The DOI matches its Crossref record; 14 of the 14 references it cites were found in a registry or an index.
High Performance Nanotube‐Reinforced Plastics: Understanding the Mechanism of Strength Increase
Abstract
Polymer–multiwalled carbon nanotube composite films were fabricated using two types of polymer matrices, namely poly(vinyl alcohol), (PVA) and chlorinated polypropylene. In the first case, the PVA was observed to form a crystalline coating around the nanotubes, maximising interfacial stress transfer. In the second case the interface was engineered by covalently attaching chlorinated polypropylene chains to the nanotubes, again resulting in large stress transfer. Increases in Young's modulus, tensile strength, and toughness of × 3.7, × 4.3, and × 1.7, respectively were observed for the PVA‐based materials at less than 1 wt.‐% nanotubes. Similarily for the polypropylene‐based composites, increases in Young's modulus, tensile strength and toughness of × 3.1, × 3.9, and × 4.4, respectively, were observed at equivalent nanotube loading levels. In addition, a model to describe composite strength was derived. This model shows that the tensile strength increases in proportion to the thickness of the interface region. This suggests that composite strength can be optimized by maximising the thickness of the crystalline coating or the thickness of the interfacial volume partially occupied by functional groups.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Helical microtubules of graphitic carbon
Iijima, S. (1991) · Nature · doi:10.1038/354056a0 · Cited by 43,098
Carbon Nanotubes--the Route Toward Applications
Baughman, R. H., Zakhidov, A. A., & de Heer, W. A. (2002) · Science · doi:10.1126/science.1060928 · Cited by 10,267
Exceptionally high Young's modulus observed for individual carbon nanotubes
Treacy, M. M. J., Ebbesen, T. W., & Gibson, J. M. (1996) · Nature · doi:10.1038/381678a0 · Cited by 5,428
Ultra-low electrical percolation threshold in carbon-nanotube-epoxy composites
Sandler, J. K. W., Kirk, J. E., Kinloch, I. A., Shaffer, M. S. P., & Windle, A. H. (2003) · Polymer · doi:10.1016/s0032-3861(03)00539-1 · Cited by 1,699
Carbon nanotube composites for thermal management
Biercuk, M. J., Llaguno, M. C., Radosavljevic, M., Hyun, J. K., Johnson, A. T., & Fischer, J. E. (2002) · Applied Physics Letters · doi:10.1063/1.1469696 · Cited by 1,552
Super-tough carbon-nanotube fibres
Dalton, A. B., Collins, S., Muñoz, E., Razal, J. M., Ebron, V. H., Ferraris, J. P., Coleman, J. N., Kim, B. G., & Baughman, R. H. (2003) · Nature · doi:10.1038/423703a · Cited by 1,521
Self-citationFabrication and Characterization of Carbon Nanotube/Poly(vinyl alcohol) Composites
Shaffer, M. S. P., & Windle, A. H. (1999) · Advanced Materials · doi:10.1002/(sici)1521-4095(199908)11:11<937::aid-adma937>3.0.co;2-9 · Cited by 1,184
Kilbride, B. E., Coleman, J. N., Fraysse, J., Fournet, P., Cadek, M., Drury, A., Hutzler, S., Roth, S., & Blau, W. J. (2002) · Journal of Applied Physics · doi:10.1063/1.1506397 · Cited by 789
Self-citationCadek, M., Coleman, J. N., Barron, V., Hedicke, K., & Blau, W. J. (2002) · Applied Physics Letters · doi:10.1063/1.1533118 · Cited by 650
Self-citationMeasurement of carbon nanotube–polymer interfacial strength
Barber, A. H., Cohen, S. R., & Wagner, H. D. (2003) · Applied Physics Letters · doi:10.1063/1.1579568 · Cited by 540
