The DOI matches its Crossref record.
Long‐Cycle Electrochemical Behavior of Multiwall Carbon Nanotubes Synthesized on Stainless Steel in Li Ion Batteries
Abstract
Carbon nanotubes (CNTs) are considered to be excellent candidates for high performance electrode materials in Li ion batteries. The nanometer‐sized pore structures of CNTs can provide the hosting sites for storing large numbers of Li ions. A short diffusion distance for the Li ions may bring about a high discharge rate. The long‐cycle performance of aligned multiwalled carbon nanotubes (MWNTs) directly synthesized on stainless‐steel foil as an anode material in lithium battery is demonstrated. An increase in the specific capacity with an increase in the cycle number is observed. Starting at a value of 132 mA hg−1 in the first cycle at a current rate of 1 C, the specific capacity increased about 250% to a value of 460 mA hg−1 after 1 200 cycles. This is an unusual but a welcoming behavior for battery applications. It is found that the morphology of the MWNTs with structural and surface defects and the stainless‐steel substrate play an important role in enhancing the capacity during the cycling process.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Jiang, J., Li, Y., Liu, J., Huang, X., Yuan, C., & Lou, X. W. (. (2012) · Advanced Materials · doi:10.1002/adma.201202146 · Cited by 2,473
Graphene/metal oxide composite electrode materials for energy storage
Wu, Z.-S., Zhou, G., Yin, L.-C., Ren, W., Li, F., & Cheng, H.-M. (2012) · Nano Energy · doi:10.1016/j.nanoen.2011.11.001 · Cited by 1,836
Carbon Nanomaterials for Advanced Energy Conversion and Storage
Dai, L., Chang, D. W., Baek, J., & Lu, W. (2012) · Small · doi:10.1002/smll.201101594 · Cited by 1,546
Izadi‐Najafabadi, A., Yasuda, S., Kobashi, K., Yamada, T., Futaba, D. N., Hatori, H., Yumura, M., Iijima, S., & Hata, K. (2010) · Advanced Materials · doi:10.1002/adma.200904349 · Cited by 631
Carbon materials for ion-intercalation involved rechargeable battery technologies
Wang, G., Yu, M., & Feng, X. (2021) · Chemical Society Reviews · doi:10.1039/d0cs00187b · Cited by 536
In Situ TEM Experiments of Electrochemical Lithiation and Delithiation of Individual Nanostructures
Liu, X. H., Liu, Y., Kushima, A., Zhang, S., Zhu, T., Li, J., & Huang, J. Y. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201200024 · Cited by 408
Zhao, Y., Li, X., Yan, B., Li, D., Lawes, S., & Sun, X. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.10.008 · Cited by 356
Jiang, J., Zhu, J., Ai, W., Fan, Z., Shen, X., Zou, C., Liu, J., Zhang, H., & Yu, T. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee00602j · Cited by 323
Carbon Nanomaterials in Different Dimensions for Electrochemical Energy Storage
Ni, J., & Li, Y. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600278 · Cited by 304
Wang, X., & Yushin, G. (2015) · Energy & Environmental Science · doi:10.1039/c5ee01254f · Cited by 289
Evaluating the performance of nanostructured materials as lithium-ion battery electrodes
Armstrong, M. J., O’Dwyer, C., Macklin, W. J., & Holmes, J. D. (2014) · Nano Research · doi:10.1007/s12274-013-0375-x · Cited by 285
A review – Synthesis of carbon nanotubes from plastic wastes
Bazargan, A., & McKay, G. (2012) · Chemical Engineering Journal · doi:10.1016/j.cej.2012.03.077 · Cited by 267
High-Power Supercapacitor Electrodes from Single-Walled Carbon Nanohorn/Nanotube Composite
Izadi-Najafabadi, A., Yamada, T., Futaba, D. N., Yudasaka, M., Takagi, H., Hatori, H., Iijima, S., & Hata, K. (2011) · ACS Nano · doi:10.1021/nn1017457 · Cited by 266
Metadata
- Authors
- Masarapu, C., Subramanian, V., Zhu, H., & Wei, B.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2009-04
- Volume
- 19
- Issue
- 7
- Pages
- 1008-1014
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2129246284
- Cited by
- 171
- References
- 0
- FWCI
- 13.20
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.