Selman, J. R., & Al-Hallaj, S. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2004.09.033 · Cited by 410
Khateeb, S. A., Farid, M. M., Selman, J. R., & Al-Hallaj, S. (2004) · Journal of Power Sources · doi:10.1016/j.jpowsour.2003.09.070 · Cited by 405
Wang, Y., Tang, B., & Zhang, S. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201203728 · Cited by 405
Lv, P., Liu, C., & Rao, Z. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.10.014 · Cited by 405
Rao, Z., Wang, Q., & Huang, C. (2016) · Applied Energy · doi:10.1016/j.apenergy.2015.12.021 · Cited by 404
Xia, L., Zhang, P., & Wang, R. Z. (2010) · Carbon · doi:10.1016/j.carbon.2010.03.030 · Cited by 397
Salt hydrates as latent heat storage materials:Thermophysical properties and costs
Kenisarin, M., & Mahkamov, K. (2016) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2015.10.029 · Cited by 396
Wang, J., Xie, H., Xin, Z., Li, Y., & Chen, L. (2010) · Solar Energy · doi:10.1016/j.solener.2009.12.004 · Cited by 395
Thermophysical properties of some organic phase change materials for latent heat storage. A review
Kenisarin, M. M. (2014) · Solar Energy · doi:10.1016/j.solener.2014.05.001 · Cited by 385
Thermal management of a Li-ion battery using carbon fiber-PCM composites
Babapoor, A., Azizi, M., & Karimi, G. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.02.068 · Cited by 380
Samimi, F., Babapoor, A., Azizi, M., & Karimi, G. (2016) · Energy · doi:10.1016/j.energy.2015.12.064 · Cited by 372
Zhou, D., & Zhao, C. Y. (2011) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2010.11.022 · Cited by 366
Karaipekli, A., Sarı, A., & Kaygusuz, K. (2007) · Renewable Energy · doi:10.1016/j.renene.2006.11.011 · Cited by 364
Fang, G., Li, H., Yang, F., Liu, X., & Wu, S. (2009) · Chemical Engineering Journal · doi:10.1016/j.cej.2009.06.019 · Cited by 363
Agyenim, F., Eames, P., & Smyth, M. (2010) · Renewable Energy · doi:10.1016/j.renene.2009.03.010 · Cited by 361
Yearly energy performance of a photovoltaic-phase change material (PV-PCM) system in hot climate
Hasan, A., Sarwar, J., Alnoman, H., & Abdelbaqi, S. (2017) · Solar Energy · doi:10.1016/j.solener.2017.01.070 · Cited by 351
Ling, Z., Chen, J., Xu, T., Fang, X., Gao, X., & Zhang, Z. (2015) · Energy Conversion and Management · doi:10.1016/j.enconman.2014.11.040 · Cited by 337
Self-citationJiang, G., Huang, J., Fu, Y., Cao, M., & Liu, M. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.07.197 · Cited by 335
Shi, J.-N., Ger, M.-D., Liu, Y.-M., Fan, Y.-C., Wen, N.-T., Lin, C.-K., & Pu, N.-W. (2013) · Carbon · doi:10.1016/j.carbon.2012.08.068 · Cited by 328
Alkan, C., Sarı, A., & Karaipekli, A. (2011) · Energy Conversion and Management · doi:10.1016/j.enconman.2010.07.047 · Cited by 326
Baby, R., & Balaji, C. (2012) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2011.11.020 · Cited by 326
Sarı, A., Alkan, C., & Karaipekli, A. (2010) · Applied Energy · doi:10.1016/j.apenergy.2009.10.011 · Cited by 324
Rao, Z., Wang, S., & Zhang, G. (2011) · Energy Conversion and Management · doi:10.1016/j.enconman.2011.07.009 · Cited by 322
Wu, S., Zhu, D., Zhang, X., & Huang, J. (2010) · Energy & Fuels · doi:10.1021/ef9013967 · Cited by 309
Alkan, C., & Sari, A. (2008) · Solar Energy · doi:10.1016/j.solener.2007.07.001 · Cited by 308
An experimental study of enhanced heat transfer in rectangular PCM thermal storage
Stritih, U. (2004) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2004.02.001 · Cited by 304
Chandel, S. S., & Agarwal, T. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.02.001 · Cited by 299
Khadiran, T., Hussein, M. Z., Zainal, Z., & Rusli, R. (2015) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2015.06.039 · Cited by 295