Cited by
Tasis, D., Tagmatarchis, N., Bianco, A., & Prato, M. (2006) · Chemical Reviews · doi:10.1021/cr050569o · Cited by 4,273
Small but strong: A review of the mechanical properties of carbon nanotube–polymer composites
Coleman, J. N., Khan, U., Blau, W. J., & Gun’ko, Y. K. (2006) · Carbon · doi:10.1016/j.carbon.2006.02.038 · Cited by 4,071
Self-citationCarbon nanotube–polymer composites: Chemistry, processing, mechanical and electrical properties
Spitalsky, Z., Tasis, D., Papagelis, K., & Galiotis, C. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.09.003 · Cited by 3,125
Hussain, F., Hojjati, M., Okamoto, M., & Gorga, R. E. (2006) · Journal of Composite Materials · doi:10.1177/0021998306067321 · Cited by 2,227
Mechanical Reinforcement of Polymers Using Carbon Nanotubes
Coleman, J. N., Khan, U., & Gun'ko, Y. K. (2006) · Advanced Materials · doi:10.1002/adma.200501851 · Cited by 1,621
Self-citationLiang, J., Huang, Y., Zhang, L., Wang, Y., Ma, Y., Guo, T., & Chen, Y. (2009) · Advanced Functional Materials · doi:10.1002/adfm.200801776 · Cited by 1,605
Carbon nanotube reinforced metal matrix composites - a review
Bakshi, S. R., Lahiri, D., & Agarwal, A. (2010) · International Materials Reviews · doi:10.1179/095066009x12572530170543 · Cited by 1,446
Recent Advances in Research on Carbon Nanotube–Polymer Composites
Byrne, M. T., & Gun'ko, Y. K. (2010) · Advanced Materials · doi:10.1002/adma.200901545 · Cited by 873
Self-citationZhang, Q., Huang, J., Qian, W., Zhang, Y., & Wei, F. (2013) · Small · doi:10.1002/smll.201203252 · Cited by 759
Covalent functionalization of chemically converted graphene sheets via silane and its reinforcement
Yang, H., Li, F., Shan, C., Han, D., Zhang, Q., Niu, L., & Ivaska, A. (2009) · Journal of Materials Chemistry · doi:10.1039/b901421g · Cited by 752
Polymer Nanocomposites—A Comparison between Carbon Nanotubes, Graphene, and Clay as Nanofillers
Bhattacharya, M. (2016) · Materials · doi:10.3390/ma9040262 · Cited by 747
Strong and ductile poly(vinyl alcohol)/graphene oxide composite films with a layered structure
Xu, Y., Hong, W., Bai, H., Li, C., & Shi, G. (2009) · Carbon · doi:10.1016/j.carbon.2009.08.022 · Cited by 732
Han, D., Yan, L., Chen, W., & Li, W. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2010.08.038 · Cited by 569
Preparation of High Concentration Dispersions of Exfoliated MoS2 with Increased Flake Size
O’Neill, A., Khan, U., & Coleman, J. N. (2012) · Chemistry of Materials · doi:10.1021/cm301515z · Cited by 565
Self-citationReview of the mechanical properties of carbon nanofiber/polymer composites
Al-Saleh, M. H., & Sundararaj, U. (2011) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2011.08.005 · Cited by 496
Recent advance in functionalized graphene/polymer nanocomposites
Cai, D., & Song, M. (2010) · Journal of Materials Chemistry · doi:10.1039/c0jm00530d · Cited by 494
Mechanical properties of high density polyethylene/carbon nanotube composites
Kanagaraj, S., Varanda, F. R., Zhil’tsova, T. V., Oliveira, M. S. A., & Simões, J. A. O. (2007) · Composites Science and Technology · doi:10.1016/j.compscitech.2007.04.024 · Cited by 456
Preparation and properties of microfibrillated cellulose polyvinyl alcohol composite materials
Lu, J., Wang, T., & Drzal, L. T. (2008) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2008.02.003 · Cited by 414
