The DOI matches its Crossref record; 26 of the 26 references it cites were found in a registry or an index.
Exploring the Nickel–Graphene Nanocomposite Coatings for Superior Corrosion Resistance: Manipulating the Effect of Deposition Current Density on its Morphology, Mechanical Properties, and Erosion‐Corrosion Performance
Abstract
The use of graphene‐based composite as anti‐corrosion and protective coatings for metallic materials is still a provocative topic worthy of debate. Nickel–graphene nanocomposite coatings have been successfully fabricated onto the mild steel by electrochemical co‐deposition technique. This research demonstrates the properties of nickel–graphene composite coatings influenced by different electrodeposition current densities. The effect of deposition current density on the; surface morphologies, composition, microstructures, grain sizes, mechanical, and electrochemical properties of the composite coatings are executed. The coarseness of deposited coatings increases with the increasing of deposition current density. The carbon content in the composite coatings increases first and then decreases by further increasing of current density. The improved mechanical properties and superior anti‐corrosion performance of composite coatings are obtained at the peak value of current density of 9 A dm−2. The incorporation of graphene sheets into nickel metal matrix lead to enhance the micro hardness, surface roughness, and adhesion strength of produced composite coatings. Furthermore, the presence of graphene in composite coating exhibits the reduced grain sizes and the enhanced erosion–corrosion resistance properties.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Geim, A. K., & Novoselov, K. S. (2007) · Nature Materials · doi:10.1038/nmat1849 · Cited by 39,979
Synthesis of graphene-based nanosheets via chemical reduction of exfoliated graphite oxide
Stankovich, S., Dikin, D. A., Piner, R. D., Kohlhaas, K. A., Kleinhammes, A., Jia, Y., Wu, Y., Nguyen, S. T., & Ruoff, R. S. (2007) · Carbon · doi:10.1016/j.carbon.2007.02.034 · Cited by 13,878
Graphene-based composite materials
Stankovich, S., Dikin, D. A., Dommett, G. H. B., Kohlhaas, K. M., Zimney, E. J., Stach, E. A., Piner, R. D., Nguyen, S. T., & Ruoff, R. S. (2006) · Nature · doi:10.1038/nature04969 · Cited by 12,922
Improved Synthesis of Graphene Oxide
Marcano, D. C., Kosynkin, D. V., Berlin, J. M., Sinitskii, A., Sun, Z., Slesarev, A., Alemany, L. B., Lu, W., & Tour, J. M. (2010) · ACS Nano · doi:10.1021/nn1006368 · Cited by 11,989
Huang, X., Qi, X., Boey, F., & Zhang, H. (2012) · Chem. Soc. Rev. · doi:10.1039/c1cs15078b · Cited by 3,837
Graphene based materials: Past, present and future
Singh, V., Joung, D., Zhai, L., Das, S., Khondaker, S. I., & Seal, S. (2011) · Progress in Materials Science · doi:10.1016/j.pmatsci.2011.03.003 · Cited by 3,556
Reduced graphene oxide by chemical graphitization
Moon, I. K., Lee, J., Ruoff, R. S., & Lee, H. (2010) · Nature Communications · doi:10.1038/ncomms1067 · Cited by 2,135
Kinetics of the Deposition of Inert Particles from Electrolytic Baths
Guglielmi, N. (1972) · Journal of The Electrochemical Society · doi:10.1149/1.2404383 · Cited by 889
Novel anticorrosion coatings prepared from polyaniline/graphene composites
Chang, C.-H., Huang, T.-C., Peng, C.-W., Yeh, T.-C., Lu, H.-I., Hung, W.-I., Weng, C.-J., Yang, T.-I., & Yeh, J.-M. (2012) · Carbon · doi:10.1016/j.carbon.2012.06.043 · Cited by 728
Graphene based metal and metal oxide nanocomposites: synthesis, properties and their applications