Zhang, H., & Wang, X. (2009) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2008.09.013 · Cited by 294
Numerical study of melting inside concentric and eccentric horizontal annulus
Darzi, A. R., Farhadi, M., & Sedighi, K. (2012) · Applied Mathematical Modelling · doi:10.1016/j.apm.2011.11.033 · Cited by 288
Thermal optimization of PCM based pin fin heat sinks: An experimental study
Baby, R., & Balaji, C. (2013) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2012.10.056 · Cited by 287
Wang, W., Yang, X., Fang, Y., Ding, J., & Yan, J. (2009) · Applied Energy · doi:10.1016/j.apenergy.2008.10.020 · Cited by 287
Zhang, H., & Wang, X. (2009) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2009.02.021 · Cited by 283
Heat transfer enhancement of phase change composite material: Copper foam/paraffin
Wang, C., Lin, T., Li, N., & Zheng, H. (2016) · Renewable Energy · doi:10.1016/j.renene.2016.04.039 · Cited by 278
Wang, L., & Meng, D. (2010) · Applied Energy · doi:10.1016/j.apenergy.2010.01.010 · Cited by 275
Low temperature heat storage with phase change materials
Lane, G. A. (1980) · International Journal of Ambient Energy · doi:10.1080/01430750.1980.9675731 · Cited by 272
Experimentation with a water tank including a PCM module
Cabeza, L. F., Ibáñez, M., Solé, C., Roca, J., & Nogués, M. (2006) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2005.08.002 · Cited by 272
Zhao, J., Lv, P., & Rao, Z. (2017) · Experimental Thermal and Fluid Science · doi:10.1016/j.expthermflusci.2016.11.017 · Cited by 270
Onder, E., Sarier, N., & Cimen, E. (2008) · Thermochimica Acta · doi:10.1016/j.tca.2007.11.007 · Cited by 266
Shilei, L., Neng, Z., & Guohui, F. (2006) · Energy and Buildings · doi:10.1016/j.enbuild.2005.10.006 · Cited by 266
He, F., Wang, X., & Wu, D. (2014) · Energy · doi:10.1016/j.energy.2013.11.088 · Cited by 265
Sarı, A., Karaipekli, A., & Alkan, C. (2009) · Chemical Engineering Journal · doi:10.1016/j.cej.2009.09.005 · Cited by 263
Fang, X., Fan, L.-W., Ding, Q., Wang, X., Yao, X.-L., Hou, J.-F., Yu, Z.-T., Cheng, G.-H., Hu, Y.-C., & Cen, K.-F. (2013) · Energy & Fuels · doi:10.1021/ef400702a · Cited by 261
Mehrali, M., Latibari, S. T., Mehrali, M., Indra Mahlia, T. M., Cornelis Metselaar, H. S., Naghavi, M. S., Sadeghinezhad, E., & Akhiani, A. R. (2013) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2013.08.035 · Cited by 255
Chai, L., Wang, X., & Wu, D. (2015) · Applied Energy · doi:10.1016/j.apenergy.2014.11.006 · Cited by 253
Phase change in multi-tube heat exchangers
Esapour, M., Hosseini, M. J., Ranjbar, A. A., Pahamli, Y., & Bahrampoury, R. (2016) · Renewable Energy · doi:10.1016/j.renene.2015.07.063 · Cited by 250
Zhang, Q., Zhong, S., & Zhong, J. (2015) · Advances in Mechanical Engineering · doi:10.1177/1687814015588726 · Cited by 250
Huang, X., Lin, Y., Alva, G., & Fang, G. (2017) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2017.05.059 · Cited by 247
Sarı, A. (2003) · Energy Conversion and Management · doi:10.1016/s0196-8904(02)00251-0 · Cited by 245
Tao, Y. B., Lin, C. H., & He, Y. L. (2015) · Energy Conversion and Management · doi:10.1016/j.enconman.2015.03.051 · Cited by 242
High temperature latent heat thermal energy storage using heat pipes
Shabgard, H., Bergman, T. L., Sharifi, N., & Faghri, A. (2010) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2010.03.035 · Cited by 242
Ye, S., Zhang, Q., Hu, D., & Feng, J. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta05448b · Cited by 232
Impact of phase change wall room on indoor thermal environment in winter
Shilei, L., Neng, Z., & Guohui, F. (2006) · Energy and Buildings · doi:10.1016/j.enbuild.2005.02.007 · Cited by 232
