The DOI matches its Crossref record; 19 of the 19 references it cites were found in a registry or an index.
α‐Fe2O3 Nanoflakes as an Anode Material for Li‐Ion Batteries
Abstract
Nanoflakes of α‐Fe 2 O 3 were prepared on Cu foil by using a thermal treatment method. The nanoflakes were characterized by X‐ray diffraction, scanning electron microscopy, high‐resolution transmission electron microscopy, and Raman spectroscopy. The reversible Li‐cycling properties of the α‐Fe 2 O 3 nanoflakes have been evaluated by cyclic voltammery, galvanostatic discharge–charge cycling, and impedance spectral measurements on cells with Li metal as the counter and reference electrodes, at ambient temperature. Results show that Fe 2 O 3 nanoflakes exhibit a stable capacity of (680 ± 20) mA h g–1, corresponding to (4.05 ± 0.05) moles of Li per mole of Fe 2 O 3 with no noticeable capacity fading up to 80 cycles when cycled in the voltage range 0.005–3.0 V at 65 mA g–1 (0.1 C rate), and with a coulombic efficiency of > 98 % during cycling (after the 15th cycle). The average discharge and charge voltages are 1.2 and 2.1 V, respectively. The observed cyclic voltammograms and impedance spectra have been analyzed and interpreted in terms of the ‘conversion reaction' involving nanophase Fe 0–Li 2 O. The superior performance of Fe 2 O 3 nanoflakes is clearly established by a comparison of the results with those for Fe 2 O 3 nanoparticles and nanotubes reported in the literature.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Nanostructured materials for advanced energy conversion and storage devices
Aricò, A. S., Bruce, P., Scrosati, B., Tarascon, J.-M., & van Schalkwijk, W. (2005) · Nature Materials · doi:10.1038/nmat1368 · Cited by 8,826
Nano-sized transition-metal oxides as negative-electrode materials for lithium-ion batteries
Poizot, P., Laruelle, S., Grugeon, S., Dupont, L., & Tarascon, J.-M. (2000) · Nature · doi:10.1038/35035045 · Cited by 8,041
Taberna, P. L., Mitra, S., Poizot, P., Simon, P., & Tarascon, J.-M. (2006) · Nature Materials · doi:10.1038/nmat1672 · Cited by 2,010
α‐Fe2O3 Nanotubes in Gas Sensor and Lithium‐Ion Battery Applications
Chen, J., Xu, L., Li, W., & Gou, X. (2005) · Advanced Materials · doi:10.1002/adma.200401101 · Cited by 1,605
Effect of Particle Size on Lithium Intercalation into α-Fe[sub 2]O[sub 3]
Larcher, D., Masquelier, C., Bonnin, D., Chabre, Y., Masson, V., Leriche, J.-B., & Tarascon, J.-M. (2003) · Journal of The Electrochemical Society · doi:10.1149/1.1528941 · Cited by 622
Levi, M. D., & Aurbach, D. (1997) · The Journal of Physical Chemistry B · doi:10.1021/jp9701909 · Cited by 558
Photoelectrochemical Splitting of Water at Nanocrystalline n-Fe2O3 Thin-Film Electrodes
Khan, S. U. M., & Akikusa, J. (1999) · The Journal of Physical Chemistry B · doi:10.1021/jp990066k · Cited by 368
Nickel‐Foam‐Supported Reticular CoO–Li2O Composite Anode Materials for Lithium Ion Batteries
Yu, Y., Chen, C., Shui, J., & Xie, S. (2005) · Angewandte Chemie International Edition · doi:10.1002/anie.200501905 · Cited by 329
Sulphur-polypyrrole composite positive electrode materials for rechargeable lithium batteries