Khan, M., Tahir, M. N., Adil, S. F., Khan, H. U., Siddiqui, M. R. H., Al-warthan, A. A., & Tremel, W. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta02240a · Cited by 709
Ramezanzadeh, B., Haeri, Z., & Ramezanzadeh, M. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.06.028 · Cited by 512
An, S. J., Zhu, Y., Lee, S. H., Stoller, M. D., Emilsson, T., Park, S., Velamakanni, A., An, J., & Ruoff, R. S. (2010) · The Journal of Physical Chemistry Letters · doi:10.1021/jz100080c · Cited by 498
Liu, C., Wang, K., Luo, S., Tang, Y., & Chen, L. (2011) · Small · doi:10.1002/smll.201002340 · Cited by 405
Self-citationEffect of nanocrystalline grain size on the electrochemical and corrosion behavior of nickel
Mishra, R. S., & Balasubramaniam, R. (2004) · Corrosion Science · doi:10.1016/j.corsci.2004.04.007 · Cited by 339
Ramezanzadeh, B., Mohamadzadeh Moghadam, M. H., Shohani, N., & Mahdavian, M. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.03.061 · Cited by 338
Corrosion behavior of carbon nanotubes–Ni composite coating
Chen, X., Chen, C. S., Xiao, H., Cheng, F., Zhang, G., & Yi, G. J. (2004) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2004.04.055 · Cited by 322
Shi, L., Sun, C., Gao, P., Zhou, F., & Liu, W. (2005) · Applied Surface Science · doi:10.1016/j.apsusc.2005.05.035 · Cited by 317
Jabbar, A., Yasin, G., Khan, W. Q., Anwar, M. Y., Korai, R. M., Nizam, M. N., & Muhyodin, G. (2017) · RSC Advances · doi:10.1039/c6ra28755g · Cited by 268
Self-citationKuang, D., Xu, L., Liu, L., Hu, W., & Wu, Y. (2013) · Applied Surface Science · doi:10.1016/j.apsusc.2013.02.066 · Cited by 266
Singh, B. P., Jena, B. K., Bhattacharjee, S., & Besra, L. (2013) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2013.06.004 · Cited by 266
Kim, H. J., Lee, S.-M., Oh, Y.-S., Yang, Y.-H., Lim, Y. S., Yoon, D. H., Lee, C., Kim, J.-Y., & Ruoff, R. S. (2014) · Scientific Reports · doi:10.1038/srep05176 · Cited by 243
Chen, L., Wang, L., Zeng, Z., & Xu, T. (2006) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2005.12.008 · Cited by 197
Mechanical properties of nickel-graphene composites synthesized by electrochemical deposition
Ren, Z., Meng, N., Shehzad, K., Xu, Y., Qu, S., Yu, B., & Luo, J. (2015) · Nanotechnology · doi:10.1088/0957-4484/26/6/065706 · Cited by 158
Effects of surfactants on electrodeposition of nickel-carbon nanotubes composite coatings
Guo, C., Zuo, Y., Zhao, X., Zhao, J., & Xiong, J. (2007) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2007.12.005 · Cited by 127
Self-citationLi, M., Liu, Q., Jia, Z., Xu, X., Shi, Y., Cheng, Y., Zheng, Y., Xi, T., & Wei, S. (2013) · Applied Surface Science · doi:10.1016/j.apsusc.2013.08.012 · Cited by 94
Multiscale patterning of graphene oxide and reduced graphene oxide for flexible supercapacitors
Xue, Y., Zhu, L., Chen, H., Qu, J., & Dai, L. (2015) · Carbon · doi:10.1016/j.carbon.2015.04.046 · Cited by 83
Cited by
Graphene-based nano composites and their applications. A review
Lawal, A. T. (2019) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2019.111384 · Cited by 344
Metadata
- Authors
- Yasin, G., Arif, M., Shakeel, M., Dun, Y., Zuo, Y., Khan, W. Q., Tang, Y., Khan, A., & Nadeem, M.
- Venue
- Advanced Engineering Materials
- Publisher
- Wiley
- Published
- 2018-04-23
- Volume
- 20
- Issue
- 7
- ISSN
- 1438-1656 (ISSN-L)
- 1527-2648
- OpenAlex
- W2802708669
- Cited by
- 314
- References
- 26
- FWCI
- 8.84
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.