Bayés-García, L., Ventolà, L., Cordobilla, R., Benages, R., Calvet, T., & Cuevas-Diarte, M. A. (2010) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2010.03.014 · Cited by 231
Microencapsulation of coco fatty acid mixture for thermal energy storage with phase change material
Özonur, Y., Mazman, M., Paksoy, H. Ö., & Evliya, H. (2006) · International Journal of Energy Research · doi:10.1002/er.1177 · Cited by 228
Dhaidan, N. S., Khodadadi, J. M., Al-Hattab, T. A., & Al-Mashat, S. M. (2013) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2013.08.002 · Cited by 226
Sarı, A., & Karaipekli, A. (2008) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2007.12.016 · Cited by 226
Yuan, Y., Cao, X., Xiang, B., & Du, Y. (2016) · Solar Energy · doi:10.1016/j.solener.2016.07.014 · Cited by 225
Self-citationTumirah, K., Hussein, M. Z., Zulkarnain, Z., & Rafeadah, R. (2014) · Energy · doi:10.1016/j.energy.2014.01.033 · Cited by 224
Sánchez-Silva, L., Rodríguez, J. F., Romero, A., Borreguero, A. M., Carmona, M., & Sánchez, P. (2010) · Chemical Engineering Journal · doi:10.1016/j.cej.2009.12.013 · Cited by 218
Mar n, J. M., Zalba, B. N., Cabeza, L. F., & Mehling, H. (2003) · Measurement Science and Technology · doi:10.1088/0957-0233/14/2/305 · Cited by 215
Wang, Q., Rao, Z., Huo, Y., & Wang, S. (2016) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2015.11.005 · Cited by 213
Yang, X., Yuan, Y., Zhang, N., Cao, X., & Liu, C. (2014) · Solar Energy · doi:10.1016/j.solener.2013.11.021 · Cited by 211
Self-citationEnhancement of latent heat energy storage using embedded heat pipes
Robak, C. W., Bergman, T. L., & Faghri, A. (2011) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2011.03.038 · Cited by 210
Wu, Y., & Wang, T. (2015) · Energy Conversion and Management · doi:10.1016/j.enconman.2015.05.006 · Cited by 205
Experimental study on enhancement of thermal energy storage with phase-change material
Yang, J., Yang, L., Xu, C., & Du, X. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.02.028 · Cited by 204
Sarı, A., Sarı, H., & Önal, A. (2004) · Energy Conversion and Management · doi:10.1016/s0196-8904(03)00154-7 · Cited by 203
Li, M., Kao, H., Wu, Z., & Tan, J. (2011) · Applied Energy · doi:10.1016/j.apenergy.2010.11.001 · Cited by 202
Khanna, S., Reddy, K. S., & Mallick, T. K. (2017) · Energy · doi:10.1016/j.energy.2017.05.150 · Cited by 201
Phase Change Heat Transfer Enhancement Using Copper Porous Foam
Siahpush, A., O’Brien, J., & Crepeau, J. (2008) · Journal of Heat Transfer · doi:10.1115/1.2928010 · Cited by 196
Alshaer, W. G., Nada, S. A., Rady, M. A., Le Bot, C., & Palomo Del Barrio, E. (2015) · Energy Conversion and Management · doi:10.1016/j.enconman.2014.10.045 · Cited by 196
(2003) · Fuel and Energy Abstracts · doi:10.1016/s0140-6701(03)92561-6 · Cited by 194
Li, B., Liu, T., Hu, L., Wang, Y., & Nie, S. (2013) · Chemical Engineering Journal · doi:10.1016/j.cej.2012.11.077 · Cited by 190
Jiang, F., Wang, X., & Wu, D. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.08.061 · Cited by 190
Zhang, N., Yuan, Y., Wang, X., Cao, X., Yang, X., & Hu, S. (2013) · Chemical Engineering Journal · doi:10.1016/j.cej.2013.07.008 · Cited by 190
Self-citationSynthesis and characterization of microcapsules containing Rubitherm®RT27 obtained by spray drying
Borreguero, A. M., Valverde, J. L., Rodríguez, J. F., Barber, A. H., Cubillo, J. J., & Carmona, M. (2011) · Chemical Engineering Journal · doi:10.1016/j.cej.2010.10.055 · Cited by 189
Chen, Z., Gu, M., & Peng, D. (2010) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2010.04.031 · Cited by 189