Wang, J., Chen, J., Konstantinov, K., Zhao, L., Ng, S. H., Wang, G. X., Guo, Z. P., & Liu, H. K. (2006) · Electrochimica Acta · doi:10.1016/j.electacta.2005.12.046 · Cited by 284
Shaju, K. M., Rao, G. V. S., & Chowdari, B. V. R. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1775218 · Cited by 281
Self-citationA study on the charge–discharge mechanism of Co3O4 as an anode for the Li ion secondary battery
Kang, Y.-M., Song, M.-S., Kim, J.-H., Kim, H.-S., Park, M.-S., Lee, J.-Y., Liu, H. K., & Dou, S. X. (2005) · Electrochimica Acta · doi:10.1016/j.electacta.2005.01.012 · Cited by 269
Controlled Growth and Field‐Emission Properties of Cobalt Oxide Nanowalls
Yu, T., Zhu, Y. W., Xu, X. J., Shen, Z. X., Chen, P., Lim, C. ‐., Thong, J. T. ‐., & Sow, C. ‐. (2005) · Advanced Materials · doi:10.1002/adma.200500322 · Cited by 268
Self-citationLiu, L., Kou, H.-Z., Mo, W., Liu, H., & Wang, Y. (2006) · The Journal of Physical Chemistry B · doi:10.1021/jp0627473 · Cited by 245
Koltypin, M., Aurbach, D., Nazar, L., & Ellis, B. (2007) · Electrochemical and Solid-State Letters · doi:10.1149/1.2403974 · Cited by 189
Effect of AlPO-coating on cathodic behaviour of Li(NiCo)O
TAN, K., Reddy, M. V., RAO, G., & Chowdari, B. V. R. (2004) · Journal of Power Sources · doi:10.1016/j.jpowsour.2004.08.044 · Cited by 155
Self-citationElectrochemical Performance of Co[sub 3]O[sub 4]–C Composite Anode Materials
Needham, S. A., Wang, G., Konstantinov, K., Tournayre, Y., Lao, Z., & Liu, H. (2006) · Electrochemical and Solid-State Letters · doi:10.1149/1.2197108 · Cited by 128
Watanabe, A., & Kozuka, H. (2003) · The Journal of Physical Chemistry B · doi:10.1021/jp0303568 · Cited by 125
An AC Impedance Spectroscopic Study of LixCoO2 at Different Temperatures
Nobili, F., Tossici, R., Marassi, R., et al. (2002) · The Journal of Physical Chemistry B · doi:10.1021/jp013569a · Cited by 97
Mesoporous SnO2 Synthesized with Non-ionic Surfactants as an Anode Material for Lithium Batteries
Subramanian, V., Jiang, J., Smith, P. H., & Rambabu, B. (2004) · Journal of Nanoscience and Nanotechnology · doi:10.1166/jnn.2004.045 · Cited by 21
Cited by
Advanced Materials for Energy Storage
Liu, C., Li, F., Ma, L., & Cheng, H. (2010) · Advanced Materials · doi:10.1002/adma.200903328 · Cited by 4,765
Metal Oxides and Oxysalts as Anode Materials for Li Ion Batteries
Reddy, M. V., Subba Rao, G. V., & Chowdari, B. V. R. (2013) · Chemical Reviews · doi:10.1021/cr3001884 · Cited by 2,921
Self-citationCabana, J., Monconduit, L., Larcher, D., & Palacín, M. R. (2010) · Advanced Materials · doi:10.1002/adma.201000717 · Cited by 2,361
Cao, S.-W., & Zhu, Y.-J. (2010) · Nanoscale Research Letters · doi:10.1007/s11671-010-9742-7 · Cited by 2,357
Mixed Transition‐Metal Oxides: Design, Synthesis, and Energy‐Related Applications
Yuan, C., Wu, H. B., Xie, Y., & Lou, X. W. (. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201303971 · Cited by 2,304
Metadata
- Authors
- Reddy, M. V., Yu, T., Sow, C. H., Shen, Z. X., Lim, C. T., Subba Rao, G. V., & Chowdari, B. V. R.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2007-08-17
- Volume
- 17
- Issue
- 15
- Pages
- 2792-2799
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2016895472
- Cited by
- 1,064
- References
- 19
- FWCI
- 27.09
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.