The DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.
Solution‐Processed Full‐Color Polymer Organic Light‐Emitting Diode Displays Fabricated by Direct Photolithography
Abstract
The first full‐color polymer organic light‐emitting diode (OLED) display is reported, fabricated by a direct photolithography process, that is, a process that allows direct structuring of the electroluminescent layer of the OLED by exposure to UV light. The required photosensitivity is introduced by attaching oxetane side groups to the backbone of red‐, green‐, and blue‐light‐emitting polymers. This allows for the use of photolithography to selectively crosslink thin films of these polymers. Hence the solution‐based process requires neither an additional etching step, as is the case for conventional photoresist lithography, nor does it rely on the use of prestructured substrates, which are required if ink‐jet printing is used to pixilate the emissive layer. The process allows for low‐cost display fabrication without sacrificing resolution: Structures with features in the range of 2 μm are obtained by patterning the emitting polymers via UV illumination through an ultrafine shadow mask. Compared to state‐of‐the‐art fluorescent OLEDs, the display prototype (pixel size 200 μm × 600 μm) presented here shows very good efficiency as well as good color saturation for all three colors. The application in solid‐state lighting is also possible: Pure white light [Commision Internationale de l'Éclairage (CIE) values of 0.33, 0.33 and color rendering index (CRI) of 76] is obtained at an efficiency of 5 cd A–1 by mixing the three colors in the appropriate ratio. For further enhancement of the device efficiency, an additional hole‐transport layer (HTL), which is also photo‐crosslinkable and therefore suitable to fabricate multilayer devices from solution, is embedded between the anode and the electroluminescent layer.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The path to ubiquitous and low-cost organic electronic appliances on plastic
Forrest, S. R. (2004) · Nature · doi:10.1038/nature02498 · Cited by 5,165
Ultrathin Organic Films Grown by Organic Molecular Beam Deposition and Related Techniques
Forrest, S. R. (1997) · Chemical Reviews · doi:10.1021/cr941014o · Cited by 1,866
Organic electroluminescent devices with improved stability
Slyke, S. A. V., Chen, C. H., & Tang, C. W. (1996) · Applied Physics Letters · doi:10.1063/1.117151 · Cited by 1,426
Multi-colour organic light-emitting displays by solution processing
Müller, C. D., Falcou, A., Reckefuss, N., Rojahn, M., Wiederhirn, V., Rudati, P., Frohne, H., Nuyken, O., Becker, H., & Meerholz, K. (2003) · Nature · doi:10.1038/nature01390 · Cited by 1,110
Self-citationHighly Efficient Green‐Emitting Phosphorescent Iridium Dendrimers Based on Carbazole Dendrons
Ding, J., Gao, J., Cheng, Y., Xie, Z., Wang, L., Ma, D., Jing, X., & Wang, F. (2006) · Advanced Functional Materials · doi:10.1002/adfm.200500591 · Cited by 315
Kim, J., Friend, R. H., Grizzi, I., & Burroughes, J. H. (2005) · Applied Physics Letters · doi:10.1063/1.1992658 · Cited by 295
Large area, high resolution, dry printing of conducting polymers for organic electronics
Blanchet, G. B., Loo, Y.-L., Rogers, J. A., Gao, F., & Fincher, C. R. (2003) · Applied Physics Letters · doi:10.1063/1.1533110 · Cited by 257
New iridium complex as high-efficiency red phosphorescent emitter in polymer light-emitting devices
Liang, B., Jiang, C., Chen, Z., Zhang, X., Shi, H., & Cao, Y. (2006) · Journal of Materials Chemistry · doi:10.1039/b515549e · Cited by 110
Cited by
Recent Advances in White Organic Light‐Emitting Materials and Devices (WOLEDs)
Kamtekar, K. T., Monkman, A. P., & Bryce, M. R. (2010) · Advanced Materials · doi:10.1002/adma.200902148 · Cited by 1,054
White organic light-emitting diodes: Status and perspective
Reineke, S., Thomschke, M., Lüssem, B., & Leo, K. (2013) · Reviews of Modern Physics · doi:10.1103/revmodphys.85.1245 · Cited by 659
Ikeda, N., Oda, S., Matsumoto, R., Yoshioka, M., Fukushima, D., Yoshiura, K., Yasuda, N., & Hatakeyama, T. (2020) · Advanced Materials · doi:10.1002/adma.202004072 · Cited by 383
Color generation via subwavelength plasmonic nanostructures
Gu, Y., Zhang, L., Yang, J. K. W., Yeo, S. P., & Qiu, C.-W. (2015) · Nanoscale · doi:10.1039/c5nr00578g · Cited by 311
Colors with plasmonic nanostructures: A full-spectrum review
Song, M., Wang, D., Peana, S., Choudhury, S., Nyga, P., Kudyshev, Z. A., Yu, H., Boltasseva, A., Shalaev, V. M., & Kildishev, A. V. (2019) · Applied Physics Reviews · doi:10.1063/1.5110051 · Cited by 212
Metadata
- Authors
- Gather, M. C., Köhnen, A., Falcou, A., Becker, H., & Meerholz, K.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2007-01-17
- Volume
- 17
- Issue
- 2
- Pages
- 191-200
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2151282706
- Cited by
- 305
- References
- 8
- FWCI
- 23.94
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Solution‐Processed Full‐Color Polymer Organic Light‐Emitting Diode Displays Fabricated by Direct Photolithography. https://app.cochat.ai/papers/10.1002/adfm.200600651
- The paper
- Gather, M. C., Köhnen, A., Falcou, A., Becker, H., & Meerholz, K. (2007). Solution‐Processed Full‐Color Polymer Organic Light‐Emitting Diode Displays Fabricated by Direct Photolithography. Advanced Functional Materials. https://doi.org/10.1002/adfm.200600651
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.