Chen, Z., Shan, F., Cao, L., & Fang, G. (2012) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2012.03.013 · Cited by 189
Thermal energy storage performance of paraffin in a novel tube-in-shell system
Akgün, M., Aydın, O., & Kaygusuz, K. (2008) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2007.05.013 · Cited by 184
Murray, R. E., & Groulx, D. (2014) · Renewable Energy · doi:10.1016/j.renene.2013.08.007 · Cited by 182
Cao, F., & Yang, B. (2014) · Applied Energy · doi:10.1016/j.apenergy.2013.08.048 · Cited by 181
Sarı, A. (2005) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2005.01.010 · Cited by 180
Rao, Z., Huo, Y., Liu, X., & Zhang, G. (2015) · Journal of the Energy Institute · doi:10.1016/j.joei.2014.09.006 · Cited by 179
Huang, Z., Gao, X., Xu, T., Fang, Y., & Zhang, Z. (2014) · Applied Energy · doi:10.1016/j.apenergy.2013.11.019 · Cited by 178
Self-citationTang, B., Wang, L., Xu, Y., Xiu, J., & Zhang, S. (2016) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2015.08.012 · Cited by 175
Chen, C., Wang, L., & Huang, Y. (2008) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2008.05.013 · Cited by 170
Mazo, J., Delgado, M., Marín, J. M., & Zalba, B. (2011) · Energy and Buildings · doi:10.1016/j.enbuild.2011.12.022 · Cited by 169
Electrospun phase change fibers based on polyethylene glycol/cellulose acetate blends
Chen, C., Wang, L., & Huang, Y. (2011) · Applied Energy · doi:10.1016/j.apenergy.2011.02.026 · Cited by 169
Zhong, L., Zhang, X., Luan, Y., Wang, G., Feng, Y., & Feng, D. (2014) · Solar Energy · doi:10.1016/j.solener.2014.05.019 · Cited by 168
Yin, D., Ma, L., Liu, J., & Zhang, Q. (2014) · Energy · doi:10.1016/j.energy.2013.10.004 · Cited by 168
Enibe, S. O. (2002) · Renewable Energy · doi:10.1016/s0960-1481(01)00173-2 · Cited by 168
Li, M., Wu, Z., & Kao, H. (2011) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2011.04.017 · Cited by 168
Thermal conductivity improvement of phase change materials/graphite foam composites
Moeini Sedeh, M., & Khodadadi, J. M. (2013) · Carbon · doi:10.1016/j.carbon.2013.04.004 · Cited by 167
Fernández, A. I., Barreneche, C., Belusko, M., Segarra, M., Bruno, F., & Cabeza, L. F. (2017) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2017.06.054 · Cited by 162
Thermal management of electronic devices using carbon foam and PCM/nano-composite
Alshaer, W. G., Nada, S. A., Rady, M. A., Del Barrio, E. P., & Sommier, A. (2015) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2014.10.012 · Cited by 161
Corrosion effect of phase change materials in solar thermal energy storage application
Vasu, A., Hagos, F. Y., Noor, M. M., Mamat, R., Azmi, W. H., Abdullah, A. A., & Ibrahim, T. K. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.03.018 · Cited by 160
Zhang, N., Yuan, Y., Yuan, Y., Li, T., & Cao, X. (2014) · Energy and Buildings · doi:10.1016/j.enbuild.2014.07.049 · Cited by 158
Self-citationWaste Energy Harvesting: Mechanical and Thermal Energies
Kong, L. B., Li, T., Hng, H. H., Boey, F. Y. C., Zhang, T., & Li, S. (2014) · Lecture notes in energy · doi:10.1007/978-3-642-54634-1 · Cited by 156
Song, S., Dong, L., Chen, S., Xie, H., & Xiong, C. (2014) · Energy Conversion and Management · doi:10.1016/j.enconman.2014.02.045 · Cited by 154
Super-cooling prevention of microencapsulated phase change material
Fan, Y., Zhang, X. X., Wang, X. C., Li, J., & Zhu, Q. (2003) · Thermochimica Acta · doi:10.1016/j.tca.2003.11.006 · Cited by 154
Zhang, H., Gao, X., Chen, C., Xu, T., Fang, Y., & Zhang, Z. (2016) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2016.04.024 · Cited by 153
Self-citationWi, S., Seo, J., Jeong, S., Chang, S. J., Kang, Y., & Kim, S. (2015) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2015.06.040 · Cited by 152
