The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Understanding and Improving Mechanical Properties in 3D printed Parts Using a Dual‐Cure Acrylate‐Based Resin for Stereolithography
Open accessAbstract
Application of 3D printed structures via stereolithography (SLA) is limited by imprecise dimensional control and inferior mechanical properties. These challenges is attributed to poor understanding of polymerization behavior during the printing process and inadequate post‐processing methods. The former via a modified version of Jacob's working curve equation that incorporates the resin's sub‐linear response to irradiation intensity is addressed by the authors. This new model provides a more accurate approach to select 3D printing parameters given a desired z‐resolution and conversion profile along the depth of the printed part. The authors use this improved model to motivate a novel material design that can be post‐processed to be indistinguishable from the polymer at 100% conversion. This approach employs a dual initiating system in which photo‐initiated printing is followed by a thermal post‐cure to achieve uniform conversion. The authors show that this approach enables fast printing times (10 s per layer), exceptional horizontal resolution (1–10 microns), precise control over vertical resolution, and decreased surface corrugations on a 10's of microns scale. The techniques described herein use an acrylate‐based SLA resin, but the approach can be extended to other monomer systems to simultaneously achieve predictable properties and dimensions that are critical for application of additive manufacturing in load‐bearing applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Employing Theories Far beyond Their Limits—The Case of the (Boguer‐) Beer–Lambert Law
Mayerhöfer, T. G., Mutschke, H., & Popp, J. (2016) · ChemPhysChem · doi:10.1002/cphc.201600114 · Cited by 201
Cited by
4D Printing of Hydrogels: A Review
Champeau, M., Heinze, D. A., Viana, T. N., de Souza, E. R., Chinellato, A. C., & Titotto, S. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201910606 · Cited by 443
Vat photopolymerization 3D printing for advanced drug delivery and medical device applications
Xu, X., Awad, A., Robles-Martinez, P., Gaisford, S., Goyanes, A., & Basit, A. W. (2021) · Journal of Controlled Release · doi:10.1016/j.jconrel.2020.10.008 · Cited by 370
Ryan, K. R., Down, M. P., & Banks, C. E. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.126162 · Cited by 338
Post-processing treatments to enhance additively manufactured polymeric parts: A review
Tamburrino, F., Barone, S., Paoli, A., & Razionale, A. V. (2021) · Virtual and Physical Prototyping · doi:10.1080/17452759.2021.1917039 · Cited by 119
“In (Uzcategui et al. 2018), a dual-cured method for an acrylate resin manufactured through SLA was developed.”
BackgroundMethod
Metadata
- Authors
- Uzcategui, A. C., Muralidharan, A., Ferguson, V. L., Bryant, S. J., & McLeod, R. R.
- Venue
- Advanced Engineering Materials
- Publisher
- Wiley
- Published
- 2018-09-20
- Volume
- 20
- Issue
- 12
- ISSN
- 1438-1656 (ISSN-L)
- 1527-2648
- OpenAlex
- W2890191077
- Cited by
- 174
- References
- 1
- FWCI
- 6.96
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.