The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Impact of Bi Deficiencies on Ferroelectric Resistive Switching Characteristics Observed at p‐Type Schottky‐Like Pt/Bi1–δFeO3 Interfaces
Abstract
This work reports a resistive switching effect observed at rectifying Pt/Bi 1–δ FeO 3 interfaces and the impact of Bi deficiencies on its characteristics. Since Bi deficiencies provide hole carriers in BiFeO 3, Bi‐deficient Bi 1–δ FeO 3 films act as a p‐type semiconductor. As the Bi deficiency increased, a leakage current at Pt/Bi 1–δ FeO 3 interfaces tended to increase, and finally, rectifying and hysteretic current–voltage (I–V) characteristics were observed. In I–V characteristics measured at a voltage‐sweep frequency of 1 kHz, positive and negative current peaks originating from ferroelectric displacement current were observed under forward and reverse bias prior to set and reset switching processes, respectively, suggesting that polarization reversal is involved in the resistive switching effect. The resistive switching measurements in a pulse‐voltage mode revealed that the switching speed and switching ratio can be improved by controlling the Bi deficiency. The resistive switching devices showed endurance of >10 5 cycles and data retention of >10 5 s at room temperature. Moreover, unlike conventional resistive switching devices made of metal oxides, no forming process is needed to obtain a stable resistive switching effect in the ferroelectric resistive switching devices. These results demonstrate promising prospects for application of the ferroelectric resistive switching effect at Pt/Bi 1–δ FeO 3 interfaces to nonvolatile memory.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Strukov, D. B., Snider, G. S., Stewart, D. R., & Williams, R. S. (2008) · Nature · doi:10.1038/nature06932 · Cited by 11,828
Redox‐Based Resistive Switching Memories – Nanoionic Mechanisms, Prospects, and Challenges
Waser, R., Dittmann, R., Staikov, G., & Szot, K. (2009) · Advanced Materials · doi:10.1002/adma.200900375 · Cited by 5,080
Nanoionics-based resistive switching memories
Waser, R., & Aono, M. (2007) · Nature Materials · doi:10.1038/nmat2023 · Cited by 4,923
Atomic structure of conducting nanofilaments in TiO2 resistive switching memory
Kwon, D.-H., Kim, K. M., Jang, J. H., Jeon, J. M., Lee, M. H., Kim, G. H., Li, X.-S., Park, G.-S., Lee, B., Han, S., et al. (2010) · Nature Nanotechnology · doi:10.1038/nnano.2009.456 · Cited by 2,092
Cited by
A comprehensive review on emerging artificial neuromorphic devices
Zhu, J., Zhang, T., Yang, Y., & Huang, R. (2020) · Applied Physics Reviews · doi:10.1063/1.5118217 · Cited by 758
Standards for the Characterization of Endurance in Resistive Switching Devices
Lanza, M., Waser, R., Ielmini, D., Yang, J. J., Goux, L., Suñe, J., Kenyon, A. J., Mehonic, A., Spiga, S., Rana, V., et al. (2021) · ACS Nano · doi:10.1021/acsnano.1c06980 · Cited by 262
Metadata
- Authors
- Tsurumaki, A., Yamada, H., & Sawa, A.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2012-01-18
- Volume
- 22
- Issue
- 5
- Pages
- 1040-1047
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2122290679
- Cited by
- 183
- References
- 4
- FWCI
- 12.41
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Impact of Bi Deficiencies on Ferroelectric Resistive Switching Characteristics Observed at p‐Type Schottky‐Like Pt/Bi1–δFeO3 Interfaces. https://app.cochat.ai/papers/10.1002/adfm.201102883
- The paper
- Tsurumaki, A., Yamada, H., & Sawa, A. (2012). Impact of Bi Deficiencies on Ferroelectric Resistive Switching Characteristics Observed at p‐Type Schottky‐Like Pt/Bi1–δFeO3 Interfaces. Advanced Functional Materials. https://doi.org/10.1002/adfm.201102883
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.