Aydın, A. A., & Okutan, H. (2011) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2011.04.015 · Cited by 151
Elarga, H., Goia, F., Zarrella, A., Monte, A. D., & Benini, E. (2016) · Solar Energy · doi:10.1016/j.solener.2016.06.074 · Cited by 150
Zhang, Q., Wang, H., Ling, Z., Fang, X., & Zhang, Z. (2015) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2015.04.008 · Cited by 149
Self-citationZeng, J., Gan, J., Zhu, F., Yu, S., Xiao, Z., Yan, W.-P., Zhu, L., Liu, Z., Sun, L., & Cao, Z. Y. (2014) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2014.04.015 · Cited by 149
Wang, S., Qin, P., Fang, X., Zhang, Z., Wang, S., & Liu, X. (2013) · Solar Energy · doi:10.1016/j.solener.2013.11.018 · Cited by 149
Self-citationThermal performance of a PCM heat sink under different heat loads: An experimental study
Baby, R., & Balaji, C. (2014) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2013.12.018 · Cited by 148
Zhang, N., Yuan, Y., Du, Y., Cao, X., & Yuan, Y. (2014) · Energy · doi:10.1016/j.energy.2014.10.092 · Cited by 146
Self-citationChen, K., Yu, X., Tian, C., & Wang, J. (2013) · Energy Conversion and Management · doi:10.1016/j.enconman.2013.09.015 · Cited by 144
Gao, C., Kuklane, K., & Holmér, I. (2010) · European Journal of Applied Physiology · doi:10.1007/s00421-010-1748-4 · Cited by 143
Yazıcı, M. Y., Avcı, M., Aydın, O., & Akgün, M. (2014) · Solar Energy · doi:10.1016/j.solener.2014.01.007 · Cited by 142
Zhang, N., Yuan, Y., Yuan, Y., Cao, X., & Yang, X. (2014) · Solar Energy · doi:10.1016/j.solener.2014.09.003 · Cited by 142
Self-citationLatent heat storage with tubular-encapsulated phase change materials (PCMs)
Zhang, H.-L., Baeyens, J., Degrève, J., Cáceres, G., Segal, R., & Pitié, F. (2014) · Energy · doi:10.1016/j.energy.2014.03.067 · Cited by 142
Theoretic Prediction of Melting Temperature and Latent Heat for a Fatty Acid Eutectic Mixture
Yanping, Y., Wenquan, T., Xiaoling, C., & Li, B. (2011) · Journal of Chemical & Engineering Data · doi:10.1021/je200057j · Cited by 142
Wu, S., Li, T., Yan, T., Dai, Y., & Wang, R. Z. (2016) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2016.06.066 · Cited by 142
Ye, R., Lin, W., Yuan, K., Fang, X., & Zhang, Z. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.02.049 · Cited by 142
Self-citationDuan, Z.-J., Zhang, H.-Z., Sun, L., Cao, Z. Y., Xu, F., Zou, Y., Chu, H., Qiu, S., Xiang, C., & Zhou, H. (2013) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-013-3311-0 · Cited by 141
Sobolčiak, P., Karkri, M., Al‐Maadeed, M. A. A., & Krupa, I. (2015) · Renewable Energy · doi:10.1016/j.renene.2015.11.056 · Cited by 139
Huang, X. Y., Alva, G., Liu, L., & Fang, G. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.05.074 · Cited by 139
Griffiths, P. W., & Eames, P. (2006) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2006.07.009 · Cited by 138
Zhang, L., Zhu, J., Zhou, W., Wang, J., & Wang, Y. (2012) · Energy · doi:10.1016/j.energy.2012.01.011 · Cited by 138
Gu, Z., Liu, H., & Li, Y. (2004) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2004.03.017 · Cited by 136
Borreguero, A. M., Sánchez-Silva, L., Valverde, J. L., Carmona, M., & Rodríguez, J. F. (2010) · Applied Energy · doi:10.1016/j.apenergy.2010.08.014 · Cited by 136
Cao, X., Yuan, Y., Xiang, B., Sun, L., & Xingxing, Z. (2017) · Energy and Buildings · doi:10.1016/j.enbuild.2017.10.029 · Cited by 135
Self-citationDevelopment of microencapsulated phase change material for solar thermal energy storage
Su, W., Darkwa, J., & Kokogiannakis, G. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.11.009 · Cited by 134
Li, X., Zhou, Y., Nian, H., Zhang, X., Dong, O., Ren, X., Zeng, J., Hai, C., & Shen, Y. (2017) · Energy & Fuels · doi:10.1021/acs.energyfuels.7b00851 · Cited by 134
Qiu, Z., Zhao, X., Li, P., Zhang, X., Ali, S., & Tan, J. (2015) · Energy · doi:10.1016/j.energy.2015.05.040 · Cited by 131
Aksoy, S. A., Alkan, C., & Göde, F. (2011) · Thermochimica Acta · doi:10.1016/j.tca.2011.01.014 · Cited by 131
Salaün, F., Bedek, G., Devaux, É., Dupont, D., & Gengembre, L. (2010) · Journal of Membrane Science · doi:10.1016/j.memsci.2010.11.033 · Cited by 129
Wen, R., Huang, Z., Huang, Y., Zhang, X., Min, X., Fang, M., Liu, Y., & Wu, X. (2016) · Energy and Buildings · doi:10.1016/j.enbuild.2016.01.023 · Cited by 129
Yuan, Y., Zhang, N., Li, T., Cao, X., & Long, W. (2016) · Energy · doi:10.1016/j.energy.2015.12.115 · Cited by 128
Self-citationNithyanandam, K., & Pitchumani, R. (2012) · Applied Energy · doi:10.1016/j.apenergy.2012.09.056 · Cited by 126
Sánchez-Silva, L., Sánchez, P., Carmona, M., de Lucas, A., & Rodríguez, J. F. (2008) · Colloid & Polymer Science · doi:10.1007/s00396-008-1864-4 · Cited by 126
Silva, T., Vicente, R., Amaral, C., & Figueiredo, A. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.06.126 · Cited by 125
Lee, S., Shin, H. K., Park, M., Rhee, K. Y., & Park, S. (2013) · Carbon · doi:10.1016/j.carbon.2013.09.053 · Cited by 123
A novel PCM of lauric–myristic–stearic acid/expanded graphite composite for thermal energy storage
Liu, C., Yuan, Y., Zhang, N., Cao, X., & Yang, X. (2014) · Materials Letters · doi:10.1016/j.matlet.2014.01.051 · Cited by 121
Self-citationSu, J., Wang, L., Ren, L., Huang, Z., & Meng, X. (2006) · Journal of Applied Polymer Science · doi:10.1002/app.25001 · Cited by 118
Alkan, C., Kaya, K., & Sarı, A. (2009) · Journal of Polymers and the Environment · doi:10.1007/s10924-009-0146-7 · Cited by 116
Zhang, Y., Wang, X., & Wu, D. (2014) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2014.10.035 · Cited by 116
Xu, T., Chen, Q., Huang, G., Zhang, Z., Gao, X., & Lu, S.-S. (2016) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2016.06.003 · Cited by 116
Self-citationYuan, Y., Gao, X., Wu, H., Zhang, Z., Cao, X., Sun, L., & Yu, N. (2016) · Energy · doi:10.1016/j.energy.2016.11.058 · Cited by 116
Self-citationTao, Y. B., He, Y. L., & Qu, Z. (2012) · Solar Energy · doi:10.1016/j.solener.2012.01.004 · Cited by 113
He, F., Wang, X., & Wu, D. (2014) · Renewable Energy · doi:10.1016/j.renene.2014.08.079 · Cited by 112
Singh, D., Kim, T., Zhao, W., Yu, W., & France, D. M. (2016) · Renewable Energy · doi:10.1016/j.renene.2016.03.090 · Cited by 112
Morphologies and thermal characterization of paraffin/carbon foam composite phase change material
Xiao, X., & Zhang, P. (2013) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2013.06.037 · Cited by 111
Xia, Y. P., & Zhang, X. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.11.133 · Cited by 109
Photovoltaic module temperature stabilization with the use of phase change materials
Klugmann-Radziemska, E., & Wcisło, P. (2017) · Solar Energy · doi:10.1016/j.solener.2017.05.016 · Cited by 108
Zhao, J., Rao, Z., Liu, C., & Li, Y. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.09.018 · Cited by 107
Latibari, S. T., Mehrali, M., Mehrali, M., Afifi, A. M., Mahlia, T. M. I., Akhiani, A. R., & Metselaar, H. S. C. (2015) · Energy · doi:10.1016/j.energy.2015.04.008 · Cited by 107
Wen, R., Zhang, X., Huang, Y., Yin, Z., Huang, Z., Fang, M., Liu, Y., & Wu, X. (2017) · Energy and Buildings · doi:10.1016/j.enbuild.2017.01.025 · Cited by 107
Genetic optimization of a PCM enhanced storage tank for Solar Domestic Hot Water Systems
Padovan, R., & Manzan, M. (2014) · Solar Energy · doi:10.1016/j.solener.2013.12.034 · Cited by 106