Nano-indentation studies on polymer matrix composites reinforced by few-layer graphene
Das, B., Eswar Prasad, K., Ramamurty, U., & Rao, C. N. R. (2009) · Nanotechnology · doi:10.1088/0957-4484/20/12/125705 · Cited by 407
Prashantha, K., Soulestin, J., Lacrampe, M. F., Krawczak, P., Dupin, G., & Claes, M. (2009) · Composites Science and Technology · doi:10.1016/j.compscitech.2008.10.005 · Cited by 375
Acomb, J. C., Wu, C., & Williams, P. T. (2016) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2015.06.054 · Cited by 331
El Achaby, M., Arrakhiz, F., Vaudreuil, S., el Kacem Qaiss, A., Bousmina, M., & Fassi‐Fehri, O. (2012) · Polymer Composites · doi:10.1002/pc.22198 · Cited by 322
Salavagione, H. J., Martínez, G., & Gómez, M. A. (2009) · Journal of Materials Chemistry · doi:10.1039/b904232f · Cited by 313
Khan, U., May, P., O’Neill, A., & Coleman, J. N. (2010) · Carbon · doi:10.1016/j.carbon.2010.07.008 · Cited by 309
Self-citationA review of the interfacial characteristics of polymer nanocomposites containing carbon nanotubes
Chen, J., Liu, B., Gao, X., & Xu, D. (2018) · RSC Advances · doi:10.1039/c8ra04205e · Cited by 291
Simulation of interphase percolation and gradients in polymer nanocomposites
Qiao, R., & Catherine Brinson, L. (2009) · Composites Science and Technology · doi:10.1016/j.compscitech.2008.11.022 · Cited by 283
Cano, M., Khan, U., Sainsbury, T., O’Neill, A., Wang, Z., McGovern, I. T., Maser, W. K., Benito, A. M., & Coleman, J. N. (2013) · Carbon · doi:10.1016/j.carbon.2012.09.046 · Cited by 282
Self-citationChemistry of carbon nanotubes in biomedical applications
Wu, H.-C., Chang, X., Liu, L., Zhao, F., & Zhao, Y. (2010) · J. Mater. Chem. · doi:10.1039/b911099m · Cited by 280
Wardle, B. L., Saito, D. S., García, E. J., Hart, A. J., de Villoria, R. G., & Verploegen, E. A. (2008) · Advanced Materials · doi:10.1002/adma.200800295 · Cited by 273
Chae, H. G., Sreekumar, T. V., Uchida, T., & Kumar, S. (2005) · Polymer · doi:10.1016/j.polymer.2005.08.092 · Cited by 271
Wu, C.-S., & Liao, H.-T. (2007) · Polymer · doi:10.1016/j.polymer.2007.06.004 · Cited by 264
Processing of nanostructured polymers and advanced polymeric based nanocomposites
Peponi, L., Puglia, D., Torre, L., Valentini, L., & Kenny, J. M. (2014) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2014.08.002 · Cited by 257
Charged Carbon Nanomaterials: Redox Chemistries of Fullerenes, Carbon Nanotubes, and Graphenes
Clancy, A. J., Bayazit, M. K., Hodge, S. A., Skipper, N. T., Howard, C. A., & Shaffer, M. S. P. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00128 · Cited by 256
Bartholome, C., Miaudet, P., Derré, A., Maugey, M., Roubeau, O., Zakri, C., & Poulin, P. (2008) · Composites Science and Technology · doi:10.1016/j.compscitech.2008.05.021 · Cited by 91
Optimized nanoscale composite behaviour in limpet teeth
Lu, D., & Barber, A. H. (2012) · Journal of The Royal Society Interface · doi:10.1098/rsif.2011.0688 · Cited by 62
Metadata
- Authors
- Coleman, J. N., Cadek, M., Blake, R., Nicolosi, V., Ryan, K. P., Belton, C., Fonseca, A., Nagy, J. B., Gun'ko, Y. K., & Blau, W. J.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2004-08
- Volume
- 14
- Issue
- 8
- Pages
- 791-798
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W1982176563
- Cited by
- 610
- References
- 14
- FWCI
- 16.25
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.