The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Roll‐to‐Roll Fabrication of Solution Processed Electronics
Open accessAbstract
The production of electronic devices using solution based (“wet”) deposition technologies has some decisive technical and commercial advantages compared to competing approaches like vacuum based (“dry”) manufacturing. Particularly, the potential to scale up production processes to large areas and high volumes by introducing continuous roll‐to‐roll (R2R) methods on flexible substrates has been the topic of intense studies from both applied research institutes and industry already for some years. Decisive steps forward have been achieved during that time, resulting in the dawn of commercial applications for a number of processes, while additional development work is still needed in some other fields. This review summarizes the work published during the last few years on the R2R printing and wet coating of electronic devices. An overview is presented of the basic operational principles for the most commonly used R2R printing and coating methods and techniques for proper web handling in R2R lines. Then, the most commonly used types of flexible substrate materials are introduced, followed by a review of the work published in the application areas of transparent conductor materials, printed electric connections, light emitting devices, photovoltaic energy generation, printed logic, and sensing.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Technologies for Printing Sensors and Electronics Over Large Flexible Substrates: A Review
Khan, S., Lorenzelli, L., & Dahiya, R. S. (2015) · IEEE Sensors Journal · doi:10.1109/jsen.2014.2375203 · Cited by 1,225
A fully roll-to-roll gravure-printed carbon nanotube-based active matrix for multi-touch sensors
Lee, W., Koo, H., Sun, J., Noh, J., Kwon, K.-S., Yeom, C., Choi, Y., Chen, K., Javey, A., & Cho, G. (2015) · Scientific Reports · doi:10.1038/srep17707 · Cited by 130
Cited by
Organic Solar Cells—The Path to Commercial Success
Riede, M., Spoltore, D., & Leo, K. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202002653 · Cited by 512
Huang, Q., & Zhu, Y. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201800546 · Cited by 482
Yao, S., Ren, P., Song, R., Liu, Y., Huang, Q., Dong, J., O'Connor, B. T., & Zhu, Y. (2020) · Advanced Materials · doi:10.1002/adma.201902343 · Cited by 324
Roll‐to‐Roll Slot Die Coated Perovskite for Efficient Flexible Solar Cells
Galagan, Y., Di Giacomo, F., Gorter, H., Kirchner, G., de Vries, I., Andriessen, R., & Groen, P. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201801935 · Cited by 259
Self-citation
Metadata
- Authors
- Abbel, R., Galagan, Y., & Groen, P.
- Venue
- Advanced Engineering Materials
- Publisher
- Wiley
- Published
- 2018-04-30
- Volume
- 20
- Issue
- 8
- ISSN
- 1438-1656 (ISSN-L)
- 1527-2648
- OpenAlex
- W2801427030
- Cited by
- 173
- References
- 2
- FWCI
- 6.21
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.