Silva, T., Vicente, R., Rodrigues, F., Samagaio, A., & Cardoso, C. (2014) · Energy and Buildings · doi:10.1016/j.enbuild.2014.11.053 · Cited by 103
Zhao, J., Rao, Z., Liu, C., & Li, Y. (2016) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2016.03.108 · Cited by 103
Kim, D., Jung, J., Kim, Y., Lee, M., Seo, J., & Khan, S. B. (2016) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2015.12.049 · Cited by 102
Shang, S., Xie, Y., Li, M., Yuan, Y., Yu, J., Wu, H., Liu, B., & Liu, N. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.01.069 · Cited by 102
Self-citationJet impingement and spray cooling using slurry of nanoencapsulated phase change materials
Wu, W., Bostanci, H., Chow, L. C., Ding, S., Hong, Y., Su, M., Kizito, J. P., Gschwender, L. J., & Snyder, C. E. (2011) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2011.03.022 · Cited by 101
Khan, Z., Khan, Z. A., & Tabeshf, K. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.09.030 · Cited by 101
Sarı, A. (2005) · Energy Conversion and Management · doi:10.1016/j.enconman.2005.07.005 · Cited by 100
Cai, Y., Ke, H., Liang, L. G., Fei, X., Weı, Q., Song, L., Hu, Y. Z., & Fong, H. (2012) · Energy Conversion and Management · doi:10.1016/j.enconman.2012.04.018 · Cited by 99
Tang, X., Li, W., Zhang, X., & Shi, H. (2014) · Energy · doi:10.1016/j.energy.2014.03.002 · Cited by 99
Zhan, S., Chen, S., Chen, L., & Hou, W. (2016) · Powder Technology · doi:10.1016/j.powtec.2016.02.007 · Cited by 98
Khadiran, T., Hussein, M. Z., Zainal, Z., & Rusli, R. (2015) · Journal of the Taiwan Institute of Chemical Engineers · doi:10.1016/j.jtice.2015.03.028 · Cited by 96
Tian, H., Wang, W., Ding, J., Wei, X., & Huang, C. (2016) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2015.12.038 · Cited by 96
Mehrali, M., Latibari, S. T., Mehrali, M., Mahlia, T. M. I., & Metselaar, H. S. C. (2014) · Energy Conversion and Management · doi:10.1016/j.enconman.2014.08.014 · Cited by 93
Cai, Y., Hu, Y. Z., Song, L., Tang, Y. Z., Yang, R. C., Zhang, Y., Chen, Z., & Fan, W. (2005) · Journal of Applied Polymer Science · doi:10.1002/app.22065 · Cited by 93
A facile synthesis of solid-solid phase change material for thermal energy storage
Kong, W., Fu, X., Liu, Z., Zhou, C., & Lei, J. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.10.088 · Cited by 91
Jiang, Y., Sun, Y., Bruno, F., & Li, S. (2017) · Thermochimica Acta · doi:10.1016/j.tca.2017.01.002 · Cited by 91
Dao, T. D., & Jeong, H. M. (2015) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2015.02.009 · Cited by 89
Yuan, Y., Li, T., Zhang, N., Cao, X., & Yang, X. (2015) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-015-5173-0 · Cited by 86
Self-citationSurface area of compressed expanded graphite
Celzard, A., Mareche, J. F., & Furdin, G. (2002) · Carbon · doi:10.1016/s0008-6223(02)00183-5 · Cited by 84
Wang, Y., Zheng, H. Y., Feng, H. X., & Zhang, D. Y. (2011) · Energy and Buildings · doi:10.1016/j.enbuild.2011.12.021 · Cited by 84
Delgado, M., Lázaro, A., Peñalosa, C., & Zalba, B. (2013) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2013.10.011 · Cited by 83
Wang, Z., Situ, W., Li, X., Zhang, G., Huang, Z., Yuan, W., Yang, C., & Yang, C. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.05.179 · Cited by 82
Thermal characterizations of the graphite nanosheets reinforced paraffin phase-change composites
Chen, Y.-J., Nguyen, D.-D., Shen, M., Yip, M., & Tai, N. (2012) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2012.08.010 · Cited by 81
Research works printed but not linked: 20
- Y.Zhang Energy Storage: Theory and Application Press of University of Science and Technology of China Hefei1996.
- Sun Q., 2017, J. Therm. Anal. Calorim, 2, 1
- Zhang H., 2017, J. Appl. Polym. Sci, 45446, 1
- Karaipekli A., 2007, J. Sci. Ind. Res, 66, 470
- B. M.Gibbs S. M.Hasnain Proceedings of the 1995 ASME/JSME/JSEJ International Solar Energy Conference Part 2 1995.
- 10.1016/j.applthermaleng.2005.01.010 · DOI · Paper page
- Zhang Z., 2016, J. Therm. Anal. Calorim, 128, 1
- 10.1016/j.ijheatmasstransfer.2010.03.035 · DOI · Paper page
- 10.1016/j.enconman.2005.03.004 · DOI · Paper page
- 10.1016/j.solener.2014.05.019 · DOI · Paper page
- 10.1016/j.solmat.2014.04.015 · DOI
- 10.1016/j.enconman.2015.05.006 · DOI · Paper page
- 10.1016/j.applthermaleng.2013.08.035 · DOI · Paper page
- Sari A., 2006, Indian J. Eng. Mater. Sci, 13, 253
- Poshadri A., 2010, J. Res. Angrau, 38, 86
- Liu H., 2005, Refrig. J, 1, 1
- Zhang G., 2012, Adv. Sci, 4, 484
- Viswanath R., 2000, Intel. Corporation Tech. Rep, 3, 1
- Tarabsheh A. A., 2013, Chem. Eng. Trans, 35, 1387
- Colvin D. P., 1998, Advances in Heat and Mass Transfer in Biotechnology (HTD), 123
Cited by
Umair, M. M., Zhang, Y., Iqbal, K., Zhang, S., & Tang, B. (2019) · Applied Energy · doi:10.1016/j.apenergy.2018.11.017 · Cited by 852
Carbon-Based Composite Phase Change Materials for Thermal Energy Storage, Transfer, and Conversion
Chen, X., Cheng, P., Tang, Z., Xu, X., Gao, H., & Wang, G. (2021) · Advanced Science · doi:10.1002/advs.202001274 · Cited by 483
Advances in thermal energy storage: Fundamentals and applications
Ali, H. M., Rehman, T.-U., Arıcı, M., Said, Z., Duraković, B., Mohammed, H. I., Kumar, R., Rathod, M. K., Buyukdagli, O., & Teggar, M. (2024) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2023.101109 · Cited by 457
Wu, M. Q., Wu, S., Cai, Y. F., Wang, R. Z., & Li, T. X. (2021) · Energy Storage Materials · doi:10.1016/j.ensm.2021.07.019 · Cited by 409
Li, Z., Lu, Y., Huang, R., Chang, J., Yu, X., Jiang, R., Yu, X., & Roskilly, A. P. (2021) · Applied Energy · doi:10.1016/j.apenergy.2020.116277 · Cited by 342
Metadata
- Authors
- Zhang, N., Yuan, Y., Cao, X., Du, Y., Zhang, Z., & Gui, Y.
- Affiliations
- China Aerodynamics Research and Development Center (CN)
- Southwest Jiaotong University (CN)
- Corresponding author
- Yuan, Yanping
- Venue
- Advanced Engineering Materials
- Publisher
- Wiley
- Published
- 2018-01-15
- Volume
- 20
- Issue
- 6
- ISSN
- 1438-1656 (ISSN-L)
- 1527-2648
- OpenAlex
- W2784082812
- Cited by
- 504
- References
- 261
- Citations by year
- 2026: 54 · 2025: 61 · 2024: 71 · 2023: 59 · 2022: 69 · 2021: 56 · 2020: 65 · 2019: 41 · 2018: 28
- FWCI
- 30.33
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Advanced Engineering Materials (publishedVersion)
- Funders
- National Natural Science Foundation of China (51678488, 11472295)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Phase Change Materials Research
- Physical Sciences › Engineering › Mechanical Engineering › Adsorption and Cooling Systems
- Physical Sciences › Materials Science › Materials Chemistry › Thermal properties of materials
- Keywords
- latent heat storage, solid-liquid phase change materials, thermal conductivity enhancement, heat transfer enhancement, liquid leakage, microencapsulated phase change materials, thermal control